Danfoss 077B2317L

دليل تعليمات استخدام منظم الحرارة دانفوس 25T65 077B2317L للمجمد

1. المقدمة

This manual provides essential information for the installation, operation, and maintenance of the Danfoss Thermostat 25T65 077B2317L. This component is designed as a replacement part for various freezer and combined refrigerator models. Please read these instructions carefully before proceeding with installation or use to ensure proper function and safety.

2. معلومات السلامة

Always prioritize safety when working with electrical appliances. Improper installation or handling can lead to electric shock, injury, or damage to the appliance.

  • فصل الطاقة: Before any installation, maintenance, or repair, ensure the appliance is completely disconnected from the main power supply.
  • شخص مؤهل: Installation and replacement should ideally be performed by a qualified technician.
  • التعامل معها بحذر: The capillary tube is delicate. Avoid bending it sharply or damaging its insulation, as this can affect thermostat performance.
  • التوصيلات الكهربائية: Ensure all electrical connections are secure and correctly wired according to the appliance's wiring diagram.
  • الظروف البيئية: Do not expose the thermostat to excessive moisture or extreme temperatures outside its operating range.

3. وصف المنتج والميزات

The Danfoss 25T65 077B2317L is a mechanical thermostat manufactured in Europe, specifically designed for temperature control in freezers and combined refrigerators. It features a long capillary tube for precise temperature sensing and a signaling contact that activates when the temperature rises above a set point, indicating a potential issue or defrost cycle.

المميزات الرئيسية:

  • Model: 077B2317L
  • Capillary Length: 2600 mm
  • Electrical Connections: 6.3 mm / 4.8 mm terminals
  • Special Function: Signaling contact for temperature increase
  • Compatibility: Suitable for various models including R5351A, KB2039, K59L1137, 59KL1141, 077B6429, and 077B2317.
Danfoss Thermostat 077B2317L with capillary tube

الصورة 1: زيادةview of the Danfoss 077B2317L thermostat, showing the main body and the coiled capillary tube.

قاع view of Danfoss Thermostat 077B2317L showing model number

الصورة 2: قاع view of the thermostat, clearly displaying the model number '077B2317L' and other markings.

4. الإعداد والتثبيت

The installation of a replacement thermostat requires careful attention to detail. It is recommended that this procedure be carried out by a qualified appliance repair technician.

  1. انقطاع التيار الكهربائي: Unplug the freezer or refrigerator from the electrical outlet to ensure no power is supplied to the unit.
  2. Access Old Thermostat: Locate and carefully remove the access panel or housing that covers the existing thermostat.
  3. اتصالات المستندات: Before disconnecting, take clear photos or make a diagram of the wiring connections to the old thermostat. Note the position of each wire (e.g., power, compressor, signaling contact).
  4. إزالة منظم الحرارة القديم: Disconnect the electrical wires and carefully unmount the old thermostat. Gently remove the capillary tube from its sensing location, ensuring it does not get damaged or kinked.
  5. تثبيت منظم الحرارة الجديد: Mount the new Danfoss 077B2317L thermostat in the same location as the old one.
  6. توصيل الأسلاك: Reconnect the electrical wires to the new thermostat's terminals (6.3 mm / 4.8 mm) according to your documented diagram. Ensure connections are firm and secure.
  7. Position Capillary Tube: Carefully route the new capillary tube to the exact same sensing location as the original. The placement of the capillary tube is critical for accurate temperature control. Avoid sharp bends or kinks.
  8. قم بالتأمين وإعادة التجميع: Secure the thermostat and capillary tube in place. Reattach any access panels or housing removed earlier.
  9. امتحان: Plug the appliance back into the power outlet. Set the thermostat to the desired temperature and monitor the appliance's operation to ensure it cools correctly and cycles on/off as expected.
جانب view of Danfoss Thermostat 077B2317L showing electrical terminals

الصورة 3: جانب view of the thermostat, highlighting the electrical connection terminals.

جانب آخر view of Danfoss Thermostat 077B2317L showing different electrical terminals

الصورة 4: جانب آخر view, providing a clearer look at the various electrical terminals for wiring.

5. تعليمات التشغيل

Once installed, the Danfoss 25T65 077B2317L thermostat operates automatically to maintain the set temperature within your freezer or refrigerator. Most appliances with this type of thermostat will have an external or internal dial for temperature adjustment.

  • ضبط درجة الحرارة: Adjust the temperature dial (if present on your appliance) to your desired coldness level. Typically, a higher number on the dial indicates a colder setting.
  • يراقب: Allow several hours for the appliance to reach the new temperature setting. Use an appliance thermometer to verify the internal temperature.
  • Signaling Contact: The integrated signaling contact will activate if the temperature inside the appliance rises significantly, which can occur during defrost cycles or if there is a malfunction. This contact can be wired to an indicator light or alarm system, depending on the appliance's design.

6. الصيانة

The Danfoss 25T65 077B2317L thermostat is designed for reliable, long-term operation with minimal maintenance. However, periodic checks can help ensure optimal performance.

  • التفتيش البصري: Periodically inspect the thermostat and its capillary tube for any signs of physical damage, corrosion, or loose connections.
  • نظافة: Ensure the area around the thermostat and the capillary tube's sensing point is free from ice buildup or debris, which could interfere with accurate temperature sensing.
  • التحقق المهني: If you suspect a problem, have a qualified technician inspect the thermostat and the appliance's refrigeration system.

7. استكشاف الأخطاء وإصلاحها

If your appliance is not maintaining the correct temperature after thermostat replacement, consider the following:

مشكلةالسبب المحتملحل
Appliance not cooling at allNo power, faulty wiring, compressor issue, or completely failed thermostat.Check power supply. Verify wiring connections. Consult a technician for compressor or thermostat testing.
Appliance too warmThermostat set too high, capillary tube improperly placed, or thermostat malfunction.Adjust temperature setting. Ensure capillary tube is correctly positioned. If problem persists, thermostat may need replacement.
Appliance too cold / constantly runningThermostat set too low, capillary tube dislodged, or thermostat stuck in 'on' position.Adjust temperature setting. Verify capillary tube placement. If problem persists, thermostat may need replacement.
Signaling contact constantly activeHigh internal temperature, defrost cycle, or faulty signaling contact.Check appliance temperature. Observe if it's during a defrost cycle. If not, investigate cooling system or thermostat.

إذا لم تنجح خطوات استكشاف الأخطاء وإصلاحها في حل المشكلة، فمن المستحسن الاتصال بفني خدمة مؤهل.

8. المواصفات

مواصفةالتفاصيل
ماركةDANFOSS
رقم الموديل077B2317L
مرجع الشركة المصنعة077B2317L
يكتبMechanical Capillary Thermostat
طول الشعيرات الدموية2600 ملم
الاتصالات6.3 mm / 4.8 mm terminals
الأبعاد التقريبية (الطول × العرض × الارتفاع)60 × 30 × 25 ملم
ميزة خاصةSignaling contact for temperature increase
مادةالفولاذ المقاوم للصدأ (الخارجي)
امتثالEN 60730-2-9 (as per product title)

9. معلومات الضمان

Specific warranty details for replacement parts like the Danfoss 25T65 077B2317L thermostat typically depend on the retailer or the manufacturer's general policy for spare parts. Please refer to your purchase documentation or contact the seller for precise warranty terms and conditions. Keep your proof of purchase for any warranty claims.

10. الدعم

For technical assistance, installation guidance, or troubleshooting beyond the scope of this manual, please contact the retailer from whom you purchased the thermostat or a certified appliance repair professional. When seeking support, have your product model number (077B2317L) and any relevant appliance information readily available.

11. صور المنتج

قمة view of Danfoss Thermostat 077B2317L

الصورة 5: قمة view of the Danfoss 077B2317L thermostat, showing the main body and mounting points.

عام view of Danfoss Thermostat 077B2317L

الصورة 6: General perspective view of the thermostat, highlighting its compact design.

12. مقاطع فيديو رسمية للمنتج

No official product videos from the seller are available for this item.

المستندات ذات الصلة - 077B2317L

قبلview دليل تركيب ترموستات خدمة Danfoss 077B7
دليل تركيب منظمات الحرارة من سلسلة Danfoss 077B7، ويشمل طرازات لخزائن الآيس كريم، والثلاجات التجارية، ومبردات السوائل، وغيرها. يتضمن المواصفات الفنية وتفاصيل التطبيق.
قبلview دليل تركيب منظمات الحرارة للخدمة من Danfoss Type 077B7
Installation guide for Danfoss Type 077B7 series service thermostats (models 077B7001-077B7008). Provides detailed specifications, temperature settings, capillary lengths, and application information for refrigerators, freezers, and coolers.
قبلview دليل مستخدم نظام التدفئة الذكي Danfoss Ally™
دليل مستخدم شامل لنظام التدفئة الذكي Danfoss Ally™، يغطي التثبيت والميزات والمواصفات الفنية واستكشاف الأخطاء وإصلاحها لـ Gateway و Radiator Thermostat و Room Sensor و Boiler Relay و Protect RA و Power Module و منظمات الحرارة Icon™/Icon2™.
قبلview دليل استخدام ترموستات Danfoss Link™ وConnect للتحكم في التدفئة
يقدم دليل التطبيقات هذا من دانفوس معلومات شاملة عن أنظمة التحكم في التدفئة Danfoss Link™ وConnect Thermostats. يغطي الدليل مكونات النظام، والإرشادات العامة لإمدادات التدفئة وإدارة الغرف، ويوضح بالتفصيل تطبيقات الغلايات، والغلايات المركزية، وأنظمة التدفئة المركزية، ومضخات الحرارة، مما يُحسّن كفاءة الطاقة والراحة في المناطق السكنية.
قبلview منظمات حرارة الخدمة Danfoss 077B7: دليل التركيب والمواصفات
دليل تركيب شامل ومواصفات فنية لمنظمات الحرارة الخدمية من سلسلة Danfoss 077B7، بما في ذلك الطرازات 077B7060-077B7068 للتبريد التجاري وخزائن الآيس كريم.
قبلview Danfoss 077B Thermostat: Technical Specifications and Ordering Information
Detailed technical data, features, applications, and ordering codes for the Danfoss 077B thermostat, designed for precise temperature control in refrigerators, freezers, and coolers.