مقدمة
This manual provides essential instructions for the safe and effective use, setup, and maintenance of your KRAUSE STABILO+S Professional Multi-Purpose Ladder. This durable aluminum ladder is designed for various applications, offering versatility as a stepladder, extension ladder, and leaning ladder. Please read this manual thoroughly before initial use and retain it for future reference.
معلومات السلامة
تحذير: قد يؤدي عدم اتباع تعليمات السلامة هذه إلى إصابة خطيرة أو الوفاة.
- Always inspect the ladder for damage or defects before each use. Do not use a damaged ladder.
- تأكد من تثبيت جميع آليات القفل بالكامل قبل الصعود.
- Place the ladder on a firm, level, and non-slip surface.
- Maintain three points of contact (two hands and one foot, or two feet and one hand) while climbing or descending.
- لا تبالغ في مد ذراعيك. حافظ على جسمك في المنتصف بين القضبان الجانبية.
- Do not use the ladder near electrical wires or equipment.
- لا تتجاوز الحمولة القصوى 200 كجم.
- Ensure proper angle for leaning ladders (approximately 75 degrees).
- ارتداء الأحذية المناسبة وتجنب الملابس الفضفاضة.
- Do not use the ladder in high winds or adverse weather conditions.
الإعداد والتكوين
The KRAUSE STABILO+S ladder offers multiple configurations for various tasks.
1. Stepladder (A-Frame) Configuration
To set up the ladder as a stepladder, unfold the sections until they form an 'A' shape. Ensure the spreader bars or locking hinges are fully engaged and locked into place. The base stabilizers should be firmly on the ground.
Image: The KRAUSE STABILO+S ladder configured as a stable A-frame stepladder, ready for use.
2. Stepladder with Extension Configuration
For increased height while maintaining the stability of a stepladder, extend one section upwards from the A-frame. Ensure all locking pins for the extension are securely fastened. The extended section should be vertical and aligned with the base.
Image: The KRAUSE STABILO+S ladder set up as an A-frame with an additional section extended vertically, providing extra reach.
الصورة: تفصيلية view of the KRAUSE STABILO+S ladder in its A-frame extended configuration, highlighting the secure locking mechanisms and stable base.
3. Extension Ladder Configuration
To use the ladder as a full extension ladder, fully extend all sections and lock them into place. Ensure the ladder is leaning against a stable surface at the correct angle (approximately 75 degrees from the horizontal). The top of the ladder should extend at least 1 meter (3 rungs) above the landing point.
Image: The KRAUSE STABILO+S ladder fully extended and leaning against a wall, demonstrating its maximum reach as an extension ladder.
4. Two Separate Leaning Ladders Configuration
The ladder can be separated into two individual leaning ladders. This configuration is useful for tasks requiring two separate access points or for creating a scaffold base (with appropriate accessories, not included). Ensure each section is stable and properly secured before use.
Image: The KRAUSE STABILO+S ladder disassembled into two distinct sections, one configured as a short leaning ladder and the other as a compact A-frame.
تعليمات التشغيل
Always ensure the ladder is correctly configured for the task at hand and all safety precautions are observed.
- التسلق: Face the ladder when climbing or descending. Use both hands to grip the side rails or rungs.
- عمل: Keep your belt buckle (navel) within the side rails. Avoid pushing or pulling objects while on the ladder, as this can destabilize it.
- الموقع: For leaning ladders, ensure the top rests against a solid, stable surface. For stepladders, ensure all four feet are firmly on the ground.
- استقرار: Never move a ladder while someone is on it. Ensure the area around the base of the ladder is clear.
Image: A person safely using the KRAUSE STABILO+S ladder in its A-frame extended configuration for a task, demonstrating proper usage and stability.
صيانة
Regular maintenance ensures the longevity and safe operation of your ladder.
- تنظيف: نظف السلم بانتظام باستخدام مواد التنظيف المناسبة.amp cloth to remove dirt, grease, or other contaminants. Avoid harsh chemicals that could damage the aluminum.
- تقتيش: Periodically check all rungs, side rails, locking mechanisms, and feet for wear, damage, or loose components. Pay close attention to hinges and pivot points.
- تخزين: Store the ladder in a dry, protected area away from extreme temperatures and direct sunlight. Ensure it is stored in a way that prevents accidental falling or damage.
- الإصلاحات: Do not attempt to repair damaged parts yourself. Contact a qualified technician or the manufacturer for genuine replacement parts and professional repair.
استكشاف الأخطاء وإصلاحها
- السلم غير مستقر: Ensure all locking mechanisms are fully engaged. Check that the ladder is on a firm, level surface. Verify the correct angle for leaning ladders.
- صعوبة في تمديد/طي الأجزاء: Clean the rails and rungs to remove any debris. Apply a small amount of silicone-based lubricant to the sliding parts if necessary, avoiding rungs.
- المكونات التالفة: Immediately cease use of the ladder. Do not attempt temporary repairs. Contact customer support for guidance on replacement parts or professional repair.
تحديد
| ميزة | التفاصيل |
|---|---|
| ماركة | كراوس |
| رقم الموديل | 131669 |
| مادة | الألومنيوم |
| Number of Rungs | 3 x 10 (sections) |
| أبعاد المنتج | 490 x 12.67 x 465 cm (approximate, varies by configuration) |
| وزن العنصر | 25.5 كجم |
| سعة التحميل | 200 كجم |
| لون | الأزرق (اللمسات النهائية) |
الضمان والدعم
For warranty information, technical support, or to purchase genuine replacement parts, please refer to the official Krause webالموقع أو اتصل بالوكيل المعتمد لديك. احتفظ بإيصال الشراء كإثبات للشراء.
