مقدمة
The ZEBRONICS Argo Cube Form Factor Gaming Cabinet is designed to house your computer components, offering a compact and visually appealing solution for gaming setups. It features a cube form factor with tempered glass panels, pre-installed ARGB fans, and support for various cooling and connectivity options. This manual provides essential information for the proper setup, operation, and maintenance of your gaming cabinet.
Figure 1: ZEBRONICS Argo Cube Gaming Cabinet, showcasing its cube form factor and illuminated ARGB fans.
الإعداد والتثبيت
Follow these steps for the correct installation of your components within the ZEB-Argo cabinet.
1. تركيب اللوحة الأم
The ZEB-Argo cabinet supports Micro ATX and ITX motherboards. Carefully align your motherboard with the standoffs inside the chassis and secure it with screws.
Figure 2: Diagram illustrating motherboard compatibility (Micro ATX, ITX) and ARGB fan sync support.
2. Cooling System Setup
The cabinet comes with three pre-installed 120mm inner glow ARGB LED cooling fans: one on the rear and two on the side. Additional 120mm cooling fans can be added at the top (2x) and bottom (2x) for enhanced airflow.
- مراوح مثبتة مسبقًا: 1x 120mm ARGB fan (Rear), 2x 120mm ARGB fans (Side panels).
- AIO Cooler Support: The chassis supports AIO coolers, with a 120mm option on the rear and a 240mm option on the top.
الشكل 3: انتهىview of pre-installed fans and locations for additional AIO cooler mounting.
Figure 4: Diagram detailing AIO cooler support locations (120mm rear, 240mm top).
3. Component Dimensions and Clearance
- VGA Card: Supports cards up to 330mm in length.
- مبرد وحدة المعالجة المركزية: Accommodates coolers up to 160mm in height.
- مزود الطاقة: The power supply unit (PSU) is installed at the bottom of the chassis.
Figure 5: Visual guide to maximum supported dimensions for VGA cards, CPU coolers, and fan/AIO placements.
4. تثبيت محرك التخزين
The ZEB-Argo cabinet provides mounting points for storage drives:
- 1x HDD (Hard Disk Drive) mounting point.
- 3x SSD (Solid State Drive) mounting points.
الشكل 6: داخلي view showing designated areas for 1x HDD and 3x SSD installations.
5. Front Panel Connectivity
The front panel offers convenient access to various ports and controls:
- 1 × منفذ USB 3.0
- 1x USB Port (Standard)
- 1x Type-C Port
- 1x 3.5mm Microphone Port
- 1x 3.5mm Headphone Port
- LED Control Switch (for ARGB fan modes)
- زر الطاقة
The chassis also includes 7 expansion slots at the back panel for add-on cards.
الشكل 7: الصورة عن قرب view of the front panel, highlighting the Type-C, USB 3.0, standard USB, headphone/mic jacks, LED switch, and power button.
6. إدارة الكابلات
The ZEB-Argo chassis is designed with cable management features to help organize cluttered cables, ensuring optimal airflow and a clean internal appearance. Utilize the provided routing channels and tie-down points behind the motherboard tray.
تعليمات التشغيل
بمجرد تثبيت كافة المكونات وتوصيلها، يمكنك تشغيل نظامك.
- تشغيل الطاقة: Press the power button located on the front panel to start your computer.
- التحكم في الصمام: Use the dedicated LED control switch on the front panel to cycle through various ARGB lighting modes for the pre-installed fans.
- Motherboard ARGB Sync: If your motherboard supports ARGB synchronization, you can connect the cabinet's ARGB lighting to your motherboard's header for unified lighting control via motherboard software. Refer to your motherboard manual for specific instructions.
صيانة
Regular maintenance helps ensure optimal performance and longevity of your gaming cabinet.
- فلاتر الغبار: The top of the chassis is fitted with magnetic dust filters. Regularly remove and clean these filters to prevent dust accumulation inside the cabinet, which can impede airflow and component cooling.
- النظافة العامة: Use a soft, dry cloth to wipe down the exterior surfaces, including the tempered glass panels. For stubborn smudges on glass, a mild glass cleaner can be used sparingly on the cloth, not directly on the panel.
- إزالة الغبار الداخلي: Periodically use compressed air to clear dust from internal components and fan blades. Ensure the system is powered off and unplugged before performing internal cleaning.
استكشاف الأخطاء وإصلاحها
يتناول هذا القسم المشكلات الشائعة التي قد تواجهها.
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| Fans not lighting up or dim ARGB | Loose ARGB connections; incorrect fan daisy-chaining; faulty fan. |
|
| Front panel USB/audio ports not working | Internal cables not connected to motherboard; incorrect driver. |
|
| ارتفاع درجة حرارة النظام | Poor airflow; dust accumulation; insufficient cooling. |
|
تحديد
| ميزة | التفاصيل |
|---|---|
| ماركة | الزبرونيك |
| اسم الموديل | ZEB - ARGO (BLACK) |
| عامل الشكل | مكعب |
| التوافق مع اللوحة الأم | Micro ATX, ITX |
| مادة | Tempered Glass (Front & Side Panel) |
| مراوح مثبتة مسبقًا | 3 x 120mm ARGB LED (1 Rear, 2 Side) |
| دعم إضافي للجماهير | 2 x 120mm (Top), 2 x 120mm (Bottom) |
| دعم نظام التبريد المتكامل (AIO) | 120mm (Rear), 240mm (Top) |
| الحد الأقصى لطول بطاقة VGA | 330 ملم |
| أقصى ارتفاع لمبرد وحدة المعالجة المركزية | 160 ملم |
| تركيب وحدة إمداد الطاقة | قاع |
| فتحات التوسعة | 7 |
| منافذ الإدخال / الإخراج الأمامية | 1x USB 3.0, 1x USB, 1x Type-C, 1x 3.5mm Mic, 1x 3.5mm Headphone |
| الأبعاد (الطول × العرض × الارتفاع) | 29 × 45 × 54.4 سم |
| وزن العنصر | 4.3 كجم |
| فلتر الغبار | Magnetic (Top) |
الضمان والدعم
للحصول على معلومات الضمان ودعم العملاء، يرجى الرجوع إلى موقع ZEBRONICS الرسمي. website or contact their customer service directly. The product comes with a standard warranty as per regional regulations. Keep your purchase receipt for warranty claims.
- الشركة المصنعة: شركة زيبرونيكس إنديا الخاصة المحدودة
- عنوان الشركة المصنعة: 13/7, Smith Road, Royapettah CHENNAI-600002
- سياسة الضمان: ارجع إلى صفحة المنتج or official ZEBRONICS channels for detailed warranty terms.
