دليل تعليمات جهاز النقش بالليزر SCULPFUN S10

1. المقدمة

The SCULPFUN S10 Laser Engraver is a high-performance laser cutting and engraving machine designed for precision work on various materials, including wood and metal. It features a 10W optical power laser, an industrial-grade X-axis linear slide rail, and an air assist nozzle for enhanced cutting and engraving capabilities.

Figure 1: The SCULPFUN S10 Laser Engraver with various engraved and cut samples, showcasinج- تنوعها.

2. معلومات السلامة

WARNING: Laser radiation can cause eye injury and skin burns. Always wear appropriate laser safety goggles and ensure the protective cover is installed during operation. Never look directly into the laser beam.

• لا تقم بتشغيل الجهاز دون مراقبة.
• Ensure proper ventilation in the work area to dissipate fumes.
• Keep children under 14 years old away from the product. Children over 14 require adult supervision.
• Avoid strong impacts on the machine.
• Do not use the laser directly on specular reflection objects, as this may cause injury or damage the laser.
• Always place an A4 steel pad or similar protective material under the workpiece to protect your table from laser damage.

Figure 2: The adjustable laser eye shield provides protection during operation. Always wear additional safety goggles.

3. محتويات العبوة

تأكد من وجود جميع المكونات وعدم تلفها عند فتح العلبة:

Figure 3: All components included in the SCULPFUN S10 package. Ensure all parts are accounted for before assembly.

• SCULPFUN S10 Laser Engraver Frame
• وحدة ليزر 10 واط
• Air Assist Nozzle and Tube
• محول الطاقة
• كابل يو اس بي
• نظارات السلامة من الليزر
• A4 Steel Pad
• أدوات التجميع والمسامير
• Sample Wood Pieces
• دليل المستخدم (هذا المستند)

4. الإعداد

Follow these steps to assemble and prepare your SCULPFUN S10 Laser Engraver for first use:

1. تجميع الاطار: Assemble the aluminum frame components according to the included pictorial instructions. Ensure all screws are tightened securely.
2. تركيب وحدة الليزر: Carefully attach the 10W laser module to the X-axis gantry. Connect the necessary cables.
3. Air Assist Setup: Connect the air assist tube to the laser module's nozzle. If using an external air compressor (sold separately), connect it to the air assist tube.
4. Power and USB Connection: Connect the power adapter to the machine and a power outlet. Connect the USB cable from the machine to your computer.
5. تثبيت البرنامج: Install compatible laser engraving software such as LaserGRBL (for Windows) or LightBurn (for Windows and MAC). Refer to the software's documentation for detailed installation and setup.
6. ضبط التركيز: Adjust the laser focus according to the instructions in your software or the laser module's specific guide. Proper focus is crucial for optimal engraving and cutting results.

5. التشغيل

Operating the SCULPFUN S10 involves preparing your design, setting parameters, and initiating the engraving or cutting process.

5.1. إعداد المواد

• Place the material securely on the working area. Use clamps if necessary to prevent movement.
• Ensure the A4 steel pad is positioned underneath the material to protect the surface below.
• Verify the laser focus is correctly set for the material thickness.

5.2. تشغيل البرمجيات

1. Open your chosen laser software (e.g., LightBurn, LaserGRBL).
2. Import or create your design.
3. Configure laser parameters (power, speed, passes) based on the material type and desired outcome. Refer to the software's material settings guide for recommended values.
4. قبلview the job to ensure correct placement and scale.
5. Initiate the engraving/cutting process. Monitor the machine closely during operation.

Figure 4: Illustration of the 10W optical power laser with air assist, demonstrating its cutting capabilities on 3mm and 6mm plywood in a single pass. The air assist helps in achieving cleaner cuts by removing residue.

Figure 5: Comparison showing the cleaner cutting edge and lack of smoke stains achieved by the SCULPFUN S10 with air assist, compared to other lasers without it.

5.3. Key Features for Operation

• High Density 10W Laser Power: The S10's 10W laser provides strong cutting penetration and engraving capabilities, allowing it to cut high-density woods like MDF and walnut more easily.
• Industrial-grade Engraving Accuracy: Equipped with a high-precision anti-shake linear X-axis slide rail, the S10 minimizes wave line marks, resulting in more accurate engravings.
• Powerful High-Speed Air Assist: The advanced fluid mechanics design of the air assist nozzle can spray high-speed airflow up to 14.5m/s, significantly improving cutting efficiency and quality when connected to a compatible air compressor (30L/min 0.03Mpa recommended, purchased separately).

6. الصيانة

تضمن الصيانة المنتظمة طول العمر والأداء الأمثل لجهاز النقش بالليزر الخاص بك.

• تنظيف عدسة الليزر: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain beam clarity and power.
• تشحيم الأجزاء المتحركة: Apply a small amount of lubricant to the linear slide rails and belts as recommended in the detailed product manual to ensure smooth movement.
• التحقق من الاتصالات الفضفاضة: قم بفحص جميع التوصيلات الكهربائية والميكانيكية بانتظام للتأكد من أنها آمنة.
• إزالة الحطام: Remove any accumulated dust, debris, or material scraps from the machine's working area and internal components.

7. استكشاف الأخطاء وإصلاحها

القضايا المشتركة وحلولها المحتملة:

8. المواصفات

9. الضمان والدعم

SCULPFUN provides a ضمان لمدة 12 شهرًا for the S10 Laser Engraver. For any questions, technical assistance, or warranty claims, please contact SCULPFUN customer support directly. Refer to the contact information provided in your product packaging or on the official SCULPFUN webموقع.

For detailed machine instructions and parameter settings, always refer to the comprehensive manual provided with your product.