دليل مستخدم سكوتر SOFLOW SO2 Zero الكهربائي

1. المقدمة

Welcome to the SOFLOW SO2 Zero Electric Scooter user manual. This document provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your new electric scooter. Please read this manual thoroughly before first use to ensure optimal performance and safety.

Figure 1.1: The SOFLOW SO2 Zero Electric Scooter, showcasinبفضل تصميمه الأنيق وبنيته المتينة.

2. معلومات السلامة

سلامتكم هي الأهم. التزموا دائمًا بالإرشادات التالية:

• احرص دائمًا على ارتداء خوذة ومعدات الحماية المناسبة (واقيات الركبة، واقيات المرفق) عند ركوب الدراجة.
• تعرف على القوانين واللوائح المحلية المتعلقة باستخدام السكوتر الكهربائي.
• لا تركب تحت تأثير الكحول أو المخدرات.
• Avoid riding in heavy rain, snow, or on slippery surfaces.
• حافظ على مسافة آمنة من المركبات الأخرى والمشاة.
• Regularly check the scooter for any loose parts, damage, or abnormal wear before each ride.
• The maximum weight capacity is 100 kg. Do not exceed this limit.
• This scooter is designed for one rider only. Do not carry passengers.

3. محتويات العبوة

تأكد من وجود جميع العناصر في العبوة:

• SOFLOW SO2 Zero Electric Scooter
• شاحن
• دليل المستخدم

4. الإعداد والتجميع

4.1 فتح السكوتر

The SO2 Zero comes pre-assembled in a folded state for compact transport.

1. ضع السكوتر على سطح مستو.
2. Locate the folding mechanism latch near the base of the handlebar stem.
3. Release the latch and carefully lift the handlebar stem until it locks into the upright position. Ensure the locking mechanism is fully engaged.

Figure 4.1: The SOFLOW SO2 Zero in its folded state, demonstrating the compact design for storage and transport.

4.2 الشحن الأولي

Before your first ride, fully charge the scooter's battery.

1. Locate the charging port, typically on the side of the footboard.
2. قم بتوصيل الشاحن بمنفذ الشحن الخاص بالسكوتر.
3. Plug the charger into a standard power outlet. The indicator light on the charger will change (e.g., red to green) when charging is complete.
4. Disconnect the charger once fully charged. Avoid overcharging.

5. تعليمات التشغيل

5.1 تشغيل/إيقاف التشغيل والشاشة

The scooter features a clear display for essential information.

• To power on, press and hold the power button on the handlebar. The display will illuminate.
• The display shows speed, battery level, and riding mode.
• لإيقاف التشغيل، اضغط مع الاستمرار على زر الطاقة مرة أخرى حتى يتم إيقاف تشغيل الشاشة.

Figure 5.1: The clear display on the handlebar provides real-time information such as speed and battery status.

5.2 ركوب السكوتر

Ensure you are in a safe, open area for your first ride.

1. Place one foot firmly on the wide footboard.
2. ادفع بقدمك الأخرى لاكتساب الزخم الأولي.
3. Gently press the accelerator lever/button on the handlebar to engage the motor.
4. Maintain balance and steer by leaning and turning the handlebars.

5.3 الكبح

The SO2 Zero is equipped with a reliable braking system.

• To slow down or stop, gently squeeze the brake lever on the handlebar.
• استخدم الفرامل بسلاسة لتجنب التوقف المفاجئ، خاصة عند السرعات العالية.
• The scooter features a maintenance-free braking system for consistent performance.

Figure 5.2: Detail of the rear wheel and the maintenance-free braking system, ensuring reliable stopping power.

5.4 NFC Unlock Feature

تقنية NFC المتكاملة tag allows for convenient unlocking.

• Ensure your smartphone has NFC enabled.
• Tap your smartphone near the NFC tag located on the scooter (refer to the scooter's specific NFC tag موقع).
• The scooter will unlock, allowing you to power it on and ride.

6. الصيانة

تضمن الصيانة المنتظمة طول عمر وتشغيل السكوتر الخاص بك بشكل آمن.

• تنظيف: امسح السكوتر بالإعلانamp cloth. Do not use high-pressure water or corrosive cleaners.
• ضغط الإطارات: The 8.5-inch air tires require proper inflation. Check tire pressure regularly and inflate to the recommended PSI (usually indicated on the tire sidewall or in specifications).

Figure 6.1: The front wheel with its 8.5-inch air tire, providing a smooth riding experience.

• نظام الفرامل: The SO2 Zero features a maintenance-free braking system. However, periodically inspect brake levers and cables for any signs of damage or excessive play.
• العناية بالبطارية: Store the scooter in a cool, dry place. If storing for extended periods, charge the battery to approximately 50-70% and recharge every 1-2 months to prevent deep discharge.
• التفتيش العام: Regularly check all screws, bolts, and connections for tightness. Ensure the folding mechanism operates smoothly and locks securely.

7. استكشاف الأخطاء وإصلاحها

يرجى الرجوع إلى الجدول أدناه للتعرف على المشكلات الشائعة وحلولها.

8. المواصفات

Detailed technical specifications for the SOFLOW SO2 Zero Electric Scooter:

9. الضمان والدعم

SOFLOW products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your purchase or visit the official SOFLOW website. For technical support, spare parts, or service inquiries, please contact SOFLOW customer service through their official channels.

معلومات الاتصال: Please refer to the SOFLOW official website or your purchase documentation for the most up-to-date contact details.