دليل مستخدم الدراجة الكهربائية القابلة للطي Nilox J1 PRO

مقدمة

This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your Nilox J1 PRO Folding Electric Bicycle. Please read this manual thoroughly before using your e-bike and retain it for future reference.

The Nilox J1 PRO combines the convenience of a folding bicycle with the power of an electric motor, offering an eco-friendly and dynamic urban commuting solution.

الصورة: الجانب view of the Nilox J1 PRO folding electric bicycle, showcasinيتميز بتصميمه الذي يتضمن سلة أمامية ورف خلفي.

محتويات الحزمة

عند فتح العبوة، يرجى التأكد من وجود جميع العناصر وأنها غير تالفة:

• Nilox J1 PRO eBike (90% assembled)
• دليل المستخدم
• Assembly Kit (tools for final assembly)
• شاحن البطارية

الإعداد والتجميع الأولي

Your Nilox J1 PRO eBike is delivered approximately 90% assembled. The following steps detail the completion of the assembly process.

1. Unfolding the Bicycle

Carefully remove the e-bike from its packaging. Locate the main folding hinge on the frame. Release the safety latch and unfold the frame until it locks into place. Secure the latch firmly.

الصورة: عن قرب view of the e-bike's folding mechanism, showing the hinge and latch system on the frame.

2. Handlebar and Seatpost Adjustment

Adjust the handlebar stem and seatpost to your preferred riding height. Ensure all quick-release levers are securely tightened after adjustment. The handlebar stem also features a folding mechanism; ensure it is locked in the upright position.

3. تركيب الدواسة

Identify the left (L) and right (R) pedals. The left pedal typically has a reverse thread. Apply a small amount of grease to the threads and carefully screw each pedal into its respective crank arm. Tighten them firmly with a wrench from the assembly kit.

4. تركيب البطارية والشحن الأولي

The battery is usually located on the rear rack. Ensure it is securely seated and locked into position. Before first use, fully charge the battery using the provided charger. Connect the charger to the battery port and then to a standard electrical outlet. The charging indicator on the charger will show the charging status.

الصورة: مفصلة view of the rear section of the e-bike, highlighting the rear wheel, electric motor hub, and the battery mounted on the rear rack.

5. فحوصات ما قبل الركوب

Before your first ride, perform the following checks:

• الإطارات: تأكد من نفخ الإطارات إلى الضغط الموصى به (تحقق من الجدار الجانبي).
• الفرامل: اختبر الفرامل الأمامية والخلفية للتأكد من عملها واستجابتها بشكل صحيح.
• أضواء: Verify that the front and rear LED lights are working.
• إصدارات سريعة: Confirm all quick-release levers (seatpost, handlebar) are securely fastened.
• التروس: If applicable, check that the 6-speed gear system shifts smoothly.

تعليمات التشغيل

The Nilox J1 PRO is designed for intuitive operation. Familiarize yourself with the controls before riding.

1. تشغيل / إيقاف التشغيل

To power on the e-bike's electrical system, press and hold the ON/OFF button on the handlebar control unit. Repeat to power off.

2. نظام المساعدة بالدواسة (PAS)

The e-bike features a pedal-assist system. Once powered on, begin pedaling, and the motor will provide assistance. Use the MODE button on the handlebar control unit to select different levels of assistance (Low, Medium, High). Higher assist levels provide more power and speed but consume battery faster.

Image: Close-up of the handlebar-mounted control unit, showing the ON/OFF button, light control, and pedal assist level indicators (Low, Med, High).

3. الأضواء

Press the LIGHT button on the control unit to turn the front and rear LED lights on or off for improved visibility.

4. تغيير التروس

The Nilox J1 PRO is equipped with a 6-speed gear change system. Use the gear shifter on the handlebar to select appropriate gears for different terrains and speeds. Shift smoothly to avoid strain on the drivetrain.

5. الكبح

The e-bike uses V-brakes. Apply both front and rear brakes gently and evenly to slow down or stop. Avoid sudden, hard braking, especially with the front brake, to prevent loss of control.

6. قابل للطي للتخزين/النقل

To fold the e-bike, ensure it is powered off. Release the safety latch on the main frame hinge and fold the frame. Fold the handlebar stem down and collapse the pedals if they are foldable. This compacts the bike for easy storage or transport.

صيانة

Regular maintenance ensures the longevity and safe operation of your Nilox J1 PRO eBike.

• العناية بالبطارية:
  • قم بشحن البطارية بانتظام، حتى لو لم تكن قيد الاستخدام، للحفاظ على صحتها.
  • تجنب تفريغ البطارية بالكامل.
  • قم بتخزين البطارية في مكان بارد وجاف، بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى.
• ضغط الإطارات: Check tire pressure weekly and inflate to the recommended PSI (found on the tire sidewall).
• الفرامل: Inspect brake pads for wear and replace them when necessary. Ensure brake cables are free from fraying and properly adjusted.
• سلسلة: حافظ على نظافة السلسلة وتزييتها لضمان سلاسة تغيير التروس ومنع التآكل.
• المثبتات: قم بفحص جميع البراغي والصواميل وأذرع التحرير السريع بشكل دوري للتأكد من إحكامها.
• تنظيف: نظف الدراجة الكهربائية بالإعلانamp القماش. تجنب استخدام غسالات الضغط العالي مباشرة على المكونات الكهربائية.

استكشاف الأخطاء وإصلاحها

This section addresses common issues you might encounter with your Nilox J1 PRO eBike.

If you encounter issues not listed here or cannot resolve a problem, please contact Nilox customer support.

تحديد

Key technical specifications for the Nilox J1 PRO Folding Electric Bicycle:

الضمان والدعم

For warranty information, please refer to the documentation included with your purchase or visit the official Nilox webالموقع. احتفظ بإثبات الشراء الخاص بك لتقديم مطالبات الضمان.

If you require technical assistance or have questions regarding your Nilox J1 PRO eBike, please contact Nilox customer support through their official channels. Contact details can typically be found on the Nilox webالموقع أو في عبوة المنتج.