مقدمة
ال دبليوampler Catacombs is a programmable, all-in-one delay and reverb pedal designed to provide a wide range of time-based effects for musicians. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Catacombs pedal.
المنتج انتهىview
The Catacombs pedal integrates 11 popular delay and reverb sounds into a single, intuitive unit. It features studio-quality 48 kHz sampling rate with 24-bit audio conversion, 8 onboard preset locations, and MIDI compatibility for up to 128 total presets.
الشكل 1: أمام view من دبليوampler Catacombs pedal, showing controls for delay and reverb effects, input/output jacks, and footswitches.
الشكل 2: بزاوية view من دبليوampler Catacombs pedal, highlighting its compact design and various control knobs.
يثبت
متطلبات الطاقة
ال دبليوampler Catacombs pedal requires a standard 9V DC power supply (not included) with a center-negative barrel connector. Ensure the power supply provides sufficient current for optimal performance.
توصيل الدواسة
- قم بتوصيل آلتك الموسيقية (مثل الجيتار) بـ مونو في or مدخل ستيريو يتم توصيل مقبس الصوت على الجانب الأيمن من الدواسة باستخدام كابل آلة موسيقية قياسي مقاس 1/4 بوصة.
- قم بتوصيل خرج أحادي or ستيريو OUT قم بتوصيل مقبس على الجانب الأيسر من الدواسة بـ amplifier or next effect pedal.
- Connect the 9V DC power supply to the 9 فولت تيار مستمر جاك المدخلات.
- For MIDI control, connect a MIDI cable to the ميدي مدخل.
تعليمات التشغيل
ضوابط أكثرview
- Delay Type Knob: Selects between various delay types including Tape, SPC, FTE, BBD, ANLG, and DIGI.
- Reverb Type Knob: Selects between reverb types such as SHMR (Shimmer), PLT (Plate), SPR (Spring), ROOM, and HALL.
- Time/Shimmer Knob: Adjusts the delay time or shimmer intensity depending on the selected effect.
- Feedback/Decay Knob: Controls the number of delay repeats or the reverb decay time.
- Mod Rate Knob: Adjusts the modulation rate for effects with modulation.
- Delay Tone Knob: Shapes the tone of the delay repeats.
- Reverb Tone Knob: Shapes the tone of the reverb effect.
- Bypass/ALT Footswitch: Toggles the effect on/off. Hold to access alternate functions (ALT mode).
- Preset/Save Footswitch: Cycles through presets. Hold to save current settings to a preset location.
- Tap Tempo Footswitch: Taps in the desired delay tempo.
حفظ واستدعاء الإعدادات المسبقة
The Catacombs pedal allows for 8 onboard preset locations. To save a preset, adjust the knobs to your desired sound, then press and hold the Preset/Save footswitch until the indicator lights confirm the save. To recall a preset, short press the Preset/Save footswitch to cycle through the saved locations.
Alternate Functions (ALT Mode)
Some knobs have alternate functions accessible by holding the Bypass/ALT footswitch. When in ALT mode, the indicator light will change (e.g., from blue to red as noted in some user feedback), allowing you to adjust secondary parameters. Release the footswitch to return to normal operation.
صيانة
To ensure the longevity and optimal performance of your Wampler Catacombs pedal, follow these maintenance guidelines:
- Keep the pedal clean by wiping it with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- قم بتخزين الدواسة في مكان بارد وجاف بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى.
- افصل الطاقة عند عدم استخدامها لفترات طويلة.
- Regularly check all cable connections for secure fit.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| لا يصدر أي صوت عند الضغط على الدواسة. | Incorrect power supply, faulty cables, incorrect input/output connections. | Verify power supply is 9V DC center-negative. Check all instrument cables. Ensure input is connected to IN and output to OUT. |
| التأثير إما خفيف جداً أو شديد جداً. | Knobs are set incorrectly, or in ALT mode unintentionally. | Adjust the relevant control knobs (Time, Feedback, Tone). Check if the pedal is in ALT mode and adjust accordingly. |
| Cannot save or recall presets. | Incorrect footswitch operation. | تأكد من أنك تمسك Preset/Save footswitch long enough to save. For recalling, use short presses. |
| Noise or hum. | حلقة أرضية، مصدر طاقة معيب، تداخل. | Use an isolated power supply. Try different cables. Ensure proper grounding of all equipment. |
تحديد
- نموذج: CATACOMBS
- أبعاد: 7.25 × 5.7 × 3.75 بوصة
- وزن السلعة: 1.39 رطل
- مصدر الطاقة: Corded Electric (9V DC, center-negative, power supply not included)
- تنسيق الإشارة: التناظرية
- Audio Output Effects: التأخير، الصدى
- Sampمعدل لينغ: 48 كيلو هرتز
- Audio Bit Depth: 24 بت
- المسبقة: 8 onboard, 128 via MIDI
- Manufacture Location: Designed and Built in the USA
الضمان والدعم
Wampler Pedals products are designed and built to high standards. For warranty information and technical support, please refer to the official Wampدواسات لير webالموقع الإلكتروني أو تواصل مع خدمة العملاء مباشرةً. احتفظ بإثبات الشراء لطلبات الضمان.
لمزيد من المساعدة، قم بزيارة Wampler Store on Amazon.
