1. المقدمة
This manual provides detailed instructions for the installation, operation, and maintenance of the LevelOne FCS-5202 Gemini 4 MP Fixed IP Camera. The FCS-5202 is an outdoor fixed camera designed for reliable and cost-effective IP surveillance networks. It is built to withstand various environmental conditions, including rain, extreme heat, snow, dust, and humidity. This camera delivers clear 4-megapixel resolution images and supports 802.3af Power over Ethernet (PoE) for combined power and data transmission over a single Cat.5 cable.
2. انتهى المنتجview
2.1 الميزات الرئيسية
- 4 Megapixel High-Definition Resolution for clear and sharp images.
- Supports H.264, H.265, and MJPEG video compression for efficient storage and streaming.
- Integrated 802.3af Power over Ethernet (PoE) for simplified installation with a single cable.
- IP67 Weather-Resistant Casing ensures durability in outdoor environments.
- Advanced Motion Detection capabilities, including intrusion, camera tampering, and line crossing detection.
- Event notification support for immediate alerts.
2.2 محتويات العبوة
- LevelOne FCS-5202 IP Camera
- دليل التثبيت (راجع هذا الدليل)
- ملحقات التركيب
2.3 مخطط الكاميرا
الشكل 1: الأمامي والجانبي view of the LevelOne FCS-5202 Gemini 4 MP Fixed IP Camera, showing the lens, IR LEDs, and mounting bracket.
3. الإعداد والتثبيت
3.1 احتياطات السلامة
- تأكد من فصل الطاقة قبل التثبيت أو الصيانة.
- Install the camera in a location that provides optimal viewing and is protected from direct impact.
- Use appropriate tools and follow local electrical codes.
3.2 التثبيت المادي
- اختر موقع التركيب: Select a suitable outdoor location, preferably under an overhang, that offers a clear field of view and is within reach of a network cable with PoE.
- جبل قوس: Use the provided mounting accessories to securely attach the wall mount bracket to the chosen surface. Mark and drill pilot holes as necessary.
- قم بتوصيل الكاميرا: Secure the camera to the mounting bracket. Adjust the camera's angle and orientation for the desired coverage.
3.3 اتصال الشبكة والطاقة
- توصيل كابل إيثرنت: Connect a Cat.5 or higher Ethernet cable from your PoE-enabled switch or PoE injector to the camera's Ethernet port. This single cable will provide both power and data.
- تشغيل الطاقة: Once the Ethernet cable is connected to a PoE source, the camera will power on automatically. Allow a few minutes for the camera to boot up.
3.4 التكوين الأولي
- اكتشف الكاميرا: Use the LevelOne IP Camera Finder tool (available on the LevelOne website) or a network scanner to locate the camera's IP address on your network.
- وصول Web الواجهة: افتح web browser and enter the camera's IP address. You will be prompted to enter a username and password. Refer to the default credentials provided in the camera's packaging or on the manufacturer's webموقع.
- تغيير بيانات الاعتماد الافتراضية: For security purposes, immediately change the default username and password to strong, unique credentials.
- إعدادات الشبكة: Configure network settings such as static IP address (recommended for surveillance devices), subnet mask, gateway, and DNS servers as per your network requirements.
- التاريخ والوقت: Set the correct date and time, preferably by synchronizing with an NTP server.
4. تعليمات التشغيل
4.1 مباشر View
بعد تسجيل الدخول إلى الكاميرا web الواجهة، انتقل إلى "البث المباشر" View" section to see the real-time video feed from the camera. You can typically adjust stream quality and view options here.
4.2 تسجيل الفيديو
- التسجيل المستمر: Configure the camera to record video continuously to a Network Video Recorder (NVR) or network-attached storage (NAS).
- Event-Triggered Recording: Set up recording to activate only when specific events occur, such as motion detection.
- التسجيل المجدول: Define specific time periods for recording.
4.3 Motion Detection and Event Management
- تكوين مناطق الكشف: In the camera's settings, define specific areas within the camera's view حيث يجب تفعيل خاصية كشف الحركة.
- إعدادات الحساسية: Adjust the sensitivity of motion detection to minimize false alarms.
- إجراءات الحدث: Specify actions to be taken when an event is detected, such as:
- Sending email notifications.
- Uploading recorded video clips to an FTP server.
- Triggering an alarm output (if available).
4.4 الوصول عن بعد
To access your camera remotely, you may need to configure port forwarding on your router or use a cloud-based service provided by LevelOne or a third-party NVR. Consult your router's manual or network administrator for port forwarding instructions.
5. الصيانة
5.1 تنظيف الكاميرا
- نظف عدسة الكاميرا وهيكلها بانتظام بقطعة قماش ناعمة.amp قطعة قماش لإزالة الغبار والأوساخ وبقع الماء.
- Do not use harsh chemicals or abrasive cleaners, as these can damage the lens or casing.
- تأكد من إيقاف تشغيل الكاميرا قبل التنظيف.
5.2 تحديثات البرامج الثابتة
Periodically check the LevelOne official website for firmware updates. Firmware updates can provide new features, improve performance, and enhance security. Follow the instructions provided with the firmware update package carefully.
6. استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الكاميرا لا تعمل. | No power from PoE switch/injector; faulty Ethernet cable. | Verify PoE source is active. Check Ethernet cable connection and integrity. Try a different PoE port or cable. |
| لا يمكن الوصول إلى الكاميرا عبر web المتصفح. | عنوان IP غير صحيح؛ مشكلة في اتصال الشبكة؛ جدار الحماية يمنع الوصول. | Confirm camera's IP address using discovery tool. Check network cable. Disable local firewall temporarily or add exception. Ensure camera and computer are on the same network segment. |
| جودة الصورة رديئة. | Dirty lens; improper focus (if adjustable); low light conditions; network bandwidth issues. | Clean the lens. Check camera settings for resolution and quality. Ensure adequate lighting. Verify network bandwidth is sufficient for video streaming. |
| كشف الحركة لا يعمل أو الكثير من الإنذارات الخاطئة. | Incorrect sensitivity settings; detection zones not configured properly; environmental factors (e.g., moving branches). | Adjust motion detection sensitivity. Refine detection zones to exclude irrelevant areas. Consider environmental factors. |
7. المواصفات
| ميزة | التفاصيل |
|---|---|
| رقم الموديل | فس-5202 |
| دقة | 4 ميجا بكسل |
| ضغط الفيديو | H.264 ، H.265 ، MJPEG |
| الاتصال | Wired (802.3af Power over Ethernet - PoE) |
| مصدر الطاقة | 802.3af PoE or 12V DC (Power adapter not included) |
| استهلاك الطاقة | 5.76 واط |
| مادة | معدن |
| بيئة الاستخدام | في الهواء الطلق |
| مقاومة الطقس | تصنيف IP67 |
| الأبعاد (الطول × العرض × الارتفاع) | 6.05 x 15.4 x 7 cm (2.38 x 6.06 x 2.76 inches) |
| وزن | 640 جرام (1.41 رطل) |
| نوع التركيب | حامل التثبيت على الحائط |
| الاستخدام الموصى به | Motion detection, Outdoor surveillance |
8. الضمان والدعم
For warranty information, please refer to the documentation provided with your purchase or contact your reseller. LevelOne provides technical support for its products. For assistance, please visit the official LevelOne webالموقع أو الاتصال بقسم خدمة العملاء.
الموارد المتاحة على الإنترنت:
- LevelOne Official Webموقع: www.level1.com
- صفحة دعم المنتج: بحث عن FCS-5202 on the LevelOne website for drivers, firmware, and FAQs.
