مقدمة
Thank you for choosing the Beghelli 4340F 100 Lumen LED Emergency Lamp. This device is designed to provide reliable emergency lighting in various environments. Please read this manual carefully before installation and use to ensure proper function and safety.
المنتج انتهىview
The Beghelli 4340F is a compact and efficient LED emergency lamp, featuring a built-in battery for automatic operation during power outages. Its modern design and durable plastic construction make it suitable for both indoor and outdoor applications.
ماذا يوجد في الصندوق
- Beghelli 4340F 100 Lumen LED Emergency Lamp
- معدات التركيب
- دليل المستخدم
معلومات السلامة
- قم دائمًا بفصل الطاقة قبل التثبيت أو الصيانة.
- يجب أن يتم إجراء التثبيت بواسطة كهربائي مؤهل وفقًا للوائح الأسلاك المحلية.
- Do not expose the unit to extreme temperatures or direct moisture unless specified for outdoor use.
- Do not attempt to open or repair the unit yourself. Refer to qualified service personnel.
- Ensure the mounting surface is stable and can support the weight of the lamp.
الإعداد والتثبيت
The Beghelli 4340F emergency lamp is designed for wall-mounted installation, typically recessed into a standard electrical box. Follow these steps for proper setup:
1. تحضير الوحدة
Carefully remove the front cover of the emergency lamp to access the internal components. Connect the battery to the circuit board if it is not already connected. Ensure all connections are secure.
Image: The Beghelli 4340F emergency lamp with its front cover removed, revealing the internal battery and circuit board. This view is essential for initial setup and battery connection.
2. Mounting the Base
Install the black recessed box (not included, but shown in video as a typical installation method) into the wall according to standard electrical practices. Ensure the box is securely fastened and flush with the wall surface.
3. الأسلاك
Connect the mains power supply (230V~50Hz) to the terminals on the circuit board. Refer to the wiring diagram provided with the product for specific connections. Ensure correct polarity and secure all wires.
4. Assemble the Lamp
Once the wiring is complete and tested, carefully place the lamp's internal assembly (with the battery and circuit board) into the white casing. Then, secure the white casing into the recessed box. Finally, attach the front cover to the white casing, ensuring it clicks firmly into place.
Video: This video demonstrates the assembly process of the Beghelli emergency lamp, including connecting the battery, placing the internal components into the casing, and securing the unit into a recessed box.
Video: This video illustrates the final steps of installing the emergency lamp into a recessed wall box, showing how the unit fits securely and the cover is attached.
Video: This video provides another perspective on the installation of the Beghelli emergency lamp, demonstrating the secure placement of the lamp into its housing.
تعليمات التشغيل
The Beghelli 4340F emergency lamp operates automatically once properly installed and connected to the mains power supply.
- التشغيل العادي: When mains power is present, the lamp's internal battery will charge. The lamp سوف تبقى خارج.
- تجهيزات أو تحضيرات الإسعاف: في حالة انقطاع التيار الكهربائي، فإنamp will automatically switch on, providing 100 lumens of LED light from its built-in battery.
- مدة البطارية: لamp is designed to provide illumination for a specified duration during an emergency. Refer to the specifications for battery autonomy.
- الاختبار: It is recommended to periodically test the emergency lamp by temporarily cutting the mains power to ensure it functions correctly.
صيانة
تضمن الصيانة الدورية طول عمر وموثوقية جهاز الطوارئ الخاص بكamp.
- تنظيف: تنظيف الجزء الخارجي من lamp باستخدام قطعة قماش ناعمة وجافة. لا تستخدم المنظفات الكاشطة أو المذيبات.
- فحص البطارية: The built-in battery has a limited lifespan. If the lamp's emergency duration significantly decreases, the battery may need replacement. This should be done by a qualified technician.
- اختبار الوظيفة: Perform a monthly test by simulating a power outage to confirm the lamp activates and provides adequate light.
- التفتيش البصري: فحص دوري لamp لأي علامات تلف أو تآكل.
استكشاف الأخطاء وإصلاحها
If you encounter issues with your Beghelli 4340F emergency lamp، راجع المشكلات والحلول الشائعة التالية:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| Lamp does not turn on during power outage. | No mains power; Battery not charged; Battery faulty; Internal wiring issue. | Check mains power supply; Allow 24 hours for initial battery charge; Replace battery (qualified technician); Contact support. |
| Lamp يبقى مستمرا. | Mains power not connected; Faulty charging circuit. | Verify mains power connection; Contact support. |
| Reduced emergency lighting duration. | تدهور البطارية. | Replace battery (qualified technician). |
تحديد
| ميزة | التفاصيل |
|---|---|
| ماركة | Beghelli |
| نموذج | 4340 فهرنهايت |
| نوع المنتج | تركيبات الإضاءة |
| التدفق الضوئي | 100 لومن |
| نوع المصباح | قاد |
| مصدر الطاقة | Mains Powered (230V~50Hz) with Built-in Battery |
| نوع البطارية | Pb 4V 3Ah (as per product label) |
| Energy Consumption Class (EU) | 125 لومن/وات |
| مادة | بلاستيك |
| لون | أبيض |
| شكل | مستطيل |
| نوع التثبيت | تركيب على الحائط (مُدمج) |
| استخدامات محددة | في الهواء الطلق |
| شهادة | CE |
| وزن العنصر | 1 كجم |
الضمان والدعم
Beghelli products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official Beghelli webالموقع أو تواصل مع موزعك المحلي. احتفظ بإيصال الشراء كإثبات للشراء.
