KOORUI KR20Y Single Monitor Desk Mount User Manual

مقدمة

Thank you for choosing the KOORUI KR20Y Single Monitor Desk Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your monitor arm. Designed for 17-32 inch flat and curved screens, this mount offers VESA 75x75mm and 100x100mm compatibility and supports monitors weighing between 2-9 kg (4.4-19.8 lbs). Please read this manual thoroughly before assembly and retain it for future reference.

معلومات السلامة

يرجى مراعاة احتياطات السلامة التالية لمنع الإصابة أو الضرر:

• لا تتجاوز سعة الحمولة القصوى البالغة 9 كجم (19.8 رطلاً).
• Ensure the mounting surface (desk) is strong enough to support the combined weight of the mount and your monitor.
• Follow all assembly instructions carefully. If you have any doubts, consult a qualified professional.
• احتفظ بالأطفال والحيوانات الأليفة بعيدًا أثناء التثبيت.
• قم بفحص جميع التوصيلات والمثبتات بشكل منتظم للتأكد من بقائها آمنة.
• Avoid pinching cables during adjustment to prevent damage.

محتويات الحزمة

يرجى التأكد من وجود كافة المكونات قبل البدء في التثبيت:

• مجموعة ذراع الشاشة
• سي- Clamp معدات التركيب
• Grommet Mounting Hardware
• لوحة VESA
• Monitor Mounting Screws (various sizes)
• مفاتيح سداسية / أدوات ضبط
• مقاطع إدارة الكابلات
• دليل المستخدم (هذا المستند)

Image: All components of the KOORUI KR20Y Monitor Arm, including the arm, C-clamp, and grommet mount options.

تحديد

Image: Visual representation of the monitor arm's universal compatibility, showing supported screen sizes (17-32 inch), load capacity (2-9kg), and VESA standards (75x75mm, 100x100mm).

الإعداد والتثبيت

The KOORUI KR20Y monitor arm offers two installation options: C-Clamp Mount and Grommet Mount. Choose the method best suited for your desk.

Image: Diagram illustrating the two available installation methods: C-Clamp حامل وحامل بحلقة معدنية.

1. C-Clamp جبل

This method is suitable for desks with a thickness between 20-80mm (0.78-3.14 inches).

1. إرفاق C-clamp ضع القاعدة على حافة مكتبك.
2. شد القفلamp screw until the base is securely fastened to the desk. Ensure it is stable and does not wobble.
3. أدخل العمود الرئيسي لذراع الشاشة في C-clamp قاعدة.
4. Secure the pole with the provided screw or knob.

2. Grommet Mount

This method requires a pre-drilled hole in your desk with a diameter of 10-50mm (0.39-1.96 inches) and is suitable for desks with a thickness between 20-90mm (0.78-3.54 inches).

1. Disassemble the C-clamp components from the base if they are pre-attached.
2. Insert the grommet bolt through the pre-drilled hole in your desk.
3. Secure the grommet base from underneath the desk using the provided washer and nut. Tighten firmly.
4. أدخل العمود الرئيسي لذراع الشاشة في قاعدة التثبيت.
5. Secure the pole with the provided screw or knob.

3. تركيب الشاشة

1. Attach the VESA plate to the back of your monitor using the appropriate screws. Ensure the screws are not overtightened.
2. Slide the monitor (with the attached VESA plate) onto the arm's VESA head.
3. Secure the monitor to the arm using the locking mechanism (if present) or by tightening the designated screws.

4. إدارة الكابلات

قم بتمرير كابلات الشاشة عبر قنوات إدارة الكابلات المدمجة الموجودة على الذراع للحفاظ على مساحة عمل مرتبة.

Image: The monitor arm with cables neatly routed through its integrated cable management system, contributing to a clean desk setup.

تعليمات التشغيل

The KOORUI KR20Y monitor arm features a gas spring system for smooth and effortless adjustments. Adjustments can be made to achieve an ergonomic viewتجربة رائعة.

Image: Detailed diagram showing the full range of motion of the monitor arm, including tilt, swivel, rotation, and maximum extension/height.

1. ضبط الارتفاع

Gently push or pull the monitor up or down to adjust its height. The gas spring will hold the monitor in your desired position. If the arm is too stiff or too loose, adjust the gas spring tension (see صيانة قسم).

2. تعديل الميل

Grasp the top and bottom edges of your monitor and tilt it forward or backward to achieve an optimal viewing angle. The tilt range is +85° to -30°.

3. ضبط الدوران

Rotate the monitor left or right at the VESA plate connection point. The swivel range is ±90°.

4. Rotation (Portrait/Landscape)

Rotate the monitor 360° to switch between landscape and portrait orientations as needed.

الصورة: الأشعة السينية view highlighting the premium gas spring mechanism within the monitor arm, indicating its durability and smooth adjustment capabilities.

صيانة

• Gas Spring Tension Adjustment: If the monitor arm does not hold its position or is difficult to move, use the provided hex key to adjust the gas spring tension. Turn clockwise to increase tension (for heavier monitors) and counter-clockwise to decrease tension (for lighter monitors). Adjust gradually until the arm moves smoothly and holds the monitor securely.
• تنظيف: امسح ذراع الشاشة بقطعة قماش ناعمة.amp القماش. تجنب استخدام المنظفات أو المذيبات الكاشطة.
• التفتيش الدوري: افحص جميع البراغي والوصلات بانتظام للتأكد من أنها محكمة وآمنة.

استكشاف الأخطاء وإصلاحها

الضمان والدعم

For warranty information or technical support, please refer to the warranty card included with your product or visit the official KOORUI website. If you encounter any issues not covered in this manual, please contact KOORUI customer service for assistance.