PAC L.O.C. Pro Advanced Audio Integration T-Harness

1. المقدمة

The PAC L.O.C. Pro Advanced Audio Integration T-Harness (Model LPHGM51) is designed to simplify the integration of aftermarket audio equipment with your vehicle's factory radio system. This vehicle-specific T-harness provides all necessary high-level inputs and speaker outputs, allowing for the addition of aftermarket amplifiers or signal processors while retaining the original factory radio.

ملاحظة هامة: This product is specifically designed for OEM non-amplified systems and is not for use in vehicles with a factory ampالقمامة.

2. التوافق

The LPHGM51 T-Harness is compatible with select 2018 to 2023 non-amplified GM vehicles. Please verify your vehicle's compatibility before installation.

Compatible Vehicles (All Trim Levels, Non-Amplified Systems):

• بيوك: Envision 2017, LaCrosse 2016, Regal 2014-2015
• كاديلاك: ATS 2015-2016, CTS 2014-2015, Escalade 2015, SRX 2015-2016, XT5 2017
• شيفروليه: Camaro 2016-2018 (with 8-in. screen IO5/IO6), Colorado 2015-2016, Cruze 2016-2017, Impala Non-Classic 2014-2016 (with 8-in. screen IO5/IO6), Impala 2017-2019 (with 8-in. screen IO5/IO6), Malibu Non-Classic 2016, Malibu 2017-2018, Silverado 2014-2017, Silverado 2018 (with 8-in. screen IO5/IO6), Silverado Classic 2019 (with 8-in. screen IO5/IO6), Silverado HD 2015-2019, Sonic 2017, Spark 2015 and 2018

3. الإعداد والتثبيت

3.1 محتويات الصندوق

• PAC L.O.C. Pro Advanced Audio Integration T-Harness (LPHGM51)
• دليل المستخدم

3.2 اعتبارات ما قبل التثبيت

• السلامة أولاً: افصل دائمًا الطرف السالب لبطارية السيارة قبل البدء في أي تركيب كهربائي لمنع حدوث ماس كهربائي وتلف.
• يوصى بالتركيب الاحترافي: If you are not familiar with car audio wiring and vehicle disassembly, professional installation is highly recommended.
• الأدوات المطلوبة: Basic tools such as wire strippers, crimpers, electrical tape, zip ties, and a panel removal tool may be necessary.
• مصنع Amplifier Check: Confirm your vehicle does لا have a factory-installed amplifier. This harness is incompatible with ampأنظمة lified.

3.3 خطوات التثبيت

1. Access the Factory Radio: Carefully remove the necessary trim panels and components to gain access to the back of your vehicle's factory radio. Refer to your vehicle's service manual for specific instructions.
2. افصل تسخير المصنع: Locate and disconnect the main wiring harness from the back of the factory radio.
3. ربط تسخير T: Connect the male end of the LPHGM51 T-Harness to the factory radio. Then, connect the female end of the LPHGM51 T-Harness to the vehicle's factory wiring harness that was just disconnected.
4. Wire Aftermarket Equipment: The T-harness provides labeled wires for high-level audio outputs (e.g., front left speaker +, front left speaker -, etc.). Connect these wires to the corresponding inputs on your aftermarket amplifier or signal processor. Ensure all connections are secure and properly insulated.
5. التوصيل الآمن: Route and secure all wiring to prevent pinching, chafing, or interference. Use zip ties to keep cables tidy.
6. نظام اختبار: Before reassembling the dashboard, reconnect the vehicle's negative battery terminal and test the audio system to ensure proper functionality of both the factory radio and aftermarket components.
7. إعادة التجميع: Once confirmed working, carefully reassemble all removed trim panels and components.

الشكل 1: انتهىview of the PAC L.O.C. Pro Advanced Audio Integration T-Harness, showing the main connectors and individual speaker wire outputs.

الشكل 2: أقرب view of the PAC L.O.C. Pro T-Harness, illustrating the connection points for factory and aftermarket wiring.

4. تشغيل النظام

Once the PAC L.O.C. Pro Advanced Audio Integration T-Harness is correctly installed, its operation is seamless and integrated with your vehicle's existing audio system. The harness functions as an intermediary, providing high-level audio signals from your factory radio to your aftermarket audio components without altering the factory radio's functionality.

• Your factory radio will operate as normal, controlling volume, source selection, and tone.
• The audio signals are passed through the T-harness to your aftermarket amplifier or signal processor, which then processes and amplifies the sound for your aftermarket speakers.
• Adjustments to sound quality (e.g., bass, treble, balance, fader) will primarily be managed through your factory radio, while specific amplifier settings (gain, crossover) will be managed on the aftermarket equipment.

5. الصيانة

The PAC L.O.C. Pro Advanced Audio Integration T-Harness is designed for durable, long-term, and maintenance-free operation. No routine maintenance is required for the harness itself.

• سلامة الاتصال: Ensure all connections made during installation remain secure and free from moisture or physical damage. Loose connections can lead to intermittent audio or signal loss.
• فحص الأسلاك: If you experience any audio issues, a visual inspection of the wiring for signs of wear, fraying, or damage is recommended.
• حماية البيئة: Keep the harness and connected components away from excessive heat, moisture, and corrosive substances.

6. استكشاف الأخطاء وإصلاحها

If you encounter issues after installing the LPHGM51 T-Harness, refer to the following troubleshooting guide:

6.1 No Audio Output from Aftermarket System

• التحقق من الاتصالات: Verify that all connections between the T-harness, factory radio, vehicle harness, and aftermarket equipment are secure and correctly seated.
• Aftermarket Equipment Power: Ensure your aftermarket amplifier or signal processor is receiving power and is turned on. Check its power, ground, and remote turn-on connections.
• مصنع Ampمكبر: Double-check that your vehicle does not have a factory amplifier. This harness is not compatible with ampأنظمة lified.
• اختيار المصدر: Confirm the factory radio is set to an active audio source (e.g., radio, media player).

6.2 Distorted or Poor Audio Quality

• إعدادات الكسب: Adjust the gain settings on your aftermarket amplifier. Incorrect gain settings can lead to distortion.
• سلامة الأسلاك: Inspect all audio signal wires for shorts, breaks, or poor insulation. Ensure they are not running too close to power wires, which can cause interference.
• التأريض: Verify that the ground connection for your aftermarket equipment is solid and free of corrosion.

6.3 Intermittent Audio

• الاتصالات الفضفاضة: Re-check all harness and wiring connections for any looseness.
• الأسلاك التالفة: Inspect wiring for any signs of damage or intermittent contact.

7. المواصفات

8. معلومات الضمان

Specific warranty details for the PAC L.O.C. Pro Advanced Audio Integration T-Harness (LPHGM51) are not provided in this manual. For comprehensive warranty information, including terms, conditions, and duration, please refer to the official PAC Audio webالموقع أو تغليف المنتج.

9. دعم العملاء

For technical assistance, installation questions, or any other inquiries regarding your PAC L.O.C. Pro Advanced Audio Integration T-Harness, please contact PAC Audio customer support directly. You can typically find contact information and support resources on the official PAC Audio webموقع.

Webموقع: https://pac-audio.com/ (Please check for the most current URL)