Tbest Hexagonal Quick Release Plate for RC0 System Tripods

المنتج انتهىview

The Tbest Hexagonal Quick Release Plate (Model Tbest6in3vkeqr8) is a standard accessory designed for the RC0 hexagonal quick release system. It facilitates rapid attachment and detachment of cameras and other equipment to compatible tripods and mounts. This plate is equipped with a 1/4-inch screw for secure camera attachment and is compatible with various models including 3038, 3039, 3047, 3055, 3055S, and 3063, serving as a direct replacement for the #3049 plate.

المميزات الرئيسية:

• التوافق القياسي: Designed for the RC0 hexagonal quick release system.
• المرفق الآمن: Features a 1/4-inch camera screw for firm connection to camera base plates.
• كفاءة محسنة: Streamlines camera setup and removal processes.
• توافق الجهاز الواسع: Works with models 3038, 3039, 3047, 3055, 3055S, and 3063.
• الاستبدال المباشر: Functions as a replacement for the #3049 quick release plate.

Image: Note that new and old models of the quick release plate may be shipped randomly, as shown in the comparison. Both types are compatible with the RC0 system.

تعليمات الإعداد

1. قم بتثبيت لوحة التحرير السريع على الكاميرا:

   Locate the 1/4-inch screw on the quick release plate. Align this screw with the tripod mounting hole on the base of your camera. Rotate the screw clockwise until the plate is securely fastened to the camera. Ensure it is tight enough to prevent rotation but do not overtighten.

   

   الصورة: أعلى view of the Tbest Hexagonal Quick Release Plate, showing the 1/4-inch screw and textured rubber surface for secure camera attachment.

2. Attach Camera (with Plate) to Tripod/Mount:

   Ensure your tripod or mounting head is compatible with the RC0 hexagonal quick release system. Open the quick release clamp on your tripod head. Carefully insert the camera, with the attached quick release plate, into the clamp. أغلق clamp securely until you hear or feel a click, indicating the plate is locked in place. Verify the camera is stable before use.

   

   Image: A DSLR camera securely attached to a tripod head via the Tbest Hexagonal Quick Release Plate, demonstrating proper mounting.

Operating the Quick Release System

Inserting the Camera:

• Ensure the quick release lever on your tripod head is in the open position.
• Align the hexagonal quick release plate (attached to your camera) with the receiver on the tripod head.
• Gently push the plate into the receiver until it clicks into place.
• Push the quick release lever to the closed/locked position to secure the camera. Always double-check for stability.

Removing the Camera:

• While holding your camera firmly, push the quick release lever on the tripod head to the open position.
• Carefully lift the camera and attached quick release plate out of the receiver.

مقاطع فيديو توضيحية:

Video: A demonstration of attaching and detaching the quick release plate from a tripod head, showcasing the ease of use and secure locking mechanism.

Video: Another demonstration highlighting the quick release functionality and compatibility with the 3049 system.

صيانة

• تنظيف: Wipe the quick release plate with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive materials that could damage the finish or rubber grip.
• تقتيش: Regularly inspect the 1/4-inch screw for any signs of wear or damage. Ensure the rubber grip pad is intact and provides sufficient friction.
• تخزين: Store the quick release plate in a clean, dry environment when not in use to prevent corrosion or damage.

استكشاف الأخطاء وإصلاحها

Plate does not fit into tripod head:

• Ensure your tripod head is compatible with the RC0 hexagonal quick release system. This plate is specifically designed for that standard.
• Check if the quick release clamp on the tripod head is fully open.
• Inspect the plate and receiver for any obstructions or damage.

Camera feels loose after attachment:

• Tighten the 1/4-inch screw on the quick release plate to ensure it is firmly attached to your camera.
• Ensure the quick release lever on the tripod head is fully closed and locked.
• Verify that the rubber grip pad on the plate is clean and providing adequate friction.

مواصفات المنتج

Image: Diagram showing the dimensions of the Tbest Hexagonal Quick Release Plate (5cm/1.96in height, 7.5cm/2.95in width).

الضمان والدعم

For warranty information or technical support regarding your Tbest Hexagonal Quick Release Plate, please refer to the product packaging or contact Tbest customer service directly. Keep your purchase receipt for warranty claims.