U-Turn Audio Orbit Plus (Gen 2) Turntable Instruction Manual

مقدمة

The U-Turn Audio Orbit Plus (Gen 2) Turntable is designed to provide high-fidelity audio playback for your vinyl collection. Featuring an OA3 precision gimbal tonearm, a grooved acrylic platter, and an external belt drive, this turntable delivers accurate tracking, consistent speed, and detailed sound. This manual provides essential information for setting up, operating, and maintaining your turntable.

Figure 1: U-Turn Audio Orbit Plus (Gen 2) Turntable, Black No Preamp.

محتويات الحزمة

قبل أن تبدأ، تأكد من تواجد جميع المكونات:

• Orbit Plus Turntable
• محول التيار المتردد
• كابلات RCA
• غطاء الغبار
• فيلت حصيرة

دليل الإعداد

Follow these steps to set up your Orbit Plus turntable:

1. الموقع: ضع القرص الدوار على سطح مستوٍ وثابت بعيدًا عن أشعة الشمس المباشرة ومصادر الحرارة والاهتزازات.
2. تركيب الطبق: Carefully place the grooved acrylic platter onto the spindle.
3. تركيب الحزام: The external belt drive uses a seamless silicone belt. Gently stretch the belt around the motor pulley and the outer rim of the platter. Ensure it is seated correctly.
4. Tonearm Setup:
   • The OA3 precision gimbal tonearm features a one-piece magnesium armtube.
   • Install the Ortofon OM5E cartridge onto the tonearm if not pre-installed.
   • Adjust the counterweight at the rear of the tonearm to achieve the recommended tracking force for your cartridge. Refer to the cartridge manufacturer's specifications for precise settings.
   • The tonearm includes internal anti-skate, which is pre-calibrated for optimal performance.
   

   Figure 2: OA3 Precision Gimbal Tonearm with Ortofon OM5E Cartridge.

5. الاتصال بالنظام الصوتي:

   This turntable requires an external turntable preamp أو amplifier with dedicated phono inputs. Connect the RCA cables from the turntable's output to the appropriate input on your preamp or amplifier. Connect the ground wire to the ground terminal on your audio equipment to minimize hum.

6. توصيل الطاقة: قم بتوصيل محول التيار المتردد بجهاز تشغيل الأسطوانات ثم بمأخذ الطاقة.
7. غطاء الغبار: Place the dust cover over the turntable to protect it when not in use.

Figure 3: U-Turn Audio turntables are Hand Assembled in the USA.

تعليمات التشغيل

Operating your Orbit Plus turntable is straightforward:

1. تشغيل/إيقاف التشغيل: Use the power switch located on the front left of the turntable to turn the unit on or off.
   

   Figure 4: Power switch and U-Turn logo.
2. Selecting Playback Speed: The Orbit Plus features manual speed control. To change between 33 ⅕ RPM and 45 RPM, you must manually move the silicone belt between the two grooves on the motor pulley.
   

   Figure 5: Grooved acrylic platter and external belt drive for speed selection.

3. تشغيل السجل:
   • Place your vinyl record onto the platter.
   • Carefully lift the tonearm using the tonearm lift lever (if present, or manually if not).
   • Position the stylus over the lead-in groove of the record.
   • Gently lower the tonearm onto the record. The music will begin to play.
4. إيقاف التشغيل:
   • Lift the tonearm from the record.
   • أعد ذراع التسجيل إلى مكانه.
   • Turn off the turntable using the power switch.

Figure 6: Ready to Play Out of the Box.

صيانة

Proper maintenance ensures the longevity and optimal performance of your turntable:

• غطاء الغبار: Always keep the dust cover closed when the turntable is not in use to prevent dust accumulation on the platter and stylus.
• تنظيف:
  • Use a soft, dry, lint-free cloth to clean the turntable's chassis and dust cover.
  • For the acrylic platter, use a specialized acrylic cleaner and a soft cloth to avoid scratches.
  • Regularly clean your records with a record brush to remove dust and static before playback.
  • Use a dedicated stylus brush to gently clean the stylus, brushing from back to front.
• العناية بالحزام: Inspect the silicone belt periodically for any signs of wear or stretching. Replace if necessary to maintain accurate speed.

استكشاف الأخطاء وإصلاحها

If you encounter issues with your turntable, refer to the following common solutions:

تحديد

الضمان والدعم

For warranty information and customer support, please refer to the official U-Turn Audio website or contact their customer service directly. Extended protection plans may be available for purchase to provide additional coverage beyond the standard manufacturer's warranty.

• خطط الحماية: Options such as 2-Year and 3-Year Protection Plans are available.
• الدعم عبر الإنترنت: قم بزيارة U-Turn Audio Store on Amazon لمزيد من المعلومات والموارد.