دليل مستخدم وحدة التحكم بالطيران Hobbywing Skywalker V2 50A بدون فرش

مقدمة

Thank you for choosing the Hobbywing Skywalker V2 50A Brushless Flight Controller (ESC). This ESC is designed for RC aircraft, offering reliable performance and advanced features. This manual provides essential information for proper installation, operation, and maintenance to ensure safe and optimal use of your product.

إرشادات السلامة

Please read and understand all safety instructions before operating the ESC. Failure to do so may result in damage to the product, property, or personal injury.

• Always connect the ESC to the motor and battery correctly, observing polarity.
• تأكد من أن جميع التوصيلات آمنة لمنع حدوث دوائر قصيرة.
• Keep the ESC away from moisture, dust, and extreme temperatures.
• Do not exceed the specified current and voltagتقييمات البريد.
• Always disconnect the battery after use.
• Perform initial setup and throttle calibration with the propeller removed for safety.

المنتج انتهىview

The Hobbywing Skywalker V2 50A ESC is an advanced brushless flight controller featuring a 32-bit microprocessor for enhanced throttle response and reduced operating temperature. It supports 3-4S LiPo batteries and includes a 5V@5A SBEC. The ESC is equipped with DEO (Driving Efficiency Optimization) technology and offers various programmable braking modes and protection mechanisms.

This image displays the Hobbywing Skywalker V2 50A Brushless Flight Controller. It is a compact, black-sleeved electronic speed controller with various wires extending from both ends. The label on the ESC clearly indicates 'HOBBYWING SKYWALKER 50A V2-UBEC', '3-4S Lipo SBEC 5V@5A', and regulatory marks like 'RoHS FC CE'. The wires are color-coded for different connections, including thicker black wires for motor connections and thinner red, yellow, and white wires for signal and power input.

المواصفات الفنية

محتويات الحزمة

تتضمن الحزمة عادةً العناصر التالية:

• Hobbywing Skywalker V2 50A Brushless Flight Controller
• LED Program Box (H.W30501003) or compatible transmitter for programming (may be sold separately)

الإعداد والتثبيت

الأسلاك

Proper wiring is crucial for the safe and correct operation of your ESC. Refer to the diagram below for typical connections. Always ensure correct polarity.

• اتصال المحرك: Connect the three thicker black wires from the ESC to the three motor wires. The order may affect motor rotation direction; swap any two wires if the motor spins in the wrong direction.
• توصيل البطارية: Connect the red (+) and black (-) wires from the ESC to your LiPo battery, ensuring correct polarity.
• اتصال جهاز الاستقبال: Connect the signal cable (usually a three-wire servo connector) from the ESC to the throttle channel of your RC receiver.

التكوين الأولي

Before first flight, it is recommended to perform throttle range calibration and configure any desired programmable parameters.

عملية

معايرة نطاق الخانق

This procedure ensures that the ESC correctly recognizes the full throttle range from your transmitter.

1. قم بتشغيل جهاز الإرسال الخاص بك واضبط عصا التحكم في السرعة على أقصى وضع لها.
2. قم بتوصيل البطارية بوحدة التحكم الإلكترونية. سيصدر المحرك سلسلة من أصوات التنبيه.
3. When you hear a specific tone (usually two short beeps), move the throttle stick to its minimum position.
4. The ESC will emit another series of beeps, confirming the throttle range has been learned.
5. Disconnect the battery. The calibration is complete.

برمجة ESC

The Skywalker V2 50A ESC offers various programmable parameters to fine-tune its performance. These can be adjusted using a Hobbywing LED Program Box (H.W30501003) or through your transmitter.

Programmable features include:

• Brake Type and Brake Force
• قطع المجلدtage (for LiPo cell protection)
• LiPo Cell Count Setting
• وضع بدء التشغيل
• وضع البحث
• توقيت
• Active Freewheel

Refer to the specific instructions provided with your LED Program Box or transmitter for detailed programming steps.

صيانة

تساعد الصيانة الدورية على إطالة عمر وحدة التحكم الإلكترونية (ESC) وضمان موثوقيتها.

• Keep the ESC clean and free from dirt, dust, and debris.
• Inspect all wires and connectors periodically for signs of wear, damage, or corrosion.
• تأكد من وجود تدفق هواء كافٍ حول وحدة التحكم الإلكترونية أثناء التشغيل لمنع ارتفاع درجة الحرارة.
• Store the ESC in a dry, cool place when not in use.

استكشاف الأخطاء وإصلاحها

If you encounter issues with your ESC, refer to the table below for common problems and solutions.

الضمان والدعم

Hobbywing products are manufactured to high-quality standards. This product typically comes with a 1-year availability for spare parts. For warranty claims or technical support, please contact your retailer or visit the official Hobbywing webموقع للحصول على المساعدة.