1. المقدمة
The Eastron SDM630Modbus-V3 is a versatile three-phase digital electricity meter designed for accurate measurement of active and reactive power in 1-phase AC (1p2w) as well as 3-phase (3p3w, 3p4w) networks. Its compact design, suitable for 35mm DIN rail mounting, and a wide load range up to 80A make it an ideal solution for various applications, including photovoltaics and e-mobility. This manual provides essential information for the proper installation, operation, and maintenance of your device.
Figure 1: Eastron SDM630Modbus-V3 Digital Electricity Meter
تعرض هذه الصورة الواجهة الأمامية view of the Eastron SDM630Modbus-V3 meter, showing its LCD display, control buttons, and branding. The display indicates current readings and units.
2. الإعداد والتثبيت
The SDM630Modbus-V3 is designed for easy snap-on mounting on a standard 35mm DIN rail. Ensure all power is disconnected before beginning installation.
2.1 التركيب
The meter has a width of 4HP (72mm) and is designed for secure attachment to a 35mm DIN rail. Simply align the meter with the rail and press firmly until it clicks into place.
Figure 2: Key Features and DIN Rail Mounting
This image highlights various features of the meter, including the pulse LED, backlit LCD display, simple touch operation, 4-module width, sealing opening for security, and 35mm DIN rail mounting capability.
2.2 توصيلات الأسلاك
The meter supports various input configurations:
- 3-مرحلة 4 أسلاك
- 3-مرحلة 3 أسلاك
- 1-مرحلة 2 أسلاك
Refer to the wiring diagram provided with the product for specific connection points. Ensure all connections are secure and comply with local electrical codes. The meter can handle measurements from 20mA up to a maximum of 80A continuous load.
Figure 3: Meter for DIN Rails - Key Capabilities
This image illustrates the meter's capabilities, including its function as a three-phase multi-function network analyzer, 100A direct load, compatibility with 3P4W/3P3W/1P2W systems, 4-module width, measurement of various parameters (kWh, kVArh, W, Var, VA, PF, Hz, dmd, V, A, THD), bi-directional measurement for kW and kWh, RS485 Modbus RTU, and two pulsed outputs.
3. تعليمات التشغيل
The SDM630Modbus-V3 features a clear, illuminated display and simple direct operation for viewing various measurement parameters.
3.1 العرض والتنقل
The LCD display shows real-time energy consumption and other measured values. Use the navigation buttons (typically 'M' for Menu, 'P' for Page, and arrow keys) to cycle through different display screens and access settings.
3.2 Measurement Options
The meter provides a wide range of measurement data, including:
- Total Active Energy (kWh)
- Total Reactive Energy (kVArh)
- الطاقة النشطة (كيلوواط)
- Reactive Power (kVArh)
- Apparent Power (kVA)
- عامل القدرة
- المجلدtagه (الخامس)
- الحالي (أ)
- التردد (هرتز)
Active power (kWh) and reactive power (kVArh) are calculated on a net basis, displaying both total counter readings and separate import/export values.
3.3 واجهات الاتصال
The meter is equipped with:
- RS485 Modbus-RTU Interface: For remote reading and integration into energy management systems. Supports communication up to 19.2bps.
- 2 Pulse Outputs (S0): For import and/or export, useful for connecting to external data loggers or control systems. P1 is fixed at 400 imp/kWh, while P2 is adjustable.
4. الصيانة
The Eastron SDM630Modbus-V3 is designed for long-term, reliable operation with minimal maintenance. Regular inspection of connections and the meter's physical condition is recommended.
- تنظيف: Use a soft, dry cloth to clean the exterior of the meter. Do not use abrasive cleaners or solvents.
- الاتصالات: قم بفحص جميع توصيلات الأسلاك بشكل دوري للتأكد من بقائها محكمة وخالية من التآكل.
- ختم: The meter includes a sealing opening for security after installation, protecting against tampering. Ensure this seal remains intact if required for billing or regulatory purposes.
No user-serviceable parts are inside the meter. Refer all internal servicing to qualified personnel.
5. استكشاف الأخطاء وإصلاحها
If you encounter issues with your Eastron SDM630Modbus-V3 meter, consider the following common problems and solutions:
- لا يوجد عرض/طاقة:
- تحقق من جميع توصيلات الطاقة للتأكد من أنها آمنة وموصلة بشكل صحيح.
- تأكد من أن مستوى الصوت المدخلtage is within the specified range (100~280V AC L-N, 100~480V AC L-L).
- قراءات خاطئة:
- Confirm that the wiring configuration (1-phase, 3-phase 3-wire, 3-phase 4-wire) matches your electrical system.
- Ensure current transformers (CTs), if used with a different model, are correctly installed and ratio is configured. (Note: This model is direct measuring up to 80A).
- Check for any external interference or magnetic fields near the meter.
- Communication Issues (RS485):
- Verify the RS485 wiring polarity (A/B).
- Check Modbus address and baud rate settings on both the meter and the master device.
- Ensure proper termination resistors are used on the Modbus network if necessary.
- Pulse Output Not Working:
- Confirm the pulse output settings (P1 fixed, P2 adjustable) are correct.
- Check the connection to the receiving device.
If problems persist after attempting these solutions, please contact Eastron technical support or your local distributor for assistance.
For more detailed information on Modbus communication and specific error codes, refer to the comprehensive technical manual available from Eastron.
6. المواصفات
The following table outlines the technical specifications of the Eastron SDM630Modbus-V3 digital electricity meter:
Figure 4: Detailed Specification Table
This image provides a comprehensive table detailing the electrical, performance, and communication specifications of the Eastron SDM630Modbus-V3 meter, including input voltage, frequency, current range, pulse outputs, Modbus parameters, and environmental conditions.
| المعلمة | قيمة |
|---|---|
| حجم الإدخالtagه (LN) | 100~280 فولت تيار متردد |
| حجم الإدخالtag(ل.ل.) | 100~480 فولت تيار متردد |
| نطاق التردد | 45~66 هرتز |
| نطاق القياس الحالي | 20mA to max. 80A continuous load |
| S0 Pulse Outputs | 2 |
| S0 Pulse Rate (P1) | Fixed at 400 imp/kWh |
| الاتصالات التسلسلية | وحدة التحكم عن بعد RS485 MODBUS |
| معدل الباود | حتى 19.2kbps |
| الأبعاد (الطول × العرض × الارتفاع) | 10 × 7.2 × 6.6 سم |
| وزن | 380 جرام |
| التركيب | 35mm DIN rail (4HP width) |
| درجة حرارة التشغيل | من -25 درجة مئوية إلى +55 درجة مئوية |
الشكل 5: أبعاد المنتج
This image provides a technical drawing of the meter with its dimensions: Height 100mm, Width 72mm, Depth 66mm, and DIN rail depth 35mm.
7. الضمان والدعم
Eastron products are manufactured to high quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Eastron website. In case of technical issues or inquiries not covered in this manual, please contact Eastron customer support or your authorized dealer. When contacting support, please have your product model number (SDM630-MODBUS-MID V3) and serial number ready.
