مقدمة
This manual provides detailed instructions for the safe assembly, proper usage, and maintenance of your Coaster Home Furnishings Nathan Eastern King Size Panel Bed Frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
معلومات السلامة
- تأكد من وجود جميع الأجزاء وسلامتها قبل التجميع. لا تستخدم المنتج إذا كان أيٌّ منها مفقودًا أو مكسورًا.
- Assemble the bed frame on a soft, clean surface to prevent scratches or damage.
- Two or more people are recommended for assembly to prevent injury and ensure proper alignment.
- Do not overtighten screws or bolts, as this may damage the wood.
- This bed frame requires a foundation (box spring or equivalent) for proper mattress support. Do not place a mattress directly on the slats without a foundation.
- احتفظ بالأجزاء الصغيرة بعيدًا عن متناول الأطفال أثناء التجميع.
- قم بفحص جميع الوصلات بشكل دوري للتأكد من أنها تبقى محكمة.
محتويات الحزمة
تأكد من تضمين جميع المكونات التالية في الحزمة الخاصة بك:
- لوح الرأس (1)
- لوح القدم (1)
- القضبان الجانبية (2)
- Slats (Set)
- Hardware Pack (Bolts, washers, nuts, Allen wrench)
تعليمات التجميع
Follow these steps to assemble your bed frame:
- إعداد المنطقة: قم بإخلاء مساحة واسعة للتجميع. رتب جميع المكونات والأدوات.
- قم بتثبيت القضبان الجانبية على لوح الرأس: Align the pre-drilled holes on the side rails with the corresponding holes on the headboard posts. Secure using the provided bolts, washers, and nuts. Do not fully tighten yet.
- قم بتثبيت القضبان الجانبية على لوح القدم: Repeat the previous step to attach the other ends of the side rails to the footboard. Ensure the footboard's flared legs are correctly oriented.
- شد جميع الوصلات: Once all four corners are connected, carefully tighten all bolts using the Allen wrench. Ensure the frame is stable and square.
- تثبيت الشرائح: Place the wooden slats across the width of the bed frame, resting them on the support ledges of the side rails. Ensure they are evenly spaced and secure. Some slats may require screwing into the side rails; refer to your specific hardware for details.
إرشادات الاستخدام
- Foundation Required: This panel bed frame is designed to be used with a mattress foundation (e.g., box spring, bunkie board). A mattress placed directly on the slats without a foundation may void the warranty and lead to premature wear of the mattress and frame.
- توزيع الوزن: Ensure weight is evenly distributed across the bed frame. Avoid standing or jumping on the bed.
- الموقع: Position the bed frame on a level surface to prevent wobbling or instability.
الصيانة والعناية
To maintain the appearance and longevity of your bed frame, follow these care instructions:
- تنظيف: Clean the wood surfaces using a damp cloth. Wipe dry immediately to prevent water marks.
- تجنب المواد الكيميائية القاسية: Do not use strong chemicals, abrasive cleaners, or polishes that may damage the finish.
- التعرض لأشعة الشمس: تجنب التعرض لأشعة الشمس المباشرة لفترات طويلة، مما قد يؤدي إلى بهتان أو تغير لون الخشب.
- التحكم في الرطوبة: Maintain a consistent humidity level in the room to prevent wood from cracking or warping.
- فحص الأجهزة: Periodically inspect and tighten all assembly hardware to ensure the frame remains stable.
تحديد
| رقم الموديل | 224601كي |
| ماركة | أثاث كوستر الفاخر |
| مقاس | الملك الشرقي |
| أبعاد المنتج | 86.25 بوصة طول × 79.25 بوصة عرض × 60 بوصة ارتفاع |
| لون | رمادي |
| مادة | Oak Veneer, Asian Hardwood |
| مطلوب التجميع | نعم |
| Foundation Required | نعم |
| وزن العنصر | 134.5 رطل |
| رمز المنتج الموحد | 021032754099 |
Troubleshooting / Common Questions
- اهتزاز إطار السرير: Ensure all bolts are securely tightened. Check that the bed is on a level surface.
- أصوات صرير: Squeaking can often be resolved by tightening all hardware. If the issue persists, check the foundation and mattress for proper fit and support.
- Why is a foundation required? Panel beds are designed with slats that provide support for a foundation (like a box spring or bunkie board), which in turn supports the mattress. This design ensures proper mattress longevity and comfort.
الضمان والدعم
Coaster Fine Furniture products are manufactured with quality and care. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Coaster Fine Furniture website. For assistance with parts, assembly, or any other inquiries, please contact Coaster Fine Furniture customer service.
يمكنك أيضًا زيارة Coaster Fine Furniture Store on Amazon لمزيد من المعلومات والمنتجات.
About Coaster Fine Furniture
Coaster Fine Furniture has been designing, crafting, and distributing stylish furniture for nearly four decades, offering a range of collections to suit various tastes and lifestyles.
