DreamSky Outdoor Sensor Instruction Manual

1. انتهى المنتجview

The DreamSky Wireless Outdoor Sensor is designed to measure outdoor temperature and humidity. It features sensitive vents for accurate readings and is specifically compatible with DreamSky Weather Station Models DS23W1 and DS24BW02. This sensor transmits data wirelessly to the main weather station unit.

الشكل 1: أمام view of the DreamSky Wireless Outdoor Sensor, showing the vents and indicator light.

2. محتويات العبوة

• 1 x DreamSky Wireless Outdoor Sensor
• Note: 2 x AAA batteries are required and not included.

3. الإعداد

3.1 تركيب البطارية

The outdoor sensor requires two AAA batteries for operation. Ensure correct polarity when inserting the batteries.

1. حدد موقع غطاء حجرة البطارية في الجزء الخلفي من المستشعر.
2. حرك الغطاء لفتحه.
3. Insert 2 AAA batteries according to the polarity markings (+ and -).
4. أغلق غطاء حجرة البطارية جيدًا.
5. The sensor's indicator light will flash once batteries are installed, indicating it is powered on and attempting to transmit.

3.2 اختيار القناة

If you are using multiple outdoor sensors with your DreamSky Weather Station, each sensor must be set to a unique channel (1, 2, or 3) to avoid interference. The channel selection switch is located inside the battery compartment.

1. افتح غطاء حجرة البطارية.
2. Locate the small switch labeled "CH" or "Channel".
3. Set the switch to your desired channel (e.g., 1, 2, or 3).
4. أغلق غطاء حجرة البطارية.
5. Ensure your main weather station unit is also set to receive data from the corresponding channel. Refer to your weather station's manual for instructions on setting its receiving channel.

3.3 Synchronization with Weather Station

After installing batteries and selecting a channel, the sensor will automatically attempt to synchronize with your compatible DreamSky Weather Station (Models DS23W1 or DS24BW02).

1. Place the outdoor sensor and the main weather station unit close to each other (within a few feet) during the initial synchronization process.
2. تأكد من أن كلا الجهازين بهما بطاريات جديدة.
3. Power on the main weather station unit. It will typically begin searching for outdoor sensors automatically.
4. The outdoor temperature and humidity readings should appear on the weather station display within a few minutes. If not, refer to the Troubleshooting section or your weather station's manual for manual synchronization steps.

الشكل 2: The DreamSky Outdoor Sensor shown alongside the compatible DS24BW02 Weather Station, illustrating their intended pairing.

الشكل 3: The DreamSky Outdoor Sensor positioned with the compatible DS23W1 Weather Station (grey model), demonstrating the sensor's integration.

4. التركيب والوضع

4.1 اعتبارات التنسيب

• الموقع الأمثل: Choose a shaded area that is protected from direct sunlight and precipitation to ensure accurate temperature and humidity readings. Direct sunlight can cause artificially high temperature readings.
• تهوية: Ensure the sensor's vents are not obstructed.
• مسافة: Place the sensor within the wireless range of your main weather station unit. Obstacles like thick walls, metal structures, or electronic devices can reduce the transmission range.
• ارتفاع: Mount the sensor approximately 5-6 feet (1.5-1.8 meters) above the ground for standard readings.

4.2 خطوات التثبيت

The sensor is designed for wall mounting.

1. Select a suitable mounting location based on the considerations above.
2. Use a pencil to mark the desired screw position through the mounting hole at the top of the sensor.
3. Drill a small pilot hole if necessary.
4. Insert a screw (not included) into the wall, leaving a small portion protruding.
5. Hang the sensor onto the screw using the mounting hole. Ensure it is securely fastened.

5. التشغيل

Once successfully synchronized, the outdoor sensor continuously measures temperature and humidity and transmits this data to your DreamSky Weather Station. The weather station will display these readings on its screen.

• The sensor's indicator light will flash periodically (e.g., every 60 seconds) to confirm data transmission.
• Refer to your specific DreamSky Weather Station manual (DS23W1 or DS24BW02) for details on how to view, interpret, and utilize the outdoor sensor data on the main display.

الشكل 4: A DreamSky DS23W1 Weather Station with a color display, illustrating how outdoor temperature and humidity data from the sensor are presented.

6. الصيانة

• استبدال البطارية: Replace batteries when the low battery indicator appears on your main weather station unit for the outdoor sensor, or if the sensor stops transmitting data. Always replace both batteries with fresh AAA batteries.
• تنظيف: امسح السطح الخارجي للمستشعر بقطعة قماش ناعمة و...amp cloth. Do not use abrasive cleaners or allow water to enter the vents.
• تهوية: Periodically check that the sensor's vents are clear of debris (e.g., leaves, spiderwebs) to ensure accurate readings.

7. استكشاف الأخطاء وإصلاحها

8. المواصفات

9. الضمان والدعم

For warranty information or technical support, please contact DreamSky customer service. Details can typically be found on the DreamSky official webالموقع أو من خلال بائع التجزئة الذي تم شراء المنتج منه.

When contacting support, please have your product model number (DS23W1 or DS24BW02 for the compatible weather station, or 23W for the sensor) and purchase information readily available.