VIVO MOUNT-E-M070R-W Motorized TV Wall Mount Instruction Manual

مقدمة

This manual provides detailed instructions for the safe and proper installation and operation of your VIVO MOUNT-E-M070R-W Motorized TV Wall Mount. Please read all instructions carefully before assembly and use. Keep this manual for future reference.

معلومات هامة حول السلامة

تحذير: Failure to understand and follow these instructions may result in serious personal injury, product damage, or property damage. Ensure all components are securely attached to the wall and TV. If you have any questions, please contact VIVO customer support.

• Do not install into drywall alone. The mount must be secured into a wood stud, concrete, or brick walls only.
• تأكد من أن سطح التثبيت يمكنه تحمل الوزن الإجمالي للمعدات وجميع الأجهزة المرفقة بشكل آمن.
• لا تتجاوز الحد الأقصى للوزن وهو 77 رطلاً (35 كجم).
• Use only the provided mounting hardware.
• Always use a stud finder to locate studs accurately before drilling.

مميزات المنتج

• Motorized Mantel TV Mount: Designed for placement above fireplaces, fitting 37” to 70” screens weighing up to 77 lbs.
• التوافق مع VESA: Supports VESA patterns 200x100, 200x200, 300x200, 300x300, 400x200, 400x300, 400x400, or 600x400mm.
• Ergonomic Screen Placement: Reduces neck, back, and eye strain by adjusting TV height.
• نطاق التمديد: Extends your screen 7" to 20.3" from the wall surface.
• المحرك الكهربائي: Smooth, powerful motor for ideal viewing height with a 101° pull angle and height range up to 23”.
• بناء فولاذي قوي: Durable and scratch-resistant, holding up to 77 lbs.
• جهاز التحكم عن بعد: Operates the mount from up to 100 ft away.
• إدارة الكابلات: Integrated clips help keep cables organized and out of sight.

Figure 1: Key dimensions and features of the VIVO Motorized TV Wall Mount.

Figure 2: The mount's extension range from the wall surface.

Figure 3: The mount supports screens up to 77 lbs.

Figure 4: Compatible TV screen sizes for the mount.

الإعداد والتثبيت

Proper installation is crucial for the safety and performance of your TV mount. Follow these steps carefully.

اعتبارات التثبيت على الحائط

• The mount must be directly centered between studs. Studs must be equidistant from the center for the mount to be centered.
• Minimum stud spacing: 7.8 inches. Maximum stud spacing: 16 inches.

Figure 5: Wall stud spacing requirements for proper mount installation.

تخليص المانتل

Ensure adequate clearance above your fireplace mantel. Deeper mantels require higher mounting heights to clear the mantel in the down position.

Figure 6: Mantel depth and corresponding minimum mounting height requirements.

خطوات التثبيت

1. تحديد أماكن حفر الثقوب: Use a stud finder to locate the desired mounting position on the wall. Mark the locations using the provided stencil. Predrill the marked locations.


Figure 7: Marking drill points on the wall.

2. Drill Holes & Mount to Wall: Drill the pilot holes. Secure the mount to the wall using appropriate hardware for wood studs, concrete, or brick.

Figure 8: Drilling holes and securing the mount to the wall.
3. تركيب لوحة التلفزيون: Remove pre-installed nuts and washers from the mount. Attach the TV plate to the mount using the removed nuts and washers. Press the front cover onto the TV plate.


Figure 9: Attaching the TV plate to the mount.

4. Mount TV & Secure: Carefully lift the TV and hang it onto the TV plate. Flip open the clips on the VESA brackets and reinstall the nuts to secure the TV.


Figure 10: Mounting the TV and securing it with clips.

فيديو التثبيت

تعليمات التشغيل

Your motorized TV mount is operated using the included remote control.

وظائف التحكم عن بعد

الشكل 11: تخطيط جهاز التحكم عن بعد ووظائف الأزرار.

• استخدم Up و تحت arrow buttons to adjust the TV's height.
• اضغط على OK button to stop the movement at any desired position.
• The remote allows for a 101° pull angle and a height range of up to 23 inches.
• The mount also features swivel capabilities of +25° to -25° and screen leveling of +3° to -3°.

إدارة الكابلات

Utilize the integrated cable clips to keep all wires organized and prevent them from interfering with the mount's movement.

Figure 12: Cable management clips on the mount arm.

صيانة

تضمن الصيانة المنتظمة طول عمر حامل التلفزيون الخاص بك وتشغيله بشكل آمن.

• قم بفحص جميع البراغي والوصلات بشكل دوري للتأكد من أنها محكمة وآمنة.
• نظّف الحامل بقطعة قماش ناعمة وجافة. تجنّب استخدام المنظفات أو المذيبات الكاشطة.
• Ensure cables are not pinched or obstructing the motorized movement.

استكشاف الأخطاء وإصلاحها

If you encounter issues with your motorized TV mount, refer to the following common solutions:

• Mount not moving: Check if the power cord is securely plugged into both the mount and the wall outlet. Ensure the remote control batteries are functional.
• Intermittent movement: Verify that no cables are caught or obstructing the moving parts of the mount.
• جهاز التحكم عن بعد لا يستجيب: Replace the remote control batteries. Ensure there are no obstructions between the remote and the mount's receiver.
• التلفزيون غير مستوٍ: Use the screen leveling adjustment feature if available, or consult the full manual for specific leveling instructions.

لمزيد من المساعدة، يرجى الاتصال بدعم عملاء VIVO.

تحديد

الضمان والدعم

VIVO products are designed for quality and durability. For warranty information, technical support, or to report missing/damaged parts, please contact VIVO directly. Our U.S.-based support team is available to assist you.

معلومات الاتصال: Refer to the VIVO webقم بزيارة الموقع أو عبوة المنتج الخاص بك للحصول على تفاصيل الاتصال الحالية.