1. المقدمة
This manual provides comprehensive instructions for the setup, operation, and maintenance of your iDPRT 320E Thermal Label Printer. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage. The iDPRT 320E is designed for efficient label printing in various environments, supporting multiple operating systems and connectivity options.
2. ماذا يوجد في الصندوق
تأكد من وجود جميع المكونات عند فك العبوة:
- iDPRT 320E Thermal Label Printer
- دليل التعليمات
- كابل بيانات USB
- محول الطاقة
- Sampلو تسميات
3. انتهى المنتجview
The iDPRT 320E Thermal Label Printer is a compact device designed for high-speed, high-resolution label printing. It features a simple design with essential ports for connectivity and an intuitive LED indicator for operational status.
الشكل 3.1: الجبهة view of the iDPRT 320E Thermal Label Printer with sampالعلامات التجارية.
المكونات الرئيسية:
- Label Exit Slot: حيث تظهر الملصقات المطبوعة.
- Cover Release Latches: Used to open the printer cover for label loading.
- منفذ الطاقة: يتصل بمحول الطاقة.
- منفذ USB: للاتصال المباشر بالكمبيوتر.
- منفذ LAN: للاتصال بالشبكة.
- مؤشر LED: يعرض حالة الطابعة.
4. تعليمات الإعداد
4.1 توصيل الطاقة
- Connect the power adapter to the printer's power port.
- قم بتوصيل محول الطاقة بمأخذ كهربائي مناسب.
4.2 تحميل الملصقات
The printer supports thermal labels with widths between 1 and 3.15 inches.
- Gently press the cover release latches on both sides of the printer to open the top cover.
- Place the roll of thermal labels into the label compartment, ensuring the labels feed from the bottom of the roll and the printable side faces upwards.
- Adjust the label guides to fit the width of your labels snugly, without creasinز لهم.
- Pull a few labels past the print head and out through the label exit slot.
- أغلق الغطاء العلوي بإحكام حتى يستقر في مكانه.
Figure 4.1: Correct method for loading thermal labels into the printer.
4.3 تثبيت برامج التشغيل والبرمجيات
To use the printer with your computer, you must install the appropriate drivers and the Label Designer software.
- قم بزيارة موقع iDPRT الرسمي website to download the latest drivers for your operating system (Windows, Mac, or Linux).
- Download and install the free Label Designer software from the official website. This software is available for Windows and as an online editor for Mac users.
- Follow the on-screen instructions to complete the installation process for both the drivers and the software.
Figure 4.2: The iDPRT 320E printer supports multiple operating systems.
4.4 خيارات الاتصال
The iDPRT 320E offers flexible connectivity:
- اتصال USB: Connect the printer directly to your computer using the provided USB cable.
- LAN Network Connection: Connect the printer to your local area network using an Ethernet cable for shared access.
- تطبيق الهاتف المحمول: For direct printing from your smartphone, download the iDPRT mobile application.
Figure 4.3: USB and LAN network connectivity options.
5. تعليمات التشغيل
5.1 Creating Labels with Label Designer Software
The Label Designer software allows you to create and customize various label types.
- Launch the Label Designer software on your computer.
- اختر قالبًا أو ابدأ تصميم ملصق جديد.
- Customize your labels with text, barcodes, QR codes, images, and various fonts. The software supports different label sizes and layouts.
- Ensure the label dimensions in the software match the physical labels loaded in the printer.
Figure 5.1: Designing labels using the Label Designer software.
5.2 طباعة الملصقات
Once your label design is complete and labels are loaded:
- In the Label Designer software, click the 'Print' button.
- Select the iDPRT 320E printer from the list of available printers.
- Adjust print settings such as quantity and print speed if necessary. The printer supports speeds up to 180mm/s and a resolution of 203 DPI.
- Confirm the settings and initiate printing.
Figure 5.2: The printer delivers high-quality 203 DPI resolution for clear labels.
Figure 5.3: The printer is capable of high-speed printing up to 180mm/s.
5.3 معاني مؤشرات LED
The LED indicator on the printer provides visual feedback on its status:
- أخضر (متصل): The printer is currently printing.
- Red (Solid On): The printer cover is not properly closed, or there is a paper jam/error.
- Blue (Solid On): الطابعة جاهزة للتشغيل.
6. الصيانة
6.1 تنظيف الطابعة
يساعد التنظيف المنتظم على الحفاظ على جودة الطباعة وإطالة عمر الطابعة.
- تأكد من إيقاف تشغيل الطابعة وفصلها عن التيار الكهربائي قبل التنظيف.
- استخدم قطعة قماش ناعمة وخالية من الوبر دampened with isopropyl alcohol to gently wipe the print head. Avoid touching the print head with bare hands.
- Clean the exterior of the printer with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Remove any dust or label debris from the label compartment.
7. استكشاف الأخطاء وإصلاحها
If you encounter issues with your iDPRT 320E printer, refer to the following common problems and solutions:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الطابعة لا تعمل | كابل الطاقة مفصول؛ مخرج الطاقة معطل | تحقق من توصيلات الطاقة؛ جرب منفذًا كهربائيًا مختلفًا. |
| الملصقات لا تتم طباعتها | Labels loaded incorrectly; Printer cover open; No drivers installed; Incorrect printer selected | Reload labels correctly; Close cover firmly; Install drivers; Select iDPRT 320E in print dialog. |
| Poor print quality (faded, blurry) | Print head dirty; Low-quality labels; Incorrect print density settings | Clean the print head; Use recommended thermal labels; Adjust print density in software settings. |
| Cannot connect via USB/LAN | Cable faulty; Driver issue; Network configuration problem | Try a different cable; Reinstall drivers; Verify network settings (for LAN). |
| Cannot connect via mobile app | App not installed; Printer not discoverable; Network issue | Ensure app is installed and updated; Check printer's network connection; Restart printer and app. |
| Mac Bluetooth connectivity issues | Direct Bluetooth printing to Mac is not supported; Driver limitations | Connect via USB or LAN for Mac systems. Mobile app connectivity is available for smartphones. |
8. المواصفات
Detailed technical specifications for the iDPRT 320E Thermal Label Printer:
| ميزة | مواصفة |
|---|---|
| اسم الموديل | 320E |
| تكنولوجيا الطباعة | حراري |
| أقصى سرعة للطباعة | 180 mm/s (Monochrome) |
| دقة الطباعة القصوى | 203 نقطة في البوصة |
| الحد الأقصى لحجم الوسائط | 1"-3.15" inches width |
| تكنولوجيا الاتصال | USB ، LAN |
| الأجهزة المتوافقة | PC (Windows, Mac, Linux), Mobile (iOS/Android via App) |
| طريقة التحكم | App, Software |
| أبعاد المنتج | 8.11 بوصة عمق × 6.1 بوصة عرض × 5.28 بوصة ارتفاع |
| وزن العنصر | 3.78 رطل |
| المميزات الخاصة | Automatic Label Recognition, LAN Network Connectivity |
9. الضمان والدعم
9.1 معلومات الضمان
The iDPRT 320E Thermal Label Printer comes with a limited warranty. Please refer to the warranty card included in your product packaging or visit the official iDPRT webموقع للحصول على الشروط والأحكام التفصيلية.
9.2 دعم العملاء
For technical assistance, troubleshooting, or any inquiries regarding your iDPRT 320E printer, please contact our customer service team. You can reach us via the Amazon messaging system or through the contact information provided on the official iDPRT website. Our team is available to assist you with any pre-sales or after-sales support needs.
