1. المقدمة
Welcome and thank you for choosing the Tbest TL-136 Submersible Liquid Level Sensor. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your device. Please read this manual thoroughly before use to ensure proper functionality and to prevent potential damage or injury.
2. انتهى المنتجview والميزات
The Tbest TL-136 is a high-precision submersible liquid level transmitter designed for accurate and reliable water level monitoring in various industrial and commercial applications. Its robust construction and advanced technology ensure consistent performance in challenging environments.
- High-Precision Water Level Monitoring: Equipped with a high-precision diffusion silicon sensor for accurate water level measurements.
- إخراج مستقر: Features an advanced all-digital conditioning circuit with a stable 4-20mA output, providing consistent and dependable performance.
- حماية IP68: Built with IP68 multi-layer protection, making it suitable for use in harsh or wet environments, ensuring durability and longevity.
- Anti-Shock & Anti-Blocking Design: Designed with a 45-degree oblique angle for shock resistance and a detachable anti-blocking feature, preventing damage and ensuring smooth operation.
- Versatile Liquid Measurement: Suitable for measuring water and other non-corrosive liquids, making it ideal for a wide range of industrial and commercial applications.
لقطة مقرّبة view of the Tbest TL-136 submersible liquid level sensor, showing its stainless steel body, black cable, and exposed red and black wires.
3. معلومات السلامة
يرجى مراعاة احتياطات السلامة التالية لمنع الإصابة أو إتلاف الجهاز:
- تأكد من فصل الطاقة قبل التثبيت أو الصيانة.
- لا تتجاوز الحجم المحددtagه (24VDC).
- Avoid using the sensor with corrosive liquids unless explicitly stated as compatible.
- Handle the sensor and cable with care to prevent physical damage.
- Installation should be performed by qualified personnel in accordance with local electrical codes and safety standards.
4. المواصفات
| المعلمة | قيمة |
|---|---|
| إشارة الخرج | 4-20 مللي أمبير |
| مزود الطاقة | 24 فولت تيار مستمر |
| تصنيف الحماية | IP68 |
| نطاق القياس | 0-1 Meter (for this variant) |
| مادة | الفولاذ المقاوم للصدأ |
| أبعاد الحزمة | 9.49 × 9.37 × 1.89 بوصة |
| وزن العنصر | 1.06 رطل |
| الشركة المصنعة | أفضل |
An image highlighting the key features of the sensor, including IP68 multilayer waterproof protection, 45-degree bevel protection, removable anti-blocking design, and stable 4-20mA signal output.
5. الإعداد والتثبيت
5.1 فك التعبئة
Carefully remove the sensor from its packaging. Inspect the device and cable for any visible damage that may have occurred during transit. If any damage is found, do not proceed with installation and contact customer support.
5.2 مخطط الأسلاك
The Tbest TL-136 sensor is a 2-wire loop-powered device, operating on a 24VDC power supply and providing a 4-20mA current output. Connect the wires as follows:
- السلك الأحمر: Connect to the positive (+) terminal of the 24VDC power supply.
- السلك الأسود: Connect to the negative (-) terminal of the 24VDC power supply and the signal input of your receiving device (e.g., PLC, display). This wire serves as both power return and signal output.
Ensure proper polarity to prevent damage to the sensor or connected equipment. Refer to the documentation of your receiving device for its specific wiring requirements for 4-20mA inputs.
5.3 التثبيت المادي
The sensor is designed for submersible applications. Follow these steps for physical installation:
- Lower the sensor into the liquid to the desired measurement depth. Ensure the entire probe body, including the anti-blocking connector, is fully submerged.
- Securely route the cable to prevent abrasion, kinking, or damage from external factors. Use appropriate cable glands and strain relief.
- Avoid placing the sensor in areas with excessive turbulence, strong currents, or air bubbles, as these conditions can affect measurement accuracy.
- Ensure the sensor is mounted vertically for optimal performance.
A technical diagram illustrating the installation of the liquid level transmitter in a tank, showing the air guide cable and the probe body with its dimensions (108mm length, 28mm diameter) and anti-blocking connector.
6. تعليمات التشغيل
Once properly installed and powered, the Tbest TL-136 sensor will continuously measure the liquid level and output a corresponding 4-20mA current signal. This signal is proportional to the liquid level within the sensor's specified measurement range.
- 4mA Output: Corresponds to the minimum measured level (e.g., 0 meters).
- 20mA Output: Corresponds to the maximum measured level (e.g., 1 meter for this specific variant).
- Intermediate current values represent proportional liquid levels between the minimum and maximum range.
Connect the 4-20mA output to a compatible PLC, data logger, display unit, or other control system for real-time monitoring, data acquisition, or automated control based on the liquid level.
The Tbest TL-136 Submersible Liquid Level Sensor submerged in water, illustrating its operational environment.
7. الصيانة
Regular maintenance ensures optimal performance and extends the lifespan of your Tbest TL-136 sensor.
- تنظيف: Periodically inspect the sensor probe for any buildup of debris, sediment, or biological growth. Gently clean the probe with a soft brush and water if necessary. Avoid using abrasive materials or harsh chemicals.
- فحص الكابلات: Regularly check the sensor cable for any signs of wear, cuts, kinks, or other physical damage. Replace the cable or sensor if the cable insulation is compromised.
- فحص الاتصال: Ensure all electrical connections remain secure and free from corrosion. Loose or corroded connections can lead to inaccurate readings or intermittent operation.
- فحص المعايرة: If accuracy issues arise or after prolonged use, verify the sensor's output against known liquid levels. Recalibration may be required by a qualified technician if significant drift is observed.
8. استكشاف الأخطاء وإصلاحها
This section provides solutions to common issues you might encounter with your liquid level sensor.
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| No Output / Incorrect Output | No power, incorrect wiring, sensor damage, debris on sensor | Check 24VDC power supply, verify wiring polarity, inspect sensor for physical damage or debris, clean sensor if necessary. |
| Unstable Readings | Air bubbles, turbulence, electrical interference, sensor movement | Relocate sensor to a calmer area, ensure secure mounting, check for external electrical noise sources. |
| Output Stuck at 4mA | Sensor not submerged, open circuit in wiring, sensor fault | Ensure sensor is fully submerged, check wiring continuity, test sensor with a known good power supply. |
| Output Stuck at 20mA | Sensor fully submerged beyond range, short circuit in wiring, sensor fault | Verify liquid level is within the sensor's specified range, check for wiring shorts, test sensor. |
If problems persist after attempting these solutions, please contact Tbest customer support for further assistance.
9. الضمان والدعم
Tbest products are manufactured to high-quality standards and undergo rigorous testing. For specific warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or visit the official Tbest website. When contacting support, please have your model number (TL-136) and purchase details readily available to expedite assistance.
