دليل تعليمات علبة الكمبيوتر NZXT H6 Flow RGB متوسطة الحجم ذات تدفق الهواء (أبيض)

مقدمة

This manual provides essential information for setting up, operating, and maintaining your NZXT H6 Flow RGB Mid-Tower Airflow PC Case. Designed for optimal thermal performance and a clean aesthetic, this compact dual-chamber case features panoramic glass panels and pre-installed RGB fans.

تتضمن الميزات الرئيسية ما يلي:

• Wraparound glass panels with a seamless edge for an unobstructed interior view.
• Compact dual-chamber design for improved thermal performance and a clean build.
• Three pre-installed 120mm RGB fans, angled for optimal cooling and vibrant lighting.
• Airflow-optimized perforation patterns on top and side panels for enhanced performance and dust filtration.
• Intuitive cable management system with wide channels and straps for simplified building.

الإعداد والتثبيت

Follow these steps to assemble your PC within the NZXT H6 Flow RGB case.

1. إعداد القضية

The NZXT H6 Flow RGB case features tool-free access to its panels for easy installation and upgrades.

إزالة الألواح الجانبية

The main glass side panel can be removed by applying gentle pressure to the notch at the back. The opposite steel side panel also features a notch for removal. Exercise caution when removing the steel panel as it does not sit independently once disengaged.

إزالة اللوحة العلوية

The top mesh panel is removed by pulling up on a tab located at the back. This reveals the top fan/radiator mounting area and a magnetic dust filter.

2. تركيب اللوحة الأم

The H6 Flow RGB supports Mini-ITX, Micro-ATX, ATX, and Extended ATX motherboards. Utilize the pre-installed standoffs and cable routing cutouts for a clean installation.

3. تركيب التيار الكهربائي

The power supply unit (PSU) is mounted in a dedicated compartment behind the motherboard tray. The case supports ATX PSUs up to 180mm in length.

4. تركيب جهاز التخزين

The case includes a storage bracket that supports two 2.5-inch SSDs or two 3.5-inch HDDs. This bracket is removable via a single thumbscrew for easier installation.

5. تثبيت وحدة معالجة الرسومات (GPU)

The case accommodates graphics cards up to 410mm in length. An optional vertical GPU mount can be installed (sold separately).

6. تركيب المروحة والرادياتير

The H6 Flow RGB comes with three pre-installed 120mm RGB fans on the angled front-right panel, optimized for GPU cooling. Additional fan and radiator support is available:

• قمة: Supports up to a 360mm radiator or three 120mm/two 140mm fans.
• جانب: The pre-installed 120mm RGB fans are located here. This mount can also support two 140mm fans or radiators up to 360mm.
• قاع: Supports two 120mm or two 140mm fans for intake.
• مؤخرة: Supports one 120mm fan.

7. إدارة الكابلات

The dual-chamber design and intuitive cable management system simplify the build process. Utilize the wide channels and included straps behind the motherboard tray to keep cables tidy and out of sight.

تعليمات التشغيل

Once your PC is fully assembled, follow these steps to operate your system.

1. تشغيل/إيقاف التشغيل

Locate the large power button on the top-right side of the case. Press it once to power on your system. To power off, either shut down via your operating system or press and hold the power button.

2. منافذ الإدخال/الإخراج الأمامية

The front I/O panel is conveniently located at the bottom-right corner of the case, providing easy access to:

• 2 منفذ USB 3.0
• 1 x USB 3.2 Gen 2 Type-C Port
• 1 x Combo Headphone/Microphone Jack

3. التحكم في إضاءة RGB

The pre-installed RGB fans can be controlled via compatible motherboard RGB software or NZXT's CAM software, depending on your system's configuration. Refer to your motherboard manual for specific RGB header connections and software instructions.

صيانة

تساعد الصيانة المنتظمة على ضمان الأداء الأمثل وطول عمر علبة الكمبيوتر لديك.

1. تنظيف فلتر الغبار

The top panel features a magnetic dust filter that can be easily removed for cleaning. The bottom of the case also has a pull-out filter that extends the entire length of the case.

To clean, gently remove the filters and use compressed air or a soft brush to clear any accumulated dust. Reinstall once clean.

2 تنظيف بشكل عام

بالنسبة للأسطح الخارجية، استخدم مادة ناعمة و...amp cloth to wipe down the steel and glass panels. Avoid abrasive cleaners that could scratch the surfaces.

استكشاف الأخطاء وإصلاحها

If you encounter any issues with your NZXT H6 Flow RGB case, consider the following general troubleshooting steps:

• قضايا الطاقة: Ensure all power cables (PSU to motherboard, GPU, etc.) are securely connected. Verify the power supply switch is in the 'on' position.
• Fan/RGB Malfunction: Check all fan and RGB connections to the motherboard or any control hubs. Ensure relevant software (e.g., NZXT CAM, motherboard RGB software) is installed and configured correctly.
• ارتفاع درجة الحرارة: Confirm that all fans are spinning correctly and are oriented for proper airflow (intake/exhaust). Ensure dust filters are clean and not obstructing airflow.

For more detailed troubleshooting or specific technical support, please visit the official NZXT support webموقع.

تحديد

الضمان والدعم

For warranty information, technical support, or to download the latest drivers and software, please visit the official NZXT webيمكنك زيارة الموقع الإلكتروني أو الاتصال بخدمة العملاء مباشرةً. قد يتطلب تفعيل الضمان تسجيل المنتج.