1. المقدمة
Thank you for choosing the QREZAA Electric Towel Warmer. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new towel warmer. Please read this manual thoroughly before installation and keep it for future reference.
Image 1.1: The QREZAA Electric Towel Warmer, showcasing its four rotating bars and the digital control panel, along with a smartphone displaying the companion app interface.
2. معلومات السلامة
WARNING: Failure to follow these safety instructions could result in fire, electric shock, injury, or damage to the product.
- There is a risk of personal injury or damage to items. Please carefully read all installation guidelines before installation.
- There is a risk of electric shock in the product, and all wiring must be connected by a certified electrician.
- There is a risk of electric shock in the product, and the power must be turned off during installation, maintenance, or repair.
- The yellow-green wire is the grounding wire (PE), and the other two lines are reliably connected to the indoor power live line (L) and neutral line (N).
- To ensure the safe use of the product, only connect the product to a circuit with an automatic leakage protection switch.
- This product is only for indoor installation and use.
- Children, the elderly, and those with limited mobility should use this product under supervision. To avoid harm to infants, the product should be installed so that the lowest point of the electric towel rack is at least 600 millimeters (23.6 inches) above the ground.
3. مواصفات المنتج
- بناء متين: Made with 304 stainless steel and treated with a powder-coated surface, ensuring corrosion-proof and IPX4 water-proof performance for long service life.
- تصميم قابل للدوران: Features 4 rack bars that can rotate 180°, offering flexible and smooth rotation to maximize space utilization, especially in smaller bathrooms.
- Intelligent Touch Screen Control: Equipped with an LED display for easy operation. Includes a timing function (1-24 hours) and temperature control (115°F-145°F), adjustable in 5°F increments.
- اتصال ذكي بشبكة الواي فاي: Control your towel warmer remotely by downloading and installing the "Smart Life" APP. Connect your phone via WiFi and Bluetooth to add and manage the device.
- التدفئة الموفرة للطاقة: Utilizes carbon fiber heating technology for even and rapid heating, saving approximately 30% energy compared to traditional water injection methods. Power consumption is only 75W.
- التثبيت المخفي: Designed for a sleek, wall-mounted, concealed installation that saves space and integrates beautifully with your bathroom decor.
- مميزات السلامة: Includes built-in anti-leak technology, accurate temperature control, overheating protection, high voltage protection, and anti-scalding spray paint on the surface to prevent burns and ensure safety.
Image 3.1: Illustration of the 180° rotating capability of the towel warmer bars, allowing for flexible positioning and easy access.
Image 3.2: Visual representation of the towel warmer's heating characteristics, including rapid heating, anti-scalding properties, even heat distribution, and its gentle effect on fabrics.
Image 3.3: The towel warmer bars with water droplets, illustrating its IPX4 waterproof rating and safe, anti-leakage design.
4. محتويات العبوة
Please check the package contents upon unboxing to ensure all parts are present and undamaged:
- Heated Towel Bars (4 units)
- Main Control Unit (with digital display)
- Pre-install Part / Mounting Base
- حوامل التثبيت
- Decorative Flanges
- أدوات التثبيت (البراغي، مثبتات الحائط)
- دليل المستخدم
الصورة 4.1: تفصيلية view of all components included in the package, such as the towel bars, control unit, and mounting accessories.
5. المواصفات
| المعلمة | قيمة |
|---|---|
| نموذج | FK-015-4 |
| لون | أسود |
| مادة | الفولاذ المقاوم للصدأ |
| القدرة المقدرة | 75 واط |
| المجلدtage | 110V (Note: The product image indicates 220V, but for US market, 110V is standard. Please verify your local voltage requirements.) |
| تكرار | 50 - 60 هرتز |
| نطاق درجة حرارة التدفئة | 115 درجة فهرنهايت - 145 درجة فهرنهايت (45 درجة مئوية - 60 درجة مئوية) |
| وظيفة المؤقت | من ساعة ونصف إلى ساعتين ونصف |
| تصنيف IP | IPX4 (مقاوم للرذاذ) |
| نوع التثبيت | Concealed / Embedded Wall Mount |
| أبعاد المنتج (الطول × العرض × الارتفاع) | 20 بوصة × 2.4 بوصة × 27.5 بوصة (51 سم × 6.3 سم × 70 سم) |
| وزن العنصر | 9.88 رطل |
Image 5.1: Detailed dimensions of the towel warmer, including overall length, width, and height of the bars and control unit.
6. الإعداد والتثبيت
This towel warmer is designed for concealed installation. Professional installation by a certified electrician is highly recommended.
خطوات التثبيت:
- تحضير الحائط: Excavate a groove in the wall at the desired installation position, matching the width, depth, and height shown in the diagram. Ensure the embedded box is level with the cement wall.
- Install Embedded Parts: Adjust the level of the embedded box in all directions. Mark and drill two fixed holes, then install wall anchors. Fix the embedded parts with self-tapping screws, and confirm the level of the embedded parts in all directions again.
- التوصيلات الكهربائية: Ensure the power is completely turned off at the main circuit breaker. Correctly connect the grounding wire (yellow-green), live wire (L), and neutral wire (N) to the corresponding terminals.
- Secure Embedded Parts: Use cement mortar to bury the embedded parts, and stick the cement mortar to the first page for the size and position of the holes. Pay attention to protecting the threaded holes, installation seats, and power cord plugs from impurities.
- Assemble and Mount: Take out the component from the package and insert the decorative fringe into the mounting bracket. Connect and tighten the aviation plug. Push in each towel bar, adjust its level using a spirit level, and tighten the fixing screws to secure it.
نصائح التثبيت:
- يجب أن يتم تركيب هذا المنتج بواسطة كهربائي معتمد.
- A leakage protection switch must be installed on the power terminal.
- All heating conductors and controllers must be correctly connected to the docking plugs of the mounting base before power can be applied.
- Early signs of the connectors are oxidized; power on may damage the appliance.
- Be sure to avoid damaging the original equipment in the wall, including but not limited to wires and water pipes.
- Reserve the tile opening size. The diameter of the opening is 40-45mm, and the center distance between the two holes is 150mm.
Image 6.1: Excerpt from the installation manual showing product parameters, dimensions, and initial precautions for installation.
Image 6.2: Step-by-step visual guide for the concealed installation of the towel warmer, including wall preparation, wiring, and final assembly.
7. تعليمات التشغيل
The QREZAA Electric Towel Warmer features a user-friendly touch screen control panel and smart WiFi connectivity.
التحكم اليدوي:
- تشغيل/إيقاف الطاقة: Click the power button on the control panel to activate or deactivate the unit. Long press for 3 seconds to switch on and off.
- ضبط درجة الحرارة: After turning on, click the power button, then click the time key to adjust the temperature. The temperature setting ranges from 115°F to 145°F, increasing by 5°F with each press.
- ضبط التوقيت: Press and hold the time button for 3 seconds to enter the timing setting mode. You can set the timed shutdown work from 1 to 24 hours.
التحكم الذكي عبر شبكة WiFi:
- تحميل التطبيق: Download and install the "Smart Life" APP from your mobile application store (e.g., App Store for iOS, Google Play Store for Android).
- إنشاء حساب: Create an account within the "Smart Life" APP following the on-screen prompts.
- توصيل الجهاز: Ensure your phone is connected to your home WiFi network and Bluetooth is turned on. Open the "Smart Life" APP, then add the device by following the in-app instructions. The app will guide you through the pairing process.
- يتحكم: Once connected, you can use the app to control the power, temperature, and timing functions of your towel warmer remotely.
Image 7.1: Close-up of the towel warmer's digital control panel and a smartphone displaying the "Smart Life" app interface for remote control.
Image 7.2: A hand demonstrating interaction with the towel warmer's control panel, highlighting the ON/OFF, temperature, and timing adjustment functions.
8. الصيانة
Proper maintenance will ensure the longevity and optimal performance of your QREZAA Electric Towel Warmer.
- تنظيف: امسح المنتج بقطعة ناعمة، دamp towel or sponge. Do not use abrasive cleaning agents, grinding powder, strong detergents, oils, or alkaline cleansers, as these can damage the finish.
- Avoid Wetting: Do not wet the product shell directly.
- افصل الجهاز عند عدم استخدامه: If the towel warmer will not be used for an extended period, unplug it from the power source.
- العناية بالقماش: Avoid contact with fabrics containing soap, detergent residue, or other liquids, as these may fade and look like burnt marks. This fading is only the discoloration of residual soap and cleaning solution and does not damage the fabric itself.
9. استكشاف الأخطاء وإصلاحها
إذا واجهت أي مشاكل مع جهاز تدفئة المناشف، يرجى الرجوع إلى المشاكل والحلول الشائعة التالية:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| Towel warmer does not heat or heats insufficiently. | Unit is not powered on; incorrect temperature setting; power supply issue; internal malfunction. | Ensure the unit is powered on (check LED display). Verify the temperature setting is within the operating range (115°F-145°F). Check the circuit breaker and power connection. If the issue persists, contact customer support. |
| Wi-Fi connection fails or app cannot find device. | Incorrect app used; phone not connected to WiFi/Bluetooth; incorrect pairing procedure; network issues. | Ensure you have downloaded the "Smart Life" app. Confirm your phone's WiFi and Bluetooth are enabled. Follow the in-app instructions carefully for device pairing. Try restarting your router and the towel warmer. |
| Towel bars are loose after installation. | Mounting screws not tightened sufficiently; improper installation of embedded parts. | Ensure all fixing screws are securely tightened. If the issue is due to improper embedded part installation, professional assistance may be required to re-secure the unit. |
| Digital display is not working or shows error. | Power interruption; internal control unit issue. | Turn off the power to the unit at the circuit breaker for a few minutes, then restore power. If the display remains problematic, contact customer support. |
10. الضمان والدعم
QREZAA is committed to providing high-quality products. For any warranty claims, technical support, or questions regarding your Electric Towel Warmer, please contact the seller or manufacturer directly through your purchase platform. Please have your order number and product model (FK-015-4) ready when contacting support.
نهدف إلى الرد على جميع الاستفسارات في غضون 24 ساعة.
