XINLEI Full Motion TV Wall Mount MA1343

مقدمة

Thank you for choosing the XINLEI Full Motion TV Wall Mount. This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your new TV wall mount. Please read this manual thoroughly before installation and keep it for future reference.

معلومات السلامة

Improper installation or use of this product may result in serious injury or damage. Please adhere to the following safety guidelines:

• تأكد من أن سطح التثبيت يمكنه تحمل الوزن الإجمالي للحامل والتلفزيون بشكل آمن.
• WARNING: DO NOT install into drywall alone. This mount is designed for installation on single wood studs or solid concrete/brick walls.
• Always use appropriate safety equipment, such as safety glasses, during installation.
• Follow all installation steps carefully. If you are unsure about any part of the installation, seek professional assistance.
• لا تتجاوز الحد الأقصى للوزن وهو 44 رطلاً (20 كجم).
• Do not mount TVs smaller than 13 inches or larger than 42 inches.
• احتفظ بالأطفال والحيوانات الأليفة بعيدًا عن منطقة التثبيت.
• Regularly check the mount for any signs of wear, damage, or loose connections.

محتويات الحزمة

Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, please contact customer support.

• TV Wall Mount Assembly (Articulating Arm and Wall Plate)
• TV Plate (attaches to TV)
• Mounting Hardware Kit (various screws, anchors, washers, spacers for TV and wall)
• دليل التعليمات

الصورة: أكثر منview of the XINLEI Full Motion TV Wall Mount, showing the wall plate, articulating arm, and TV mounting plate.

مميزات المنتج

The XINLEI Full Motion TV Wall Mount offers versatile positioning and robust support for your television:

• التوافق العالمي: Ideal for most 13-42 inch monitors and TVs with VESA patterns from 75x75mm to 200x200mm, supporting up to 44 lbs. Compatible with brands such as SAMSUNG, SONY, LG, VIZIO, TCL, and more.
• مرن Viewتجربة جي: Allows for Tilt +/-10°, Swivel +/-90°, Extension from 2.36” to 16”, and 360° Rotation, providing optimal viewing angles from various positions.
• تصميم موفر للمساحة: Retracts to a low profile of 2.36” from the wall and extends up to 16” for flexible viewing. The single-stud design is suitable for corner installations or areas with limited stud availability.
• بناء متين: Made from heavy-duty steel with thickened arms, ensuring reliable support and long-lasting performance. All components pass strict testing procedures.

Image: Demonstrates the 360° rotation and 180° swivel capabilities of the TV mount, highlighting flexible viewزوايا متعددة.

Image: Illustrates the mount's ability to retract to 2.36 inches and extend up to 16 inches, along with a +/-10° tilt adjustment for anti-glare viewعمل.

تحديد

Image: Detailed diagrams illustrating various VESA mounting patterns supported by the mount, including 75x75mm, 100x100mm, 100x200mm, 200x100mm, and 200x200mm.

Image: Visual representation of the mount's key specifications, including maximum weight capacity (44 lbs), compatible TV size (13"-42"), tilt angle (±10°), swivel (±180°), rotation (360°), and arm dimensions.

الإعداد والتثبيت

This section guides you through the installation process. It is recommended to have a second person assist with hanging the TV.

أنواع الجدران المتوافقة:

• Single Wood Stud
• Solid Concrete Wall
• جدار من الطوب

Important: Do not mount on drywall alone!

Image: Visual guide showing the compatible wall types for installation: wood studs, concrete walls, and brick walls, with a clear warning against drywall-only installation.

خطوات التثبيت:

1. Step 1: Install the TV Plate to your TV.

   Carefully attach the TV plate to the back of your television using the appropriate screws and spacers from the hardware kit. Ensure the plate is centered and securely fastened to the VESA mounting holes on your TV.

2. Step 2: Mount the Wall Plate to the Wall.

   Locate a suitable mounting position on a wood stud, concrete, or brick wall. Use a stud finder if mounting to a wood stud. Mark the drilling points for the wall plate. Drill pilot holes and secure the wall plate using the provided lag bolts and anchors (for concrete/brick). Ensure the wall plate is level and firmly attached to the wall.

3. Step 3: Hang the TV onto the Wall Mount.

   With assistance, carefully lift the television with the attached TV plate and hook it onto the articulating arm assembly. Ensure the TV plate securely engages with the mount. Tighten any safety screws or locking mechanisms to prevent accidental dislodgement.

Image: A visual guide demonstrating the three main steps of installation: installing the TV plate, wall mounting the arm, and hanging the TV.

تعليمات التشغيل

Once installed, your XINLEI Full Motion TV Wall Mount allows for various adjustments to achieve your desired viewزاوية جي:

• الامتداد والانكماش: Gently pull the TV away from the wall to extend the arm up to 16 inches, or push it back towards the wall to retract it to a minimum of 2.36 inches.
• تعديل الدوران: Pivot the TV left or right up to 90 degrees in either direction to direct the screen towards your viewمنطقة ing.
• تعديل الميل: Loosen the tilt knobs on the TV plate, adjust the screen up or down by +/-10 degrees to reduce glare or optimize viewing, then re-tighten the knobs to secure the angle.
• تناوب: The TV plate allows for a full 360-degree rotation, enabling you to switch between landscape and portrait orientations if desired.

Images: Visual representations of the mount's swivel, tilt, and rotation capabilities, allowing for flexible TV positioning.

صيانة

To ensure the longevity and safe operation of your TV wall mount, perform the following maintenance:

• التفتيش الدوري: Periodically check all screws and bolts to ensure they remain tight. Over time, vibrations or adjustments can cause fasteners to loosen.
• تنظيف: Wipe the mount with a soft, dry cloth to remove dust. For stubborn marks, a slightly damp يمكن استخدام قطعة قماش، ثم تجفيفها. تجنب استخدام المنظفات أو المذيبات الكاشطة.
• تشحيم: If the articulating arm or swivel points become stiff, apply a small amount of silicone-based lubricant to the moving parts.

استكشاف الأخطاء وإصلاحها

إذا واجهت مشاكل مع حامل التلفزيون الجداري، فراجع المشاكل والحلول الشائعة التالية:

• مشكلة: التلفزيون ليس مستويًا بعد التثبيت.

  حل: Check the wall plate's levelness. If the wall plate is level, adjust the TV plate's rotation or tilt mechanism if available, or slightly loosen and re-tighten the TV mounting screws to allow for minor adjustments before securing them firmly.
• مشكلة: يبدو الحامل مرتخياً أو متذبذباً.

  حل: Immediately remove the TV. Re-check all wall mounting bolts and TV plate screws for tightness. Ensure the wall type is appropriate and that the anchors (if used) are properly installed. If mounting to a wood stud, verify the stud's integrity. If the issue persists, consult a professional installer.

• مشكلة: Difficulty adjusting the arm (stiff movement).

  حل: Apply a small amount of silicone-based lubricant to the joints of the articulating arm. Ensure no cables are snagged or obstructing movement. Check if any bolts on the arm joints are overtightened; loosen slightly if necessary, but ensure they remain secure enough to hold the TV's position.

الضمان والدعم

XINLEI is committed to providing high-quality products. This product has undergone strict testing procedures to ensure its durability and safety.

For any questions, concerns, or assistance with your XINLEI Full Motion TV Wall Mount, please do not hesitate to contact our customer support team. We are available to help you with installation, troubleshooting, or any product-related inquiries.

يرجى الرجوع إلى عبوة المنتج أو إلى دليل البائع. webالموقع للحصول على تفاصيل الضمان المحددة ومعلومات الاتصال.