دليل مستخدم اللوحة الأم ASRock Z690 Phantom Gaming-ITX/TB4

مقدمة

This manual provides detailed instructions for the installation, operation, and maintenance of your ASRock Z690 Phantom Gaming-ITX/TB4 motherboard. Designed for 12th Gen Intel Core Processors, this Mini ITX motherboard offers advanced features and connectivity for high-performance computing.

ماذا يوجد في الصندوق

• دليل التثبيت السريع
• دعم القرص المضغوط
• 2 × كابلات بيانات ساتا
• 1 x ASRock WiFi 2.4/5/6 GHz Antenna
• 2 x Screws for M.2 Sockets

الميزات الرئيسية

• Supports 12th Gen Intel Core Processors (LGA1700)
• 11 Phase SPS Dr.MOS Power Design
• Supports DDR5 6400MHz (OC)
• 1 PCIe 5.0 x16 Slot
• Graphics Output Options: HDMI, DisplayPort, Thunderbolt™ Type-C
• Realtek ALC1220 7.1 CH HD Audio Codec, Nahimic Audio
• 3 SATA3 Ports
• 1 Hyper M.2 (PCIe Gen4 x4) Slot
• 1 Hyper M.2 (PCIe Gen4 x4 & SATA3) Slot
• Thunderbolt™ 4/USB4 Type-C Port
• 1 USB 3.2 Gen2x2 Front Type-C Port
• 4 Rear USB 3.2 Gen2 Type-A Ports
• 3 USB 3.2 Gen1 (1 Rear, 2 Front) Ports
• Killer E3100 2.5G LAN
• Killer AX1675 802.11ax (WiFi 6E) + Bluetooth

يثبت

1. CPU Installation (LGA 1700)

Carefully align your 12th Gen Intel Core Processor with the LGA 1700 socket. Ensure the triangular markers on the CPU and socket match. Gently lower the CPU into the socket without applying force. Close the load plate and secure the retention arm.

الصورة: من أعلى إلى أسفل view of the ASRock Z690 Phantom Gaming-ITX/TB4 motherboard, highlighting the LGA 1700 CPU socket.

2. تركيب ذاكرة الوصول العشوائي (DDR5)

Insert DDR5 memory modules into the DIMM slots. Ensure the module's notch aligns with the slot's key. Press down firmly on both ends of the memory module until the retention clips snap into place. This motherboard supports DDR5 up to 6400MHz (OC).

3. تركيب وحدات التخزين (M.2 وSATA)

This motherboard features two Hyper M.2 slots (PCIe Gen4 x4, one also supporting SATA3) and three SATA3 ports. For M.2 SSDs, remove the M.2 Thermal Guard heatsink, insert the SSD, and secure it with the provided screw. Reattach the heatsink. Connect SATA drives using the included SATA data cables.

الصورة: بزاوية view of the ASRock Z690 Phantom Gaming-ITX/TB4 motherboard, showing the M.2 slots and heatsinks.

4. PCIe Card Installation

Install your graphics card or other PCIe expansion cards into the PCIe 5.0 x16 slot. Ensure the card is fully seated and secured with the case's retention mechanism.

5. Connecting Peripherals and Power

Connect all necessary power cables from your power supply to the motherboard (24-pin ATX, 8-pin CPU). Connect your display to the HDMI, DisplayPort, or Thunderbolt Type-C output. Utilize the various USB ports (Thunderbolt 4/USB4 Type-C, USB 3.2 Gen2x2, USB 3.2 Gen2, USB 3.2 Gen1) for peripherals. Connect to your network via the Killer E3100 2.5G LAN port or use the Killer AX1675 WiFi 6E and Bluetooth for wireless connectivity. Install the included WiFi antenna for optimal wireless performance.

Image: Rear I/O panel of the ASRock Z690 Phantom Gaming-ITX/TB4 motherboard, showing various ports including USB, LAN, and audio.

Image: ASRock Z690 Phantom Gaming-ITX/TB4 motherboard with the WiFi antenna connected to the rear I/O.

التشغيل

تكوين BIOS/UEFI

Upon first boot, access the BIOS/UEFI setup utility by pressing the designated key (usually Del or F2) during startup. The UEFI offers both an "Easy Mode" for basic settings and a "Pro Mode" for advanced configurations. Here you can:

• تكوين ترتيب التمهيد.
• تمكين XMP profiles for optimal memory performance. Manual tuning may be required for stability at higher speeds.
• Adjust fan curves and monitor system temperatures.
• Manage onboard RGB lighting settings. To prevent RGB lights from staying on after shutdown, navigate to "Advanced" -> "Chipset Config" and disable "Turn on onboard LED in S5".
• If using an All-In-One (AIO) liquid cooler, ensure the pump is connected to the correct header (e.g., W_PUMP) and configured in the BIOS to prevent CPU overheating.

تثبيت برنامج التشغيل

After installing your operating system, ASRock's driver installer may automatically download and prompt for installation of specific drivers. Ensure all necessary drivers, including chipset, LAN, WiFi, and audio drivers, are installed for full system functionality. These can also be found on the ASRock support webموقع.

صيانة

Regular maintenance helps ensure the longevity and optimal performance of your motherboard:

• إزالة الغبار: Periodically clean dust from the motherboard and components using compressed air. Pay attention to heatsinks and fan areas.
• تحديثات BIOS: Check the ASRock website for BIOS updates. Updates can improve stability, add new features, and enhance compatibility. Follow the update instructions carefully.
• تحديثات برنامج التشغيل: Keep all drivers updated to ensure compatibility and performance with new software and hardware.
• مراقبة درجة الحرارة: Utilize monitoring software to keep track of CPU, chipset, and M.2 SSD temperatures to prevent overheating. The MOSFET heatsinks and M.2 Thermal Guard 3 are designed to assist with cooling.

استكشاف الأخطاء وإصلاحها

إذا واجهت مشاكل، فضع في اعتبارك خطوات استكشاف الأخطاء وإصلاحها الشائعة التالية:

• النظام لا يقوم بالتمهيد:
  • Verify all power connections (24-pin ATX, 8-pin CPU) are secure.
  • أعد تركيب وحدات ذاكرة الوصول العشوائي (RAM). حاول تشغيل الجهاز باستخدام شريحة ذاكرة واحدة فقط.
  • Ensure the CPU is correctly seated in the LGA 1700 socket.
  • Clear CMOS (refer to your motherboard's quick installation guide for jumper location or use the CMOS clear button on the rear I/O if available).
• Missing Network/WiFi Drivers: If the operating system does not automatically install network drivers, use the provided support CD or download them from the ASRock website on another device and transfer via USB.
• RGB Lights Stay On After Shutdown: As mentioned in the Operating section, disable "Turn on onboard LED in S5" in the BIOS under "Advanced" -> "Chipset Config".
• Overheating CPU with AIO Cooler: Ensure the AIO pump is connected to the dedicated W_PUMP header and configured correctly in the BIOS to run at full speed.
• SATA Drive Detection Issues: If using multiple M.2 drives, some SATA ports may be disabled. Consult the motherboard manual for specific port sharing details.
• اكس ام بي بروfile عدم الاستقرار: If enabling XMP causes system instability, try manually adjusting memory timings and voltage or selecting a lower XMP profile.

تحديد

مقاطع فيديو رسمية للمنتج

The following videos provide additional information and demonstrations of the ASRock Z690 Phantom Gaming-ITX/TB4 motherboard.

الضمان والدعم

For detailed warranty information and technical support, please refer to the official ASRock website or the documentation included with your product. ASRock provides resources for driver downloads, BIOS updates, and troubleshooting assistance.