دليل تعليمات عجلات القيادة الخلفية من تورو 98-7135 (عبوة من قطعتين)

1. المقدمة

This manual provides comprehensive instructions for the proper installation, operation, and maintenance of your new Toro 98-7135 Rear Drive Wheels. These wheels are designed as direct replacements for specific Toro lawn mower models, ensuring optimal performance and traction. Please read this manual thoroughly before attempting any installation or maintenance procedures.

2. معلومات السلامة

Always prioritize safety when working with machinery. Failure to follow these safety guidelines may result in personal injury or damage to equipment.

• فصل الطاقة: Before performing any installation, maintenance, or inspection, ensure the lawn mower's engine is off and the spark plug wire is disconnected to prevent accidental starting.
• ارتداء معدات الحماية: Always wear appropriate personal protective equipment, including safety glasses and gloves, to protect against potential hazards.
• استخدم الأدوات الصحيحة: Utilize the correct tools for each task to avoid stripping fasteners or causing damage.
• تأمين جزازة العشب: If lifting the mower, ensure it is securely supported on a stable surface to prevent it from falling.
• اقرأ دليل جزازة العشب: Refer to your lawn mower's original owner's manual for specific safety instructions and procedures related to your model.

3. محتويات العبوة

تأكد من أن جميع العناصر موجودة وغير تالفة عند فتح العبوة:

• 2 x Toro 98-7135 Rear Drive Wheels

في حال وجود أي مكونات مفقودة أو تالفة، يرجى الاتصال بالمورد على الفور.

4. المواصفات

Key specifications for the Toro 98-7135 Rear Drive Wheels:

5. الإعداد والتثبيت

Follow these steps to replace the rear drive wheels on your Toro lawn mower. Refer to your mower's specific service manual for detailed instructions if available.

1. تحضير جزازة العشب:
   • تأكد من أن المحرك متوقف وبارد.
   • افصل سلك شمعة الإشعال لمنع بدء التشغيل العرضي.
   • Place the mower on a flat, stable surface. If tilting the mower, ensure the carburetor side is up to prevent fuel leakage.
2. إزالة العجلة القديمة:
   • Locate the retaining bolt or nut securing the wheel to the axle. This is typically found in the center of the wheel.
   • Using an appropriate wrench or socket, loosen and remove the bolt/nut.
   • Carefully pull the old wheel off the axle. Note the position of any washers or spacers for reinstallation.
3. Inspect Axle and Components:
   • Clean any debris from the axle and surrounding area.
   • Inspect the axle for damage or excessive wear.
   • Ensure any existing spacers or washers are clean and in good condition.
4. تثبيت العجلة الجديدة:
   • Align the new Toro 98-7135 wheel with the axle. Ensure the gear side of the wheel faces inward towards the mower deck.
   • Slide the wheel onto the axle, making sure any spacers or washers are correctly positioned.
   • Reinstall the retaining bolt or nut. Tighten it securely, but do not overtighten, as this can damage the wheel or axle.
5. Repeat for Second Wheel: Follow the same steps for the other rear drive wheel.
6. التحقق النهائي:
   • Ensure both new wheels are securely attached and spin freely.
   • أعد توصيل سلك شمعة الإشعال.
   • Test the mower's drive system in a safe, open area.

الصورة 1: الجبهة view of the Toro 98-7135 Rear Drive Wheels, showing the tread pattern and hub design.

الصورة 2: خلفي view of the Toro 98-7135 Rear Drive Wheels, highlighting the integrated metal gear with 42 teeth.

6. اعتبارات التشغيل

While wheels do not have operational controls, proper usage of your lawn mower contributes to their longevity:

• Even Terrain: Operate the mower on relatively even terrain to minimize stress on the wheels and drive system.
• تجنب العوائق: Steer clear of large rocks, roots, or other obstacles that could damage the wheels or tires.
• التخزين السليم: Store the mower in a dry, protected area to prevent environmental damage to the rubber and metal components.

7. الصيانة

Regular maintenance helps extend the life of your rear drive wheels and ensures consistent performance.

• التفتيش الدوري: Periodically inspect the wheels for signs of wear, cracks in the rubber, or damage to the gear teeth. Check for any looseness in the wheel attachment.
• تنظيف: After each use, remove grass clippings, dirt, and debris from around the wheels and axle area. This prevents buildup that can impede movement or cause premature wear.
• تشحيم: Consult your lawn mower's manual for specific lubrication requirements for the axle and wheel bearings. If applicable, apply a small amount of appropriate grease to ensure smooth operation.
• مداس الإطار: Monitor the tire tread. Worn tread can reduce traction, especially on inclines or wet grass. Replace wheels if the tread is significantly worn.

8. استكشاف الأخطاء وإصلاحها

Address common issues with your rear drive wheels using the following guide:

9. فيديو المنتج

شاهد هذا الفيديو للحصول على عرض مرئيview of the Toro 98-7135 Rear Drive Wheels, including features and specifications.

10. الضمان والدعم

For warranty information, please refer to the documentation provided by the seller or manufacturer at the time of purchase. If you require technical assistance or have questions regarding the installation or performance of your Toro 98-7135 Rear Drive Wheels, please contact the product seller or Toro customer support directly.

Always provide your product model number (98-7135) and any relevant purchase details when seeking support.