مقدمة
The Tilta Nucleus Nano II Control Handle is a versatile accessory designed to enhance your camera and gimbal control. It offers comprehensive support for Nucleus Nano II, Nucleus M, and Nucleus Nano systems, providing dual motor control via a focus dial and motor-compatible joystick. This handle expands power capabilities for the Nano II Hand Wheel through NATO mount contact pins and features multiple mounting points for integration with shoulder rigs or external monitors. It is also gimbal-ready, compatible with DJI RS2 and RS3 Pro via an optional wireless receiver module.
ماذا يوجد في الصندوق
- 1 x Nucleus Nano II Control Handle
- 1 x USB-C Power Cable (30cm)
- 1 × مفتاح ألين
ميزات المنتج والمكونات
Familiarize yourself with the various parts of your Nucleus Nano II Control Handle.
الإعداد والتجميع
تركيب المحرك
Attach the motor to your camera rig using the 15mm rod and rod holder. Ensure the motor's gearing aligns with your lens's gearing. Secure it in place with the tie-down knob.
Powering the Motor
The motor can be powered via the included USB-C to USB-C cable. Connect one end to either Type-C port 1 or 2 on the motor. Port 1 also functions as an output for daisy-chaining power to additional motors. Power can be supplied from a universal power bank holder mounted to your camera cage or a compatible F970/F570 battery plate with a USB-C output. Ensure the motor is powered on; a blinking red and white light indicates it needs calibration.
Pairing the Handwheel to the Motor
To pair the handwheel with the motor, swipe up on the handwheel's main screen, select 'Connect', then '2.4G', and 'Channels'. You can choose 'Auto' to find the cleanest channel or manually select a channel. Press 'Search'. On the motor, double-tap the pairing button. The handwheel display will show a device list. Select the desired motor and press 'Confirm'.
معايرة المحرك
Once paired, the motor needs calibration. Press the pairing button on the motor once to cycle through functions: Green for Iris, Blue for Zoom, Yellow for Other/Unassigned, and Purple for Focus. To calibrate from the handwheel, hold down the Function button for 3 seconds for auto-calibration. For manual calibration (e.g., for lenses without hard stops), swipe up from the home screen, select 'Motor', then 'Focus', and 'Manual Cal'. Follow the on-screen prompts to rotate the lens to minimum and infinity focus points, confirming each step.
تعليمات التشغيل
Handwheel User Interface
The 1.6-inch touchscreen display shows wireless channel, Wi-Fi status, battery information, Bluetooth status, record/standby indicator, and motor parameters for Focus, Zoom, and Iris. Swipe left/right to access additional settings like camera settings (F-stop, Shutter Speed, ISO, White Balance, Resolution, Data Rate, Frames Per Second, Protocol Information) and lens profile (Focal Distance, Lens Brand, Lens Model, F-stop, Focal Length).
Setting Marks
To set focus marks, rotate the handwheel to the desired focal distance and single-press the Function button. A mark will appear on the UI, and you'll receive haptic feedback. Double-press the Function button to delete marks. To set an A/B range, hold the A/B button, rotate to select the range, and single-tap to confirm. Hold the A/B button again to delete the range.
القائمة: الإعدادات
Access the settings menu by swiping up from the main screen and selecting 'Settings'. Here you can 'Calibrate Knob' (for physical wheel limits), adjust 'Brightness' (manual or auto), and configure 'Knob' settings (assign motor control to the dial, reset to default). Other options include 'Rocker' settings (assign motor control to the joystick), 'Vibration' (enable/disable and adjust strength), and 'Standby' mode (set inactivity timeout).
Menu: System
In the 'System' menu, you can view 'Information' (firmware version, run time), change 'Language' (English/Chinese), perform 'Firmware Update', import 'Lens' information, adjust 'Screen Rotation', and perform a 'Factory Reset'.
Menu: Motor
The 'Motor' menu allows you to configure settings for Focus, Iris, and Zoom motors. Options include 'Auto Cal' or 'Manual Cal', 'Torque' adjustment, 'Sync' (view motor number and color), 'Direction' (clockwise/counter-clockwise), and 'Sensitivity'.
Menu: Connect
The 'Connect' menu provides options for '2.4G' (channels, power), 'Bluetooth' (settings, device search), and 'Wi-Fi' (settings, network search) to connect to various devices and networks for firmware updates.
Pairing Nano II Handwheel with (2) Nano II Motors
To pair multiple Nano II motors with the handwheel, power on both motors. On the handwheel, swipe up, select 'Connect', '2.4G', and 'Channels'. Choose a manual channel (e.g., CH1) and press 'Search'. Double-tap the function button on each motor to make them discoverable. Select the motors from the device list on the handwheel and press 'Confirm'. Assign each motor to a function (Iris, Zoom, Focus) by single-pressing the function button on the motor to cycle through colors (Green for Iris, Blue for Zoom, Yellow for Other, Purple for Focus).
Official Tilta video demonstrating the setup and overview of the Nucleus Nano II system, including pairing multiple motors.
Pairing Nano II Control Handle with DJI RS3 Pro
To pair the Nano II Control Handle with a DJI RS3 Pro gimbal, open the menu on the control handle by triple-pressing the power button. Navigate to 'Wireless', then 'EZ Mode'. Double-tap the function button on the Nano II motor to make it discoverable. Select the motor from the device list and press 'Confirm'. Ensure the control handle's mode is set to 'Gimbal Mode' for joystick control of the gimbal.
Nano II Camera Control BMPCC 6K Pro
To control a Blackmagic Pocket Cinema Camera 6K Pro, connect the Nano II motor to the camera via USB-C. On the handwheel, swipe to the camera control page. You can adjust settings like Iris, ISO, and other camera parameters directly from the handwheel.
Nano II Camera Control Sony FX3 / FX30
For Sony FX3/FX30 camera control, ensure the camera's USB connection mode is set to 'PC Remote' and USB power supply is 'On' in the camera's network settings. Connect the Nano II motor to the camera via USB-C. The handwheel will display camera settings, allowing adjustment of F-stop, ISO, and other parameters.
Nano II Camera Control Canon R8
To control a Canon R8, ensure the camera's USB connection application is set to 'Photo Import/Remote Control'. Connect the Nano II motor to the camera via USB-C. The handwheel will allow control over camera settings like F-stop and ISO.
Pairing Nano II with Advanced Ring Grip Handles
To pair the Nano II with Advanced Ring Grip Handles, ensure both devices are on the same 2.4G channel. The handwheel will control the focus motor, and the joystick on the ring grip will control the zoom motor. You can adjust the multiplier settings for both the rocker and range to fine-tune control sensitivity.
Pairing Nano II Handwheel with Mirage Motor
To pair the Nano II Handwheel with the Mirage Motor, ensure both devices are on the same 2.4G channel. The handwheel will control the focus motor, and the joystick will control the variable ND filter on the Mirage motor.
تحديد
| أبعاد المنتج | 7.5 × 5.5 × 3.5 بوصة |
| وزن العنصر | 4.6 أونصة (130 جرامًا) |
| رقم موديل العنصر | WLC-T05-CH |
| ماركة | Tilta |
| لون | أسود |
| الأجهزة المتوافقة | Tilta Nucleus Nano II, Nucleus M, Nucleus Nano, DJI RS2, DJI RS3 Pro |
| رمز المنتج الموحد | 810076278513 |
استكشاف الأخطاء وإصلاحها
- المحرك لا يستجيب: Ensure the motor is properly powered and paired to the handwheel on the correct channel. Check USB-C cable connections.
- مشاكل المعايرة: Re-run auto-calibration. For lenses without hard stops, perform manual calibration by setting minimum and infinity focus points.
- Handwheel display not working: Check battery level. Ensure the handwheel is powered on.
- Difficulty with menu navigation: Ensure the knob is calibrated. Adjust screen brightness for better visibility.
- فشل تحديث البرامج الثابتة: Ensure a stable Wi-Fi connection. Follow the manual update procedure via USB-C if Wi-Fi update fails.
- انحراف عصا التحكم: Calibrate the joystick through the menu settings.
الضمان والدعم
Tilta products are covered by a limited warranty against defects in materials and workmanship. For specific warranty details, duration, and terms, please refer to the official Tilta website or contact Tilta customer support directly. Keep your proof of purchase for warranty claims. For technical assistance, troubleshooting, or service inquiries, please visit the Tilta support portal or contact their customer service team.
