1. المقدمة
Thank you for choosing PAUTIX 5V USB COB LED Strip Lights. This manual provides essential information for the safe and efficient use of your LED strip lights. Please read these instructions carefully before installation and operation.
محتويات الحزمة:
- 1 x PAUTIX 5V USB COB LED Strip Light (6.56ft / 2m, 3000K Warm White)
- 1 x RF Wireless Remote Control
- 1 x USB Power Cable with In-line 3-button Dimmer

Image: Contents of the PAUTIX LED strip light package, showing the coiled strip, USB cable with in-line dimmer, and RF remote control.
2. معلومات السلامة
- مدرج في قائمة UL: This product is UL-Listed, ensuring compliance with safety standards.
- حجم منخفضtage: Operates on 5V DC, making it safe to touch for pets and children.
- للاستخدام الداخلي فقط: The LED strip has an IP30 rating and is designed exclusively for indoor environments. Avoid exposure to water or high humidity.
- مصدر الطاقة: Use only with a 5V/2A (or higher) USB power source. Insufficient power may cause flickering or improper operation.
- تثبيت: Ensure the mounting surface is clean, dry, and smooth for optimal adhesive performance.
- القطع: The strip can be cut at designated marks (every 12mm/0.47in). Cutting at non-marked points will damage the circuit.
- حرارة: While COB LEDs produce minimal heat, ensure proper ventilation when installed in enclosed spaces.
3. الإعداد والتثبيت
- تحضير السطح: Clean the desired mounting surface thoroughly to remove dust, oil, or moisture. A clean, dry, and smooth surface ensures strong adhesion.
- القياس والقطع (اختياري): If a shorter length is required, measure the desired length and cut the LED strip only at the designated cutting marks (indicated by copper pads).

Image: Diagram showing the cuttable sections of the LED strip, marked every 12mm/0.47in, with a pair of scissors indicating where to cut.
- تقشير الطبقة اللاصقة الخلفية: Carefully peel off the protective film from the 3M self-adhesive backing on the LED strip.
- قم بربط الشريط: Press the LED strip firmly onto the prepared surface, ensuring even contact along its entire length.

Image: Four-step visual guide demonstrating how to install the LED strip: clean the surface, peel the backing, paste the strip, and turn on the light.
- توصيل الطاقة: Plug the USB connector of the LED strip into a compatible 5V/2A (or higher) USB power source (e.g., TV USB port, computer, power bank, USB wall adapter).

Image: Various USB power sources compatible with the PAUTIX LED strip, including a USB charger, power bank, laptop/TV, 5V battery pack, and USB socket.
4. تعليمات التشغيل
RF Wireless Remote Control:
The included RF remote control allows for convenient operation from a distance, even without direct line of sight (360° control). It features:
- تشغيل/إيقاف: قم بتشغيل الأضواء أو إيقاف تشغيلها.
- ضبط السطوع: Increase or decrease brightness (5 levels).
- وظائف المؤقت: Set the lights to turn off automatically after 30 minutes, 1 hour, 2 hours, 3 hours, or 4 hours. Press 'C' to cancel the timer.
- وظيفة الذاكرة: The lights will restore to their last brightness setting when turned back on.

Image: The PAUTIX LED strip light coiled with the RF wireless remote control and USB power cable visible. The remote shows buttons for power, brightness, and timer settings.

Image: A child sleeping with the LED strip lights providing soft illumination, illustrating the timer function of the RF remote control.
In-line 3-button Dimmer:
The USB power cable includes an in-line controller with three buttons for basic operation:
- زر الطاقة: Turns the lights on/off.
- Brightness Up (+): يزيد السطوع.
- Brightness Down (-): يقلل السطوع.

Image: A living room scene with LED strip lights installed, showing the in-line dimmer and its buttons for adjusting brightness from 10% to 100%.
5. الصيانة
- تنظيف: Gently wipe the LED strip with a dry, soft cloth if it accumulates dust. Do not use liquid cleaners or immerse in water.
- مادة لاصقة: The 3M adhesive is strong. If repositioning is necessary, do so carefully to avoid damaging the strip or the surface.
- تخزين: عند عدم استخدام شريط LED لفترات طويلة، قم بتخزينه في مكان بارد وجاف، بعيدًا عن أشعة الشمس المباشرة.
6. استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الأضواء لا تعمل. | لا يوجد طاقة، اتصال فضفاض، منفذ USB معيب. |
|
| الأضواء تومض. | إمدادات الطاقة غير كافية. |
|
| جهاز التحكم عن بعد لا يعمل. | Battery issue, interference. |
|
| Sections of the strip are not lighting up. | Damage to the strip. |
|
7. المواصفات
- نموذج: RF-SWW320COB-USB-2M-3000K-NEW
- ماركة: باوتيكس
- نوع مصدر الضوء: مصباح LED COB
- درجة حرارة اللون: 3000 كيلو أبيض دافئ
- طول: 6.56 قدم (2 متر)
- LEDs per Meter: 320 LEDs/m (Total 640 LEDs)
- المجلدtage: 5 فولت (تيار مستمر)
- واتtage: 9.5 واط
- التدفق الضوئي: 1200 لومن
- مؤشر تجسيد اللون (CRI): >90
- المميزات الخاصة: 5V USB Powered, RF Remote Control, UL-Listed, Dimmable, Dotless, Flicker-Free, Memory Function, Timer
- عمر: >65,000 ساعة
- تصنيف حماية الدخول (IP): IP30 (الاستخدام الداخلي فقط)
- مادة: 3M Adhesive, COB LED Light Source, Double Layer Pure Copper PCB, Plastic
- طول كابل الطاقة: 2.6 قدم
- رمز المنتج العالمي: 717994811924
8. الضمان والدعم
PAUTIX is committed to customer satisfaction. This product comes with a ضمان لمدة 5 سنوات، وضمان الجودة والموثوقية.
If you encounter any issues or have questions regarding your PAUTIX LED Strip Lights, please contact our customer support team. We aim to respond within 24 hours and provide a prompt resolution.
معلومات الاتصال: Please refer to the product packaging or the official PAUTIX webللحصول على أحدث تفاصيل الاتصال بخدمة العملاء، يرجى زيارة الموقع.




