ORTUR Laser Master 3 User Manual

1. المقدمة

The ORTUR Laser Master 3 is a high-performance laser engraver and cutter designed for precision work on various materials such as wood and metal. Featuring a 10000mW laser module and an engraving speed of up to 20000mm/min, this device offers advanced capabilities for both hobbyists and professionals. It supports multiple control methods, including app control, and incorporates several safety features to ensure secure operation.

Image 1.1: The ORTUR Laser Master 3 laser engraver, showcasing its design and an example of a detailed engraving on a wooden surface. Various engraved items like mugs, tumblers, and wooden crafts are also displayed.

2. معلومات السلامة

Operating a Class 4 laser device requires strict adherence to safety protocols. Failure to follow these guidelines can result in serious injury or damage to property.

2.1 احتياطات السلامة العامة

• Always wear appropriate laser safety goggles during operation. The laser emits invisible radiation that can cause permanent eye damage.
• Ensure the work area is well-ventilated to dissipate fumes and smoke produced during engraving or cutting.
• لا تترك الماكينة أبدًا دون مراقبة أثناء تشغيلها.
• Keep a fire extinguisher nearby. Certain materials can ignite during laser processing.
• احتفظ بالأطفال والحيوانات الأليفة بعيدًا عن منطقة التشغيل.
• Do not engrave or cut reflective materials without proper precautions, as reflected laser beams can be hazardous.
• Ensure the emergency stop switch is easily accessible and understood by all users.

2.2 أنظمة السلامة المتكاملة

The ORTUR Laser Master 3 is equipped with 7 safety protection systems:

1. قفل الأمان: Requires a key for professional use, preventing unauthorized operation.
2. حماية الوضع النشط: Stops operation if the machine is moved or tilted unexpectedly.
3. حماية الوضع المائل: Detects and halts operation if the machine's angle changes significantly.
4. الكشف عن مدة التعرض والحد منها: يمنع التعرض المطول لليزر في نقطة واحدة.
5. المجلدtagنظام التحكم في السلامة الحالي والكهربائي: Monitors electrical parameters for safe operation.
6. برنامج مراقبة الحاسوب المضيف: Ensures continuous communication and control from the host device.
7. مفتاح إيقاف الطوارئ: Immediately cuts power to the laser in case of an emergency.

Image 2.1: Diagram illustrating the ORTUR Laser Master 3's seven safety protection systems, including mobile location protection, buzzer alarm, stable framework, exposure detection, security lock, and power control system.

3. الإعداد

3.1 فك العبوة والتفتيش

قم بفك جميع المكونات من العبوة بعناية. تأكد من وجود جميع الأجزاء المذكورة في قائمة التعبئة وأنها سليمة. أبلغ خدمة العملاء فوراً عن أي أجزاء مفقودة أو تالفة.

3.2 التجميع

The ORTUR Laser Master 3 requires some assembly. Follow the detailed instructions provided in the separate assembly guide. Key steps include:

• Attaching the frame components securely.
• Installing the laser module onto the gantry.
• Connecting all necessary cables, ensuring they are properly routed and secured to prevent interference with movement.
• Tensioning the drive belts correctly to ensure smooth and accurate movement of the laser module.

3.3 تثبيت البرنامج والاتصال

The Laser Master 3 supports various software and connection methods:

• برامج سطح المكتب: Compatible with LaserGRBL and LightBurn. Install the chosen software on your Windows (XP/7/8/10) or Mac system.
• تطبيق الهاتف المحمول: Use the professional 'Laser Explorer' app, compatible with iPhone, Android phones, iPad, and Android tablets.
• طرق الاتصال:
• USB: Connect the machine directly to your computer via USB cable.
• واي فاي: For app control, ensure your device is connected to a 2.4GHz Wi-Fi network. Press the machine's button 5 times quickly (within 2 seconds) to enter discovery mode for Wi-Fi pairing.
• بطاقة TF: For offline operation, save your NC files to a TF card and insert it into the machine.

Image 3.1: The ORTUR Laser Master 3 demonstrating compatibility with various systems and file formats, showing connections to a laptop running LightBurn and a smartphone using the Laser Explorer app.

4. تعليمات التشغيل

4.1 التشغيل والتهيئة

• قم بتوصيل محول الطاقة بالجهاز ومأخذ الطاقة المناسب.
• Turn on the main power switch. The machine will perform a self-check and home the laser module to its starting position.

4.2 إعداد المواد

• Place the material to be engraved or cut securely on the work surface. Ensure it is flat and stable.
• For optimal results, use the included rubber mat or a dedicated engraving platform.
• Avoid materials that produce toxic fumes when laser processed, such as certain plastics or circuit boards.

4.3 تركيز الليزر

The ORTUR Laser Master 3 features a foldable focal gauge for easy focusing. Adjust the laser module's height until the focal gauge touches the material surface, then retract the gauge.

4.4 Starting an Engraving/Cutting Job

• Using Software (LaserGRBL/LightBurn): قم بتحميل التصميم الخاص بك file (NC, BMP, JPG, PNG, DXF, etc.), set parameters (power, speed, passes), and send the job to the machine.
• Using App (Laser Explorer): Select your design, choose material settings, and initiate the job directly from your mobile device. The app provides an automatic operation guide for novice users.
• باستخدام بطاقة تف: Ensure your NC file is on the TF card. Insert the card, and the machine will automatically detect and begin the job. You can disconnect your computer or phone after the job starts.

Image 4.1: A visual guide demonstrating the process of connecting the ORTUR Laser Master 3 to a computer or phone, importing a DXF cutting file, and completing the artwork.

4.5 عملية المراقبة

Always monitor the engraving or cutting process. Be prepared to use the emergency stop switch if any issues arise, such as smoke, flames, or unexpected machine behavior.

Image 4.2: A comparison showing the ORTUR Laser Master 3 completing an engraving in 30 minutes at 20000mm/min, while another laser at 10000mm/min has not finished the same task in the same timeframe.

5. الصيانة

Regular maintenance ensures the longevity and optimal performance of your ORTUR Laser Master 3.

5.1 Cleaning the Laser Module

Periodically clean the laser lens and the air assist nozzle. Use a soft, lint-free cloth and appropriate lens cleaning solution. Ensure the machine is powered off and disconnected before cleaning.

الصورة 5.1: لقطة مقربة view of the ORTUR laser module, highlighting its dual fan cooling system for efficient heat dissipation and stable long-term operation.

5.2 Cleaning Rails and Belts

Dust and debris can accumulate on the guide rails and drive belts, affecting movement accuracy. Clean these components regularly with a dry cloth. Inspect belts for wear and tear and ensure they maintain proper tension.

5.3 تحديثات البرامج الثابتة

تحقق من أورتور الرسمي website or app for available firmware updates. Keeping your machine's firmware up-to-date can improve performance, add new features, and resolve potential issues.

6. استكشاف الأخطاء وإصلاحها

This section addresses common issues you might encounter with your ORTUR Laser Master 3.

6.1 مشاكل الاتصال

• فشل الاتصال بشبكة الواي فاي: Ensure your router is broadcasting a 2.4GHz network. Confirm you are pressing the machine's button 5 times rapidly to enter Wi-Fi discovery mode.
• لم يتم اكتشاف اتصال USB: Verify the USB cable is securely connected to both the machine and your computer. Ensure necessary drivers are installed. Try a different USB port or cable.

6.2 Movement Problems (e.g., Y-axis not moving)

• فحص الكابلات: Inspect all motor cables for secure connections and any signs of damage.
• فحص الأحزمة: Ensure the drive belts are properly tensioned and not slipping. Check for any obstructions on the rails.
• Firmware Reset: If movement issues persist, try performing a factory reset and re-downloading the latest firmware as per the official instructions.

6.3 جودة النقش/القطع رديئة

• ركز: Re-check the laser focus using the focal gauge. Incorrect focus is a common cause of poor quality.
• Material Settings: Adjust power, speed, and number of passes in your software based on the material type and desired effect. Refer to material test guides.
• عدسة نظيفة: A dirty laser lens can significantly reduce laser power and quality. Clean the lens as described in the Maintenance section.

7. المواصفات

8. معلومات الضمان

The ORTUR Laser Master 3 comes with a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Ortur website for detailed terms and conditions regarding coverage, duration, and claims procedures. Keep your proof of purchase for warranty service.

9. الدعم

For further assistance, technical support, or inquiries, please utilize the following resources:

• رسمي Webموقع: Visit the Ortur official website for FAQs, software downloads, and additional documentation.
• دعم البريد الإلكتروني: Contact Ortur customer service via email for detailed inquiries.
• الدردشة المباشرة: Access live chat support on the Ortur webالموقع خلال ساعات العمل.
• Community Forums/Social Media: Engage with the Ortur community on platforms like Facebook for tips, tricks, and peer support.

دعم البريد الإلكتروني

الدردشة المباشرة

فيسبوك