مقدمة
This manual provides detailed instructions for the safe and correct installation and operation of your PERLESMITH TV Wall Mounts, including the PSMTK1 Tilting Mount and the PSMFK7 Full Motion Mount. Please read all instructions carefully before beginning installation to ensure proper setup and to prevent damage or injury.
معلومات هامة حول السلامة
تحذير: Failure to read and follow all instructions can result in personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer support.
- Do not install on drywall alone. The mount must be secured to a single wood stud, solid concrete, or brick wall.
- تأكد من أن هيكل الجدار قادر على تحمل الوزن الإجمالي للحامل وجهاز التلفزيون بشكل آمن.
- استعن دائمًا بمساعد لرفع التلفزيون ووضعه في مكانه.
- لا تتجاوز الحد الأقصى لوزن الحمولة المحدد لكل طراز حامل.
- افحص جميع الوصلات والمثبتات بشكل دوري للتأكد من بقائها آمنة.
محتويات الحزمة
Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact PERLESMITH customer service.
PSMFK7 Full Motion TV Wall Mount Components
Image: The PSMFK7 full motion TV wall mount, showing the articulating arm, TV plate, wall plate, and small accessories like cable ties and a bubble level.
- Full Motion Wall Plate Assembly
- حوامل التلفزيون (x2)
- مجموعة أدوات التثبيت (مسامير متنوعة، مثبتات، غسالات)
- مستوى الفقاعة
- روابط الكابلات
PSMTK1 Tilting TV Wall Mount Components
Image: The PSMTK1 tilting TV wall mount, showing the wall plate, TV brackets, and small accessories like cable ties and a bubble level.
- Tilting Wall Plate
- حوامل التلفزيون (x2)
- مجموعة أدوات التثبيت (مسامير متنوعة، مثبتات، غسالات)
- مستوى الفقاعة
- روابط الكابلات
الإعداد والتثبيت
1. فحوصات ما قبل التثبيت
- تحقق من توافق التلفزيون:
For PSMFK7: Fits most 26"-55" TVs up to 70 lbs (31.8 kg) with VESA patterns from 100x100mm to 400x400mm.
For PSMTK1: Fits most 23"-60" TVs up to 115 lbs (52 kg) with VESA patterns from 75x75mm to 400x400mm.
Image: Visual guide for PSMFK7 compatibility, indicating TV size range, weight capacity, and VESA mounting patterns.
- تحديد نوع الجدار: This mount is designed for installation on single wood studs, solid concrete, or brick walls. لا تقم بالتثبيت على الحوائط الجافة وحدها.
- Check for Cable Blockage: Ensure the TV's power and input ports will not be blocked by the mounting brackets.
2. Attaching TV Brackets to TV
- ضع جهاز التلفزيون الخاص بك بعناية ووجهه لأسفل على سطح ناعم ونظيف.
- Select the correct screws, washers, and spacers from the hardware kit that fit your TV's VESA mounting holes.
- Attach the two TV brackets to the back of your TV using the selected hardware. Ensure the brackets are level and securely fastened.
3. تركيب لوحة الحائط
- Determine the desired height for your TV. Mark the drilling locations on the wall.
- لتركيب الدعامات الخشبية: Use a stud finder to locate the center of a wood stud. Drill pilot holes (e.g., 7/32" or 5.5mm) at the marked locations. Secure the wall plate using lag bolts and washers.
- لتركيب الجدران الخرسانية/الطوبية: Drill pilot holes (e.g., 3/8" or 10mm) at the marked locations. Insert concrete anchors into the holes. Secure the wall plate using lag bolts and washers.
- Use the included bubble level to ensure the wall plate is perfectly horizontal before tightening all fasteners.
4. Mounting TV to Wall Plate
- بمساعدة شخص آخر، ارفع التلفاز بحرص باستخدام الأقواس المرفقة.
- Hook the TV brackets onto the wall plate. Ensure the TV is securely seated on the mount.
- For PSMFK7: Secure the TV to the mount using the safety screws or locking mechanisms provided.
- For PSMTK1: Engage the locking mechanism with the quick release pull-down straps to secure the TV.
Image: Simplified installation steps for the PSMTK1 mount, illustrating how the TV brackets hook onto the wall plate and the use of the pull cord for locking and releasing.
تشغيل حامل التلفزيون الخاص بك
PSMFK7 Full Motion Mount Adjustments
Image: Demonstrates the PSMFK7 mount's flexibility, including tilting down 15 degrees, extending up to 19.17 inches, swiveling 180 degrees, and leveling +/-3 degrees.
- تعديل الميل: The mount features a +5°/-15° tilt range. Loosen the tilt knobs on the TV brackets, adjust the TV to the desired angle, and then tighten the knobs to secure.
- تعديل الدوران: The articulating arm allows for a +/-90° swivel. Gently push or pull the TV to the desired viewزاوية جي.
- التمديد/الانكماش: Extend the TV up to 19.17 inches (48.7 cm) from the wall for optimal viewing or retract it back to 3.2 inches (8.1 cm) for a low-profile ينظر.
- ضبط التسوية: After installation, you can make a +/-3° leveling adjustment to ensure the TV is perfectly horizontal.
PSMTK1 Tilting Mount Adjustments
- تعديل الميل: The PSMTK1 allows for a downward tilt. Loosen the tilt bolts on the side of the TV brackets, adjust the TV to the desired angle, and then tighten the bolts.
- آلية القفل: Use the pull-down straps to engage or disengage the quick-release locking mechanism, securing the TV to the wall plate.
صيانة
- قم بفحص جميع البراغي والصواميل بشكل دوري للتأكد من أنها محكمة وآمنة.
- نظّف الحامل بقطعة قماش ناعمة وجافة. تجنّب استخدام المنظفات أو المذيبات الكاشطة.
- Ensure no cables are pinched or stressed by the mount's movement.
استكشاف الأخطاء وإصلاحها
- التلفزيون ليس مستويا: Use the leveling adjustment feature (PSMFK7) or re-adjust the tilt bolts (PSMTK1) and ensure the wall plate was installed level.
- جبل يشعر فضفاضة: Re-check all wall plate and TV bracket fasteners. Ensure they are tightened securely. If installed on a wood stud, confirm the lag bolts are fully engaged in the stud. If on concrete, ensure anchors are properly seated.
- Difficulty moving full motion mount: Check for any obstructions. Ensure all pivot points are free of debris. If the movement is too stiff or too loose, some joints may have adjustable tension screws (refer to specific model diagrams if available).
- اجزاء مفقودة: Do not proceed with installation. Contact PERLESMITH customer support for replacement parts.
تحديد
| ميزة | حامل إمالة PSMTK1 | PSMFK7 Full Motion Mount |
|---|---|---|
| توافق حجم التلفزيون | 23" - 60" | 26" - 55" |
| سعة الوزن | 115 رطل (52 كجم) | 70 رطل (31.8 كجم) |
| التوافق مع VESA | 75x75mm إلى 400x400mm | 100x100mm إلى 400x400mm |
| نوع الحركة | إمالة | Swivel, Tilt, Extension |
| زاوية الميل | Adjustable downward tilt | +5° / -15° |
| زاوية الدوران | غير متاح | +/-90 درجة |
| تعديل التسوية | غير متاح | +/-3 درجة |
| امتداد من الجدار | لو بروfile | من 3.2 بوصة إلى 19.17 بوصة (من 8.1 سم إلى 48.7 سم) |
| مادة | سبائك الفولاذ | |
| لون | أسود | |
| نوع التركيب | حامل الحائط | |
معلومات الضمان
PERLESMITH products are manufactured with quality and care. For specific warranty details, please refer to the warranty card included with your product or visit the official PERLESMITH webالموقع. احتفظ بإيصال الشراء كإثبات للشراء.
دعم العملاء
If you have any questions, require assistance with installation, or need replacement parts, please contact PERLESMITH customer support. Our team is available to help you.
- Webموقع: www.perlesmith.com (Hypothetical link, please replace with actual if available)
- بريد إلكتروني: support@perlesmith.com (Hypothetical email, please replace with actual if available)
- هاتف: 1-800-XXX-XXXX (Hypothetical number, please replace with actual if available)
