1. المقدمة
This manual provides detailed instructions for the proper use, setup, and maintenance of the Hantek 6254BE Digital Automotive PC Oscilloscope. This device is designed for automotive diagnostics and general electronic measurements, offering high performance and versatility when connected to a personal computer.
2. معلومات السلامة
Please read and understand all safety instructions before operating the device to prevent injury or damage. Keep this manual for future reference.
- Always connect the oscilloscope to a computer via the provided USB cable.
- Ensure all connections are secure before applying power or making measurements.
- لا تعرض الجهاز للرطوبة أو درجات الحرارة العالية أو أشعة الشمس المباشرة.
- Avoid using the device in environments with strong electromagnetic interference.
- Only use accessories and probes supplied or approved by Hantek.
- ارجع الخدمة إلى الموظفين المؤهلين فقط.
3. محتويات العبوة
Verify that all items listed below are present in your package. If any items are missing or damaged, contact your vendor immediately.
الشكل 3.1: Hantek 6254BE Digital Oscilloscope and included accessories. This image displays the main oscilloscope unit, various test leads, probes, USB cable, and a software CD.
- Hantek 6254BE Digital Oscilloscope Unit
- كابل يو اس بي
- Test Probes (Quantity and type may vary by package)
- Alligator Clip Leads
- قرص البرنامج (أو رابط التنزيل)
- دليل المستخدم (هذا المستند)
4. انتهى المنتجview
The Hantek 6254BE is a 4-channel PC-based digital oscilloscope designed for a wide range of applications, particularly in automotive diagnostics. It features a 250MHz bandwidth, 1GSa/s real-time sampling rate, and high input sensitivity.
4.1. الميزات الرئيسية
- القنوات: 4
- النطاق الترددي: 250 ميجا هرتز
- في الوقت الحقيقي سampمعدل لينغ: 1 جيغاسا/ثانية
- حساسية الإدخال: 2mV-10V/DIV
- القياسات التلقائية: Over 20 types, including PASS/FAIL check.
- الاتصال: USB 2.0 (Plug and Play)
- توافق النظام: Supports Windows 7, 8, 10, 11.
4.2. تخطيط الجهاز
الشكل 4.1: اللوحة الأمامية والخلفية views of the Hantek 6254BE. The front panel shows the four BNC input channels (CH1, CH2, CH3, CH4). The rear panel includes the USB connection port and a 5V power input, though the USB XITM interface is noted as non-functional.
- CH1-CH4 BNC Inputs: Connect test probes and leads here.
- منفذ USB: Connects to your PC for data transfer and power.
- مدخل الطاقة 5 فولت: Optional external power supply connection (if required by specific applications or PC USB power limitations).
- الفتحات: Located on the sides and bottom for heat dissipation, ensuring stable performance.
الشكل 4.2: Dimensions of the Hantek 6254BE (175mm x 105mm x 25mm) and an illustration of its ventilation system. The vents are crucial for maintaining optimal operating temperature and device longevity.
5. تعليمات الإعداد
Follow these steps to set up your Hantek 6254BE oscilloscope.
5.1. متطلبات النظام
- Operating System: Windows 7, Windows 8, Windows 10, or Windows 11.
- منفذ USB 2.0 أو أعلى.
- Sufficient free disk space for software installation.
5.2. تثبيت البرنامج
- Insert the provided software CD into your computer's CD-ROM drive. If no CD drive is available, download the latest software and drivers from the official Hantek webموقع.
- Run the installer executable (e.g., "setup.exe") and follow the on-screen prompts.
- During installation, ensure that all necessary drivers for the Hantek 6254BE are selected and installed.
- Restart your computer if prompted after installation is complete.
5.3. Connecting the Oscilloscope
- Connect one end of the USB cable to the USB port on the rear panel of the Hantek 6254BE.
- قم بتوصيل الطرف الآخر من كابل USB بمنفذ USB 2.0 متاح على جهاز الكمبيوتر الخاص بك.
- The operating system should automatically detect the device and install any remaining drivers.
- Launch the Hantek oscilloscope software from your desktop or Start Menu.
الشكل 5.1: The Hantek 6254BE connected to a tablet PC, demonstrating its compatibility with various Windows-based devices. Multiple units can be connected to a single computer for expanded channel capabilities.
الشكل 5.2: The Hantek 6254BE connected to a laptop, displaying the oscilloscope software interface. This setup illustrates the typical operating environment for the device.
6. تعليمات التشغيل
This section outlines the basic operation of the Hantek 6254BE using the PC software.
6.1. Software Interface Overview
Upon launching the software, you will see the main waveform display area, control panels for each channel, trigger settings, time base controls, and measurement functions. Familiarize yourself with the layout.
6.2. Connecting Probes and Making Measurements
- Select the appropriate probe for your measurement. For general purpose, use the provided passive probes. For automotive applications, specialized probes (e.g., ignition probes, current clamps) may be required.
- Connect the probe to one of the BNC input channels (CH1-CH4) on the oscilloscope.
- Attach the probe tip to the test point and the ground clip to a suitable ground reference in the circuit under test.
- In the software, enable the corresponding channel and adjust the vertical scale (Volts/Div) and horizontal scale (Time/Div) to view the waveform clearly.
- Adjust trigger settings (Type, Source, Level) to stabilize the waveform.
6.3. Automotive Measurement Functions
The Hantek 6254BE is equipped with extensive automotive diagnostic capabilities, including over 80 types of pre-configured measurements.
الشكل 6.1: The Hantek 6254BE in use for automotive diagnostics, connected to an engine. The software displays various waveforms, indicating its capability for ignition analysis, sensor testing, and bus diagnosis.
- Ignition Action: Analyze ignition patterns.
- Sensor Diagnosis: Test various automotive sensors (e.g., O2, MAP, Crankshaft Position).
- Bus Diagnosis: Monitor CAN bus, LIN bus, etc.
- Charging Circuits: Evaluate battery and alternator performance.
- Starter Circuits: Diagnose starter motor issues.
Access these functions through the dedicated automotive menu within the software. Each function typically provides guided setup and analysis tools.
6.4. Automatic Measurement and Analysis
The software offers more than 20 types of automatic measurements (e.g., Vpp, Vmax, Vmin, Freq, Period, Rise Time, Fall Time). These can be displayed directly on the screen for quick analysis.
- PASS/FAIL Check: Configure limits for specific waveform parameters. The system will automatically indicate if a waveform passes or fails these criteria.
- Dynamic Cursor Tracking: Use cursors to precisely measure voltage and time differences on the waveform.
- Waveform Record and Replay: Capture and save long waveform sequences for later review والتحليل.
7. الصيانة
Proper maintenance ensures the longevity and accuracy of your Hantek 6254BE oscilloscope.
- تنظيف: استخدم قطعة قماش ناعمة وجافة لتنظيف الجهاز. لا تستخدم منظفات أو مذيبات كاشطة.
- تخزين: Store the oscilloscope in a cool, dry place, away from direct sunlight and extreme temperatures.
- العناية بالمسبار: Handle probes carefully. Avoid bending or stressing the cables. Calibrate probes regularly if the software provides this option.
- تحديثات البرامج: Periodically check the Hantek website for software and driver updates to ensure optimal performance and access to new features.
8. استكشاف الأخطاء وإصلاحها
This section addresses common issues you might encounter with your Hantek 6254BE.
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| لم يتم التعرف على الجهاز بواسطة الكمبيوتر. |
|
|
| No waveform displayed. |
|
|
| Unstable or noisy waveform. |
|
|
9. المواصفات
Detailed technical specifications for the Hantek 6254BE Digital Automotive PC Oscilloscope.
| المعلمة | قيمة |
|---|---|
| نموذج | 6254BE |
| القنوات | 4 |
| النطاق الترددي | 250 ميجا هرتز |
| في الوقت الحقيقي سampمعدل لينغ | 1 جيجاسا/ثانية |
| حساسية الإدخال | 2mV/DIV - 10V/DIV |
| الدقة الرأسية | 8 بت |
| اقتران المدخلات | تيار مستمر، تيار متردد، أرضي |
| معاوقة الإدخال | 1MΩ 25pF |
| الحد الأقصى لحجم الإدخالtage | 40V (Probe X1) |
| نطاق قاعدة الوقت | 2ns/div - 1000s/div |
| وسائط الزناد | Edge, Pulse, Video, Slope, Overtime, Window, Pattern, Interval, Under time, UART, LIN, CAN, SPI, IIC |
| القياسات التلقائية | Over 20 types (Vpp, Vmax, Vmin, Vtop, Vbase, Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle, Delay A→B↑, Delay A→B↓, Phase A→B↑, Phase A→B↓) |
| الواجهة | يو اس بي 2.0 |
| دعم نظام التشغيل | ويندوز 7، ويندوز 8، ويندوز 10، ويندوز 11 |
| الأبعاد (الطول × العرض × الارتفاع) | 175 مم × 105 مم × 25 مم (تقريبًا 6.9 بوصة × 4 بوصة × 1 بوصة) |
| وزن | حوالي 1.35 كجم (2.98 رطل) |
10. الضمان والدعم
Hantek provides a limited warranty for this product against defects in materials and workmanship. The warranty period typically starts from the date of purchase. Please refer to the warranty card included with your product or visit the official Hantek webالموقع للحصول على شروط وأحكام الضمان التفصيلية.
For technical support, software updates, or service inquiries, please contact Hantek customer service through their official website or the contact information provided in your product documentation. When contacting support, please have your product model (6254BE) and serial number ready.
الشركة المصنعة: هانتيك
Webموقع: www.hantek.com
