دليل مستخدم الدراجة الكهربائية Nilox E-Bike X8 Plus

1. المقدمة

Thank you for choosing the Nilox E-Bike X8 Plus. This electric bicycle is designed for both urban commuting and light off-road use, offering pedal assistance, a robust design, and convenient features. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your e-bike. Please read it thoroughly before your first ride and keep it for future reference.

Image 1.1: The Nilox E-Bike X8 Plus, showcasing its foldable frame and fat tires.

2. معلومات السلامة

Your safety is paramount. Always wear a helmet and appropriate safety gear when riding. Adhere to local traffic laws and regulations. Before each ride, perform a safety check:

• تأكد من أن الإطارات منفوخة بشكل صحيح.
• Check that both front and rear brakes are functioning correctly.
• Verify that all quick releases and fasteners are securely tightened.
• Confirm that the battery is securely installed and charged.
• Test the lights and horn.

Warning: Do not operate the e-bike if any component is damaged or not functioning correctly. Consult a qualified technician for repairs.

3. محتويات العبوة

عند تفريغ العبوة، يرجى التأكد من تضمين جميع العناصر التالية:

• Nilox E-Bike X8 Plus (partially assembled)
• دليل المستخدم (هذا المستند)
• Assembly Kit (basic tools for initial setup)
• شاحن البطارية
• Removable Lithium-ion Battery (pre-installed or separate)

إذا كان هناك أي عناصر مفقودة أو تالفة، يرجى الاتصال بدعم العملاء على الفور.

4. الإعداد والتجميع الأولي

Your Nilox E-Bike X8 Plus comes partially assembled. Follow these steps to complete the setup:

1. فك التعبئة: أخرج الدراجة الكهربائية وجميع مكوناتها من العبوة بعناية. احتفظ بالعبوة لاستخدامها في النقل أو الإرجاع مستقبلاً.
2. تتكشف الإطار: Locate the main folding hinge on the frame. Release the safety latch and unfold the frame until it locks into place. Secure the quick-release lever.


Image 4.1: Detail of the frame's folding hinge and quick-release lever.

3. تجميع المقود: Insert the handlebar stem into the fork tube. Adjust the height to a comfortable position and tighten the quick-release lever and any bolts securely. Ensure the handlebar is aligned with the front wheel.
4. تركيب الدواسة: Identify the left (L) and right (R) pedals. The left pedal tightens counter-clockwise, and the right pedal tightens clockwise. Apply a small amount of grease to the threads and screw them firmly into the crank arms using the provided wrench.


Image 4.2: Standard pedal for the e-bike.

5. تركيب عمود المقعد: Insert the seat post into the frame's seat tube. Adjust the height for comfortable pedaling (your leg should have a slight bend at the knee when the pedal is at its lowest point). Secure the quick-release lever.
6. تركيب/فحص البطارية: Ensure the removable battery is correctly inserted into its compartment and locked. Refer to the 'Battery Information' section for details on charging.

Image 4.3: The removable lithium-ion battery pack, located on the frame.
7. فحص ما قبل الركوب: Before your first ride, double-check all connections, bolts, and quick releases. Ensure brakes are functional and tires are inflated to the recommended pressure.

5. مكونات أكثرview

Familiarize yourself with the main components of your Nilox E-Bike X8 Plus:

• إطار: Foldable steel alloy frame.
• المحرك: 36V - 250W Brushless High Speed motor.
• بطارية: Removable 36V - 13Ah Lithium-ion battery.
• العجلات: 20-inch FAT tires for enhanced stability and grip.
• الفرامل: فرامل قرصية أمامية وخلفية لضمان قوة توقف موثوقة.
• نظام التروس: Shimano 7-speed mechanical gear system.
• عرض: LCD digital display on the handlebar showing speed, battery level, and pedal assist mode.

Image 5.1: The LCD digital display, providing ride information.
• أضواء: Integrated LED front light and rear light.
• Fenders & Rack: Front and rear fenders, and a rear luggage rack.


Image 5.2: Rear wheel assembly with Shimano 7-speed derailleur and integrated luggage rack.

6. تعليمات التشغيل

To operate your Nilox E-Bike X8 Plus:

1. تشغيل الطاقة: Press and hold the power button on the LCD display to turn on the e-bike system. The display will illuminate.
2. Pedal Assist Modes: Use the '+' and '-' buttons on the display to select one of the 5 pedal assist modes. Mode 1 provides the least assistance, while Mode 5 provides the most.
3. يركب: Begin pedaling. The motor will engage automatically based on the selected pedal assist mode. The motor provides assistance only when you are pedaling.
4. التروس: Use the Shimano 7-speed shifter to change gears according to terrain and desired speed. Lower gears are for climbing, higher gears for flat terrain and speed.
5. الكبح: Apply both front and rear disc brakes smoothly and evenly to slow down or stop.
6. أضواء: The integrated LED lights can be turned on/off via a button on the display or handlebar control.
7. إيقاف التشغيل: Press and hold the power button on the LCD display to turn off the e-bike system when you are finished riding.

7. معلومات البطارية

The Nilox E-Bike X8 Plus is equipped with a removable 36V - 13Ah Lithium-ion battery, offering an assisted range of up to 70 km under optimal conditions.

7.1 شحن البطارية

1. Ensure the e-bike is turned off.
2. The battery can be charged while installed on the bike or removed. To remove, unlock the battery with the key and slide it out.
3. قم بتوصيل الشاحن بمنفذ شحن البطارية.
4. Plug the charger into a standard electrical outlet. The charger's indicator light will show charging status (typically red for charging, green for fully charged).
5. Charging time typically ranges from 4-6 hours for a full charge. Do not overcharge.
6. Once fully charged, disconnect the charger from the outlet and then from the battery.

7.2 العناية بالبطارية والسلامة

• قم بتخزين البطارية في مكان بارد وجاف، بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى.
• Avoid completely draining the battery. Recharge it regularly, even if the bike is not in use for extended periods (e.g., once every 1-2 months).
• استخدم فقط الشاحن الأصلي المرفق مع دراجتك الكهربائية.
• لا تعرض البطارية للماء أو الرطوبة.
• If the battery is damaged or shows signs of overheating, discontinue use immediately and contact customer support.

8. الصيانة

تضمن الصيانة المنتظمة طول عمر وتشغيل دراجتك الإلكترونية بشكل آمن.

8.1 التنظيف العام

نظف دراجتك الإلكترونية بانتظام باستخدام الإعلانamp cloth and mild soap. Avoid using high-pressure washers directly on electrical components, bearings, or the motor.

8.2 العناية بالإطارات

Check tire pressure before each ride. The recommended pressure is usually indicated on the tire sidewall. Inspect tires for wear, cuts, or embedded objects.

نظام الفرامل 8.3

Regularly check brake pads for wear and replace them when necessary. Ensure brake levers have proper tension and that the disc rotors are clean and free of oil or grease.

8.4 Chain and Gears

Keep the chain clean and lubricated. Periodically check the gear system for smooth operation and adjust if shifting becomes imprecise.

8.5 مثبتات

Periodically check all bolts, nuts, and quick releases for tightness. Loose fasteners can lead to unsafe riding conditions.

9. استكشاف الأخطاء وإصلاحها

This section addresses common issues you might encounter with your Nilox E-Bike X8 Plus.

For issues not listed here or if solutions do not resolve the problem, please contact Nilox customer support.

10. المواصفات

11. الضمان والدعم

Nilox products are covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and product. Please refer to the warranty card included with your purchase or visit the official Nilox webموقع للحصول على معلومات الضمان التفصيلية.

11.1 دعم العملاء

If you have any questions, require technical assistance, or need to report a problem with your Nilox E-Bike X8 Plus, please contact Nilox customer support. Contact details can typically be found on the Nilox webيمكنك الاطلاع على المعلومات المتوفرة في الموقع أو في الوثائق المرفقة مع منتجك.

When contacting support, please have your product model (X8 Plus) and purchase information readily available.