TYAN B7126T65V10E4HR Thunder SX TS65-B7126 Storage Server User Manual

1. المقدمة

This manual provides comprehensive instructions for the installation, operation, and maintenance of the TYAN B7126T65V10E4HR Thunder SX TS65-B7126 Storage Server. Please read this manual thoroughly before operating the server to ensure proper functionality and to prevent damage.

2. معلومات السلامة

اتبع احتياطات السلامة التالية لمنع الإصابة والتلف للمعدات:

• افصل الطاقة دائمًا قبل إجراء أي عملية تركيب أو صيانة.
• تأكد من التأريض المناسب لمنع حدوث صدمة كهربائية.
• Operate the server in a well-ventilated environment to prevent overheating.
• Do not expose the server to moisture or extreme temperatures.
• Only qualified personnel should perform service or repairs.

3. محتويات العبوة

تأكد من وجود جميع العناصر في العبوة:

• TYAN B7126T65V10E4HR Thunder SX TS65-B7126 Storage Server Unit
• سلك (أسلاك) الطاقة
• Accessory Kit (screws, cables, etc.)
• Quick Installation Guide (this manual serves as the detailed guide)

4. انتهى المنتجview

The TYAN Thunder SX TS65-B7126 is a high-performance storage server designed for demanding data center environments. It features extensive storage capabilities and flexible expansion options.

الشكل 4.1: الجبهة view of the TYAN B7126T65V10E4HR Thunder SX TS65-B7126 Storage Server, showing drive bays and front panel controls.

المميزات الرئيسية:

• ذاكرة: 16 DIMM slots supporting DDR4 3200 memory.
• Front Storage: 12 x 3.5" SATA hot-swap, tool-less drive bays, with optional support for 4 NVMe U.2 drives.
• Rear Storage: 2 x 2.5" SATA hot-swap, tool-less drive bays.
• الشبكات: PCIe 3.0 x16 OCP v2.0 LAN mezzanine slot (Type 1).
• التخزين الداخلي: 1 x NVMe/PCIe 3.0 x2 M.2 2280 slot.

5. الإعداد

5.1 تركيب الرف

The server is designed for standard 19-inch rack mounting. Secure the server using appropriate rack rails and screws (typically included in the accessory kit) to ensure stability and proper airflow.

5.2 تركيب محرك الأقراص

1. 3.5" SATA/NVMe Drives: Open the drive bay latch, slide the drive into the bay until it clicks into place. For NVMe U.2 drives, ensure the correct backplane configuration is in place.
2. 2.5" SATA Rear Drives: Locate the rear 2.5" drive bays. Slide the drives into the bays until secured.
3. M.2 NVMe Drive: Install the M.2 drive into the dedicated M.2 2280 slot on the motherboard, securing it with the provided screw.

5.3 تركيب الذاكرة

Install DDR4 3200 DIMMs into the 16 available slots. Refer to the motherboard manual for specific memory population rules to optimize performance.

5.4 توصيل الطاقة

Connect the power cord(s) to the server's power supply unit(s) and then to a grounded power outlet or PDU. Ensure all power connections are secure.

5.5 التمهيد الأولي

Press the power button on the front panel. Monitor the boot process and access the BIOS/UEFI setup as needed to configure boot devices, RAID arrays, and other system settings.

6. تعليمات التشغيل

6.1 تثبيت نظام التشغيل

Install your preferred operating system (e.g., Windows Server, Linux distribution) using a bootable USB drive or network installation. Ensure all necessary drivers are installed for optimal hardware performance.

6.2 تكوين التخزين

Configure your storage drives. For SATA drives, you may use the onboard RAID controller or a separate HBA. For NVMe drives, ensure the operating system has the appropriate drivers. Create logical volumes or file systems as required for your application.

6.3 تكوين الشبكة

Configure the network interfaces, including the OCP v2.0 LAN mezzanine card, with appropriate IP addresses, subnet masks, and gateway settings for your network environment.

7. الصيانة

7.1 التنظيف

Regularly clean the server's exterior and ensure air vents are free from dust accumulation. Use compressed air to clear dust from internal components, ensuring power is disconnected first.

7.2 تحديثات البرامج الثابتة

التحقق بشكل دوري من الشركة المصنعة website for updated BIOS/UEFI, BMC, and RAID controller firmware. Apply updates as recommended to improve stability, performance, and security.

7.3 استبدال محرك الأقراص

The server features hot-swap drive bays. For failed drives, identify the faulty unit, unmount it from the operating system (if applicable), and carefully remove it. Insert a new, compatible drive, ensuring it seats correctly.

8. استكشاف الأخطاء وإصلاحها

8.1 لا يوجد طاقة

• Check power cord connections to the server and power outlet.
• Verify the power supply unit (PSU) status indicators.
• تأكد من أن منفذ الطاقة يعمل بشكل صحيح.

8.2 النظام لا يعمل

• Check memory modules are properly seated.
• Verify boot device order in BIOS/UEFI.
• Listen for POST (Power-On Self-Test) beep codes and consult the motherboard manual for their meaning.

8.3 لم يتم اكتشاف محرك الأقراص

• Ensure the drive is fully seated in its bay.
• تحقق من مؤشرات حالة محرك الأقراص.
• Verify cabling for non-hot-swap drives.
• Check BIOS/UEFI or RAID controller settings for drive detection.

9. المواصفات

10. الضمان والدعم

For warranty information and technical support, please refer to the official TYAN webقم بزيارة الموقع أو اتصل بالبائع المعتمد لديك. احتفظ بإثبات الشراء لتقديم مطالبات الضمان.

الموارد المتاحة على الإنترنت: Visit the TYAN official website for the latest drivers, firmware, and additional documentation.