الدليل+

Polibi Full Loft Bed with Desk and 2-Drawer Cabinet (B0BYNFGDYW)

Polibi Full Size Loft Bed with Desk and 2-Drawer Cabinet

Model: Full Loft Bed with Desk and 2-Drawer Cabinet (B0BYNFGDYW)

معلومات هامة حول السلامة

يرجى قراءة جميع التعليمات بعناية قبل التجميع والاستخدام. احتفظ بهذا الدليل للرجوع إليه مستقبلًا.

المنتج انتهىview والأبعاد

The Polibi Full Size Loft Bed provides an elevated sleeping area, an integrated desk, and a two-drawer cabinet, optimizing space in your room. Review the overall dimensions before assembly to ensure proper placement.

Diagram showing the Polibi Full Size Loft Bed with all dimensions labeled in inches.
الشكل 1: Overall dimensions of the Polibi Full Size Loft Bed. The bed measures 78.9 inches in length, 57 inches in width, and 69.3 inches in height. The integrated desk is 29.8 inches deep, and the separate two-shelf cabinet is 23.6 inches wide, 13.4 inches deep, and 27 inches high.

قائمة الأجزاء

Before beginning assembly, carefully unpack all components and identify each part using the list below. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

بزاوية view of the Polibi Full Size Loft Bed, showing the bed frame, integrated desk, and the separate two-shelf cabinet.
الشكل 2: Components of the loft bed, including the main frame, desk, and cabinet.
عن قرب view of the two-shelf cabinet, showing its construction and shelves.
الشكل 3: Detail of the two-shelf cabinet, which can be positioned under the desk.

قائمة الأجهزة

Ensure all hardware components are present before starting assembly. Use the provided Allen wrench for most fasteners.

تعليمات التجميع

Follow these steps carefully. Do not fully tighten bolts until instructed, or until the entire section is assembled.

  1. إعداد المنطقة: Clear a spacious area for assembly. Lay out all parts and hardware on a soft, clean surface to prevent scratches.
  2. Assemble Bed End Frames: Attach the short side rails to two bed posts using the appropriate bolts and barrel nuts. Repeat for the other end frame. Do not fully tighten yet.
  3. ربط القضبان الجانبية: Connect the two assembled end frames using the long side rails. Ensure the bed frame is square before gently tightening all bolts on the main bed frame.
  4. تركيب شرائح السرير: Place the bed slats evenly across the bed frame. Secure each slat to the side rails using the provided wood screws. Ensure slats are firmly attached to provide a stable mattress foundation.
    عن قرب view of the wooden bed slats installed on the loft bed frame.
    الشكل 4: Proper installation of bed slats for mattress support.
  5. قم بتركيب حواجز الأمان: Secure the guardrails to the upper bed frame using the designated bolts. Ensure they are firmly attached to prevent falls.
    عن قرب view of the guardrails on the loft bed, showing their attachment points.
    الشكل 5: Guardrails must be securely fastened for safety.
  6. Assemble and Install Desk: Attach the desk support rails to the bed posts at the desired height. Place the desk top onto the supports and secure it. Install the writing board/back panel behind the desk.
    عن قرب view of the writing board or back panel of the integrated desk.
    الشكل 6: The writing board provides a back panel for the desk area.
  7. مجلس الوزراء: Place the two-drawer cabinet under the desk area as desired. Ensure it is stable and does not obstruct movement.
  8. قم بتثبيت السلم: Securely attach the ladder to the designated side of the bed frame. Ensure all ladder steps are firmly in place and the ladder is stable.
    View of the integrated ladder and the desk area of the loft bed.
    الشكل 7: The ladder provides safe access to the loft bed.
  9. الشد النهائي: بعد وضع جميع المكونات في مكانها ومحاذاتها، قم بربط جميع البراغي والصواميل بإحكام تام. لا تفرط في الربط.
  10. التفتيش النهائي: Double-check all connections for tightness and stability. Ensure there are no loose parts or sharp edges.

تعليمات التشغيل

The Polibi Full Size Loft Bed is designed for versatile use, combining a sleeping area with a functional workspace and storage.

الصيانة والعناية

Proper care will extend the life and appearance of your Polibi Loft Bed.

استكشاف الأخطاء وإصلاحها

If you encounter issues with your loft bed, refer to these common solutions.

مواصفات المنتج

ماركةبولي
نموذجFull Loft Bed with Desk and 2-Drawer Cabinet
ASINB0BYNFGDYW
مقاسممتلىء
أبعاد المنتج78.9 بوصة طول × 57 بوصة عرض × 69.3 بوصة ارتفاع
مادةWood (Pinewood frame)
لونإسبرسو
ميزة خاصةFlexible, Sturdy, Built-in Desk, 2-Drawer Cabinet, Writing Board
مطلوب التجميعنعم
المرتبة متضمنةلا

معلومات الضمان

Polibi products are manufactured with quality and care. For specific warranty details regarding your Full Size Loft Bed, please refer to the warranty card included with your purchase or contact Polibi customer support. Keep your proof of purchase for any warranty claims.

دعم العملاء

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Polibi customer service. Have your product model number (B0BYNFGDYW) and purchase date ready when you call or email.

معلومات الاتصال: