1. المقدمة
Thank you for choosing the SOFLOW SO2 Air 2nd Gen.E Electric Scooter. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your scooter. Please read it thoroughly before first use to ensure optimal performance and rider safety. This electric scooter is designed for personal transportation and features road approval, a powerful motor, and a foldable design for convenience.
Image: The SOFLOW SO2 Air 2nd Gen.E Electric Scooter in its fully assembled, unfolded state, ready for use. It showcases the sleek design and robust build.
2. معلومات السلامة
سلامتكم هي الأهم. التزموا دائمًا بالإرشادات التالية:
- احرص دائمًا على ارتداء خوذة ومعدات الحماية المناسبة (واقيات الركبة، واقيات المرفق) عند ركوب الدراجة.
- Familiarize yourself with local traffic laws and regulations regarding electric scooters. This model has road approval.
- Do not ride in heavy rain, on slippery surfaces, or in extreme weather conditions.
- حافظ على مسافة آمنة من المركبات الأخرى والمشاة.
- تجنب الركوب تحت تأثير الكحول أو المخدرات.
- تأكد من تثبيت جميع البراغي وآليات الفك السريع بشكل آمن قبل كل رحلة.
- The maximum weight capacity for this scooter is 100 kg. Do not exceed this limit.
- Use the front and rear brakes effectively to control your speed and stop safely.
الصورة: لقطة مقربة view of the strong front light of the SOFLOW SO2 Air 2nd Gen.E Electric Scooter, highlighting its importance for visibility and safety during low-light conditions.
3. محتويات العبوة
عند فتح العبوة، يرجى التأكد من تضمين جميع العناصر التالية:
- SOFLOW SO2 Air 2nd Gen.E Electric Scooter
- شاحن البطارية
- دليل المستخدم (هذا المستند)
إذا كان هناك أي عناصر مفقودة أو تالفة، يرجى الاتصال بدعم العملاء على الفور.
4. الإعداد والتجميع
The SOFLOW SO2 Air 2nd Gen.E Electric Scooter comes partially assembled. Follow these steps to prepare your scooter for its first ride:
- فتح السكوتر: Carefully lift the handlebar stem until it locks into the upright position. Ensure the folding mechanism is securely latched.
- تجميع المقود: Insert the handlebar into the stem and tighten any securing screws or clamps as indicated in the quick start guide (if provided separately). Ensure the handlebars are firm and do not wobble.
- التهمة الاولية: Before first use, fully charge the scooter's battery. Connect the charger to the charging port on the scooter and then to a power outlet. The charging indicator on the charger will change color (e.g., red to green) when fully charged. This typically takes up to 5 hours.
- فحص الإطارات: Verify that the 10-inch tires are properly inflated to the recommended pressure.
Image: The SOFLOW SO2 Air 2nd Gen.E Electric Scooter in its folded configuration, demonstrating its compact design for easy storage and transport.
5. تشغيل السكوتر
Once assembled and charged, you are ready to operate your SOFLOW SO2 Air 2nd Gen.E Electric Scooter:
- تشغيل/إيقاف التشغيل: Press and hold the power button on the handlebar to turn the scooter on or off.
- عرض: The integrated display shows important information such as speed, battery level, and riding mode. Familiarize yourself with the display indicators.
- Starting to Ride: Place one foot on the footboard and push off with the other foot to gain some initial momentum. Once moving, gently press the throttle lever to engage the motor.
- تسريع: Use the throttle lever to control your speed. Be mindful of your surroundings and accelerate smoothly.
- الكبح: The scooter is equipped with front and rear braking systems. Use the brake levers on the handlebars to slow down or stop. Apply both brakes gently and evenly for stable braking.
- أوضاع الركوب: Your scooter may have different riding modes (e.g., Eco, Standard, Sport). Refer to the display and controls to switch between modes for varying speeds and power consumption.
الصورة: تفصيلية view of the SOFLOW SO2 Air 2nd Gen.E Electric Scooter's handlebar, showcasing the integrated display, throttle, and brake levers for intuitive control.
Image: This image highlights the clear and readable display on the SOFLOW SO2 Air 2nd Gen.E Electric Scooter, providing essential ride information at a glance.
6. الصيانة
Regular maintenance ensures the longevity and safe operation of your scooter:
- العناية بالبطارية: Charge the 7.5 Ah lithium battery regularly, even if not in use, to maintain its health. Avoid completely draining the battery. Store the scooter in a cool, dry place.
- ضغط الإطارات: Check tire pressure periodically. Proper inflation is crucial for ride quality, range, and tire lifespan.
- فحص الفرامل: Regularly inspect brake levers, cables, and pads for wear and proper function. Adjust or replace components as needed.
- تنظيف: تنظيف السكوتر مع الإعلانamp لا تستخدم نفثات ماء عالية الضغط أو تغمر السكوتر في الماء.
- المثبتات: Periodically check all screws, bolts, and quick-release mechanisms to ensure they are tight and secure.
- تعليق: The dual suspension system requires minimal maintenance, but inspect for any visible damage or unusual noises.
Image: A close-up of the front wheel and dual suspension system of the SOFLOW SO2 Air 2nd Gen.E Electric Scooter, illustrating the robust design for a smooth ride.
7. استكشاف الأخطاء وإصلاحها
فيما يلي بعض المشكلات الشائعة وحلولها المحتملة:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| السكوتر لا يعمل | Low battery; Loose connection; Power button malfunction | Charge battery; Check all cable connections; Contact support |
| المحرك لا يعمل | Throttle issue; Brake engaged; Motor fault | Ensure throttle is pressed correctly; Check brake levers are fully released; Contact support |
| نطاق مخفض | Under-inflated tires; Battery degradation; Riding conditions (hills, heavy load) | Inflate tires to recommended pressure; Ensure full charge; Adjust riding style |
| الفرامل تشعر بالضعف | Worn brake pads; Loose brake cable | Inspect and replace brake pads; Adjust brake cable tension |
For issues not listed here or if solutions do not resolve the problem, please contact SOFLOW customer support.
8. المواصفات
Detailed technical specifications for the SOFLOW SO2 Air 2nd Gen.E Electric Scooter:
| ميزة | مواصفة |
|---|---|
| اسم الموديل | SO2 Air 2nd Gen.E |
| رقم الموديل | 300.420.02 |
| قوة المحرك | 350 W Hub Motor |
| نوع البطارية | 7.5 أمبير/ساعة ليثيوم أيون |
| أقصى مدى | ما يصل إلى 30 كم (18.6 ميلاً) |
| وقت الشحن | تصل إلى 5 ساعة |
| حجم العجلة | 10 بوصة |
| نظام الفرامل | الفرامل الأمامية والخلفية |
| تعليق | تعليق مزدوج |
| الحد الأقصى لسعة التحميل | 100 كيلوغرامًا (220 رطلاً) |
| الأبعاد (الطول × العرض × الارتفاع) | 113.8 x 50 x 119 cm (44.8 x 19.7 x 46.9 inches) |
| وزن | 17 كيلوغرام (37.5 رطل) |
| مادة الإطار | Metal / Aluminum |
| المميزات الخاصة | Foldable, Road Approved |
9. معلومات الضمان
The SOFLOW SO2 Air 2nd Gen.E Electric Scooter comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official SOFLOW website for detailed terms and conditions regarding coverage, duration, and claim procedures. Keep your proof of purchase for warranty claims.
10. دعم العملاء
For any questions, technical assistance, or service requests, please contact SOFLOW customer support. You can typically find contact information on the official SOFLOW website or on the packaging of your product. When contacting support, please have your scooter's model number (SO2 Air 2nd Gen.E or 300.420.02) and proof of purchase readily available.
