مقدمة
This manual provides detailed instructions for the setup, operation, and maintenance of your FIFINE K040 Wireless Microphone System. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
محتويات الحزمة
The FIFINE K040 Wireless Microphone System package includes the following items:
- 1 x Portable Metal Receiver
- 2 x Handheld Transmitters (Microphones)
- 1 x 1/4" Output Cable
- 1 × محول الطاقة
- 2 x Anti-rolling Silicone Rings
- زجاجان أماميان
- دليل المستخدم

المنتج انتهىview
المتلقي
The receiver unit manages the wireless connection and audio output.

ضوابط اللوحة الأمامية:
- زر الطاقة: تشغيل جهاز الاستقبال أو إيقاف تشغيله.
- VOL A Knob: Adjusts the volume for Microphone A.
- VOL B Knob: Adjusts the volume for Microphone B.
- شاشة LCD: Shows frequency, channel, and signal indicators for both microphones.
وصلات اللوحة الخلفية:
- مدخلات DC: قم بتوصيل محول الطاقة المرفق هنا.
- ANT-1 / ANT-2: Connect the antennas for signal reception.
- BALANCED-1 (XLR Output for Mic A): Professional audio output for Microphone A.
- BALANCED-2 (XLR Output for Mic B): Professional audio output for Microphone B.
- MIX OUT (1/4" Mix Output): Combined audio output for both microphones.
Handheld Microphones (Transmitters)
The system includes two handheld dynamic microphones.

- شاشة LCD: Displays current frequency and battery status.
- زر الطاقة: يقوم بتشغيل الميكروفون أو إيقافه.
- زر SET: Used to change frequencies.
- حجرة البطارية: Requires 2 x AA batteries (not included) for each microphone.
تعليمات الإعداد
- تركيب الهوائيات: Screw the two antennas onto the ANT-1 and ANT-2 connectors on the rear of the receiver. Ensure they are securely attached and positioned vertically for optimal signal reception.
- قم بتشغيل جهاز الاستقبال: Connect the power adapter to the DC INPUT on the receiver and plug it into a power outlet. Press the POWER button to turn on the receiver.
- تركيب البطاريات في الميكروفونات: Open the battery compartment of each handheld microphone and insert 2 x AA batteries, observing correct polarity.
- الاتصال بالنظام الصوتي:
- Using 1/4" Mix Output: Connect the provided 1/4" output cable from the MIX OUT port on the receiver to the input of your amplifier, mixer, or PA system. This combines the audio from both microphones into a single output.
- Using XLR Outputs: For separate control of each microphone, connect XLR cables (not included) from BALANCED-1 (Mic A) and BALANCED-2 (Mic B) to individual XLR inputs on your mixer.
- Connecting to TV (via Ampالمعمره): If connecting to a TV, ensure your TV's audio output is connected to an audio amplifier, and then connect the FIFINE K040 receiver to the amplifier as described above.

Image: Diagram showing the FIFINE K040 receiver connected to an amplifier using the 1/4" Mix Output cable. 
Image: Diagram illustrating the connection of the FIFINE K040 receiver to an audio mixer using XLR cables for individual microphone outputs. 
Image: Diagram showing how to connect the FIFINE K040 receiver to a TV through an audio ampمكبر. - تشغيل الميكروفونات: Press and hold the power button on each microphone until the LCD screen illuminates. The microphones should automatically pair with the receiver.
- ضبط مستوى الصوت: Use the VOL A and VOL B knobs on the receiver to set the desired output volume for each microphone.
تعليمات التشغيل
Ensure all components are properly connected and powered on before operation.
- استخدام الميكروفون: أمسك الميكروفون على بُعد حوالي 5-15 سم من فمك للحصول على أفضل جودة صوت. تجنب تغطية شبكة الميكروفون بيدك.
- التحكم في مستوى الصوت: Adjust the individual volume knobs (VOL A, VOL B) on the receiver to balance the audio levels of each microphone.
- Frequency Selection (If Interference Occurs):
- If you experience interference, you can change the operating frequency of the microphones.
- On the handheld microphone, press the تعيين button. The frequency on the LCD display will change.
- The receiver will automatically synchronize with the new frequency.
- The system offers 50 selectable UHF frequencies per channel to minimize interference.
- نطاق التشغيل: The system provides a line-of-sight range of up to 35 meters (115 feet). Obstacles and other wireless devices may reduce this range.


صيانة
- تنظيف: Wipe the receiver and microphones with a soft, dry cloth. Do not use liquid cleaners or solvents.
- استبدال البطارية: Replace AA batteries in the microphones when the battery indicator on the microphone's LCD screen shows low power. Always use fresh batteries.
- تخزين: عند عدم استخدام الميكروفونات لفترات طويلة، قم بإزالة البطاريات منها وتخزين النظام في مكان بارد وجاف.
- رعاية الهوائي: Handle antennas carefully to prevent bending or damage.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| لا يوجد صوت من الميكروفونات. |
|
|
| تداخل أو تشويش. |
|
|
| صوت ضعيف أو مشوه. |
|
|
تحديد
| ميزة | التفاصيل |
|---|---|
| نموذج | ك040 |
| نوع التردد | UHF (50 selectable frequencies per channel) |
| القنوات | 2 |
| نوع الميكروفون | Handheld Dynamic |
| النمط القطبي | أحادي الاتجاه |
| نطاق التشغيل | Up to 35m / 115ft (line of sight) |
| خرج جهاز الاستقبال | 1/4" Mix Output, 2 x XLR Balanced Outputs |
| طاقة الميكروفون | 2 x AA batteries (per mic) |
| قوة الاستقبال | محول طاقة التيار المستمر |
| مادة | معدن |
| إشارة إلى نسبة الضوضاء | 70 ديسيبل |
| مقاومة | 600 أوم |
| وزن العنصر | 1 كيلوغرام (للنظام بأكمله) |
| أبعاد المنتج | 35 × 27 × 5 سم |

الضمان والدعم
For warranty information and technical support, please refer to the warranty card included with your product or visit the official FIFINE webالموقع. احتفظ بإيصال الشراء الخاص بك كإثبات للشراء في حالة مطالبات الضمان.
الشركة المصنعة: تقنية فاين
المستورد (الهند): Origin Marketing Pvt Ltd - 9870294946





