Gearlux SP184 18 LED 10 Watt RGBW PAR Stagدليل المستخدم الخفيف

1. المقدمة

This manual provides essential information for the safe and efficient operation of your Gearlux SP184 18 LED 10 Watt RGBW PAR Stage Light. Please read this manual thoroughly before installation and use, and retain it for future reference.

2. معلومات السلامة

• تأكد من حجم امدادات الطاقةtage يطابق المجلد المحددtagالبريد على الجهاز.
• Always disconnect the power before cleaning or servicing the unit.
• لا تقم بتشغيل الجهاز إذا كان سلك الطاقة تالفًا.
• تجنب تعرض العين المباشر لمصدر الضوء.
• This device is for indoor use only. Protect it from moisture and extreme temperatures.
• تأكد من وجود تهوية كافية حول الوحدة لمنع ارتفاع درجة الحرارة.

3. انتهى المنتجview

3.1 الميزات الرئيسية

• Quad-Color LEDs: Equipped with 18x10-watt RGBW (Red, Green, Blue, White) LEDs for versatile color mixing and high output.
• التبريد الفعال: Features a quiet cooling fan for effective heat dissipation, contributing to a longer product lifespan.
• RDM Functionality: Supports RDM (Remote Device Management) via 8 DMX channels for simplified configuration and control.
• تركيب مرن: Includes an adjustable metal handle/bracket for easy installation on walls, trusses, or for ground placement.

3.2 مكونات

Familiarize yourself with the main components of the Gearlux SP184 PAR light:

الشكل 1: أمام view of the Gearlux SP184 PAR Stage Light, showing the 18 RGBW LED lenses.

الشكل 2: مؤخرة view of the control panel, featuring DMX In/Out, Power In/Out, digital display, and control buttons.

• LED Array: 18 individual 10-watt RGBW LEDs on the front panel.
• لوحة التحكم: Located on the rear, includes a digital display and four control buttons (MENU, UP, DOWN, ENTER).
• اتصالات دمكس: XLR 3-pin DMX In and DMX Out ports for linking with DMX controllers and other fixtures.
• توصيلات الطاقة: Power In and Power Out ports for daisy-chaining power to multiple units. Includes a fuse holder.
• شريحة متزايدة: An adjustable metal bracket for secure positioning.

4. الإعداد والتثبيت

4.1 فك التعبئة

Carefully remove the fixture from its packaging. Inspect the unit for any signs of damage during transit. Retain the packaging for future transport or storage.

4.2 التركيب

The Gearlux SP184 can be mounted in various positions using its adjustable bracket:

• التركيب الأرضي: Place the unit on a stable, level surface. Adjust the bracket to direct the light as desired.
• جدار جبل: Securely attach the bracket to a sturdy wall using appropriate hardware (not included). Ensure the mounting surface can support the weight of the fixture.
• Truss Mount: Attach the bracket to a lighting truss using a suitable clamp (not included). Always use a safety cable when mounting overhead.

الشكل 3: جانب view illustrating the adjustable mounting bracket and knob for angle adjustment.

4.3 توصيل الطاقة

Connect the provided power cable to the "Power In" port on the rear of the unit and then to a suitable power outlet (AC 100-240V, 50/60Hz). Multiple units can be daisy-chained using the "Power Out" port, but ensure the total current draw does not exceed the circuit's capacity.

الشكل 4: Detail of the Power In port with a connected power cable.

4.4 اتصال DMX

For DMX control, connect a DMX cable from your DMX controller's output to the "DMX In" port of the first fixture. For multiple fixtures, connect the "DMX Out" of the first fixture to the "DMX In" of the next, and so on. Use a DMX terminator on the last fixture in the chain for optimal signal integrity.

5. تعليمات التشغيل

5.1 التنقل في لوحة التحكم

The digital display and four buttons on the rear panel allow you to navigate menus and select operating modes:

• MENU: يتنقل بين خيارات القائمة الرئيسية.
• فوق تحت: Navigates through sub-menu options or adjusts parameter values.
• أدخل: Confirms a selection or saves a setting.

أوضاع التشغيل 5.2

The Gearlux SP184 typically offers several operating modes:

• وضع DMX: Allows external control via a DMX controller. Set the DMX address for the fixture. The unit uses 8 DMX channels.
• نظام آلي: The fixture runs through pre-programmed light shows automatically.
• وضع الصوت النشط: The light reacts to sound detected by its built-in microphone.
• الوضع الرئيسي / العبد: Link multiple units where one acts as the master (controlling) and others as slaves (following).
• وضع اللون الثابت: Select and display a single static color (Red, Green, Blue, White, or mixed colors).

الشكل 5: The PAR light displaying a white output, demonstrating its RGBW capabilities.

الشكل 6: The PAR light displaying a pink/magenta output, showcasing color mixing.

الشكل 7: The PAR light displaying a green output.

5.3 RDM Function

The RDM (Remote Device Management) function allows for two-way communication between the DMX controller and the fixture. This enables remote setting of DMX addresses, mode changes, and monitoring of fixture status directly from an RDM-compatible DMX controller, simplifying setup and troubleshooting.

6. الصيانة

6.1 التنظيف

To maintain optimal light output and cooling efficiency, regularly clean the fixture's lenses and cooling vents. Use a soft, lint-free cloth and a mild glass cleaner for the lenses. Ensure the unit is powered off and disconnected before cleaning.

6.2 استبدال الصمامات

If the unit does not power on, check the fuse located near the power input. Disconnect power, unscrew the fuse holder, and replace the fuse with one of the same type and rating (e.g., T2A 250V). Never use a fuse with a higher rating.

6.3 التخزين

When not in use, store the fixture in its original packaging or a suitable case in a dry, dust-free environment.

7. استكشاف الأخطاء وإصلاحها

8. المواصفات

9. الضمان والدعم

للحصول على معلومات الضمان أو الدعم الفني، يرجى الرجوع إلى الوثائق المرفقة وقت الشراء أو الاتصال بالبائع. احتفظ بإثبات الشراء لتقديم أي مطالبات ضمان.