Amewi Sport Car Breaker Pro 1:16 RC Car Instruction Manual

مقدمة

شكرا لك على الشراءasing the Amewi Sport Car Breaker Pro 1:16 RC Car. This manual provides essential information for the safe operation, setup, maintenance, and troubleshooting of your new remote-controlled vehicle. Please read this manual thoroughly before operating the model to ensure proper function and longevity.

معلومات السلامة

تحذير:

• هذا النموذج غير مناسب للأطفال دون سن 14 عامًا.
• Children operating this model must do so under direct adult supervision.
• Always operate the vehicle in open areas, away from people, pets, and obstacles.
• لا تعمل بالقرب من الطرق العامة أو في المناطق المزدحمة.
• Ensure all batteries are charged correctly and handled safely.
• Disconnect the battery from the model when not in use.
• تجنب ملامسة الأجزاء المتحركة أثناء التشغيل.

محتويات الحزمة

تأكد من تضمين جميع العناصر المدرجة أدناه في الحزمة الخاصة بك:

• Amewi Sport Car Breaker Pro 1:16 Model (fully assembled)
• جهاز التحكم عن بعد 2.4 جيجا هرتز
• Li-ion 7.4V 1200mAh Battery
• USB Charger with 1.5A charging current
• Additional Road Tires (set of 4)
• أدوات مختلفة
• دليل التعليمات (هذا المستند)

Image: The complete package contents, showing the RC car, remote control, battery, USB charger, additional road tires, and tools.

دليل الإعداد

1. شحن بطارية السيارة

1. Connect the Li-ion 7.4V 1200mAh battery to the supplied USB charger.
2. قم بتوصيل شاحن USB بمصدر طاقة USB مناسب (مثل منفذ USB في الكمبيوتر، أو محول USB الجداري).
3. The charging indicator on the USB charger will show the charging status. Refer to the charger's specific instructions for light indications.
4. Charging time is approximately 40-60 minutes. Do not overcharge the battery.
5. بمجرد شحنها بالكامل، افصل البطارية عن الشاحن.

2. تركيب بطارية السيارة

1. Carefully remove the body shell of the RC car. This usually involves detaching body clips.
2. حدد مكان حجرة البطارية.
3. Insert the charged Li-ion battery into the compartment and securely connect it to the vehicle's power connector (BEC plug).
4. Ensure all wires are tucked away safely and do not interfere with moving parts.
5. Reattach the body shell.

Image: The RC car chassis with the body removed, illustrating the placement of the battery and electronic components.

3. تركيب بطاريات جهاز التحكم عن بعد

1. افتح حجرة البطارية الموجودة في الجزء الخلفي من جهاز التحكم عن بعد بتردد 2.4 جيجاهرتز.
2. Insert 4x 1.5V AA batteries, ensuring correct polarity (+/-).
3. أغلق غطاء حجرة البطارية جيدًا.

Image: The 2.4 GHz remote control for the Amewi Sport Car Breaker Pro.

4. Binding the Remote Control and Vehicle

The vehicle and remote control are typically pre-bound from the factory. If re-binding is necessary:

1. تأكد من إيقاف تشغيل السيارة وجهاز التحكم عن بعد.
2. قم بتشغيل جهاز التحكم عن بعد.
3. Turn on the vehicle. The indicator lights on both devices should show a successful connection. Refer to the specific instructions for your ESC/receiver for detailed binding procedures if automatic binding fails.

تعليمات التشغيل

وظائف التحكم عن بعد

• المقود: يتحكم في التوجيه يمينًا ويسارًا.
• زناد الخانق: اسحب للتسارع للأمام، وادفع للفرملة/الرجوع للخلف.
• تقليم التوجيه (ST.TRIM): Adjusts the neutral steering position if the car pulls to one side when the steering wheel is centered.
• تقليم الخانق (TH.TRIM): Adjusts the neutral throttle position. Use if the car moves slightly forward or backward when the trigger is centered.
• Gyro Sensitivity (ESP+): Adjusts the sensitivity of the integrated gyro system. Increase for more stability, decrease for more direct control.
• أوضاع إضاءة LED: Use the designated button on the transmitter to cycle through three different front LED lighting types. Red LED light is also present at the back.

قيادة سيارتك RC

1. تشغيل الطاقة: قم بتشغيل جهاز التحكم عن بعد أولاً، ثم قم بتشغيل السيارة.
2. البداية: Gently pull the throttle trigger to move forward. Practice smooth acceleration and braking.
3. توجيه: Turn the steering wheel to guide the car. The integrated gyro system provides additional stabilization for precise handling, especially during drifts.
4. الانجراف: The car is designed for drifting. Experiment with throttle and steering inputs to initiate and maintain drifts. The adjustable gyro sensitivity can assist in controlling drifts.
5. السرعة القصوى: The car can reach speeds of 40-45 km/h. Always be aware of your surroundings.
6. مدة القيادة: Expect approximately 10-13 minutes of driving time on a full charge.
7. إيقاف التشغيل: Always turn off the vehicle first, then the remote control, after use. Disconnect the battery from the vehicle.

Image: The Amewi Sport Car Breaker Pro 1:16 RC car, showcasing its design and included drift tires.

صيانة

الرعاية العامة

• تنظيف: After each use, especially if driven in dusty or dirty conditions, clean the vehicle with a soft brush or compressed air. Avoid using water directly on electronics.
• تخزين: Store the model in a dry, cool place, away from direct sunlight. Always disconnect the battery before storage.
• العناية بالبطارية: Do not leave batteries fully charged or fully discharged for extended periods. For long-term storage, charge Li-ion batteries to approximately 50% capacity.

فحص المكونات

• Ball Bearings & Drive Shafts: The vehicle is equipped with ball bearings and metal CVD drive shafts for reduced friction and direct power transmission. Periodically inspect these components for wear and ensure they are free of debris. Lubricate as needed with RC-specific lubricants.
• تعليق: Check the shock absorbers and suspension arms for damage or excessive play.
• الإطارات: Inspect tires for wear and tear. The package includes additional road tires.

الصورة: تفصيلية view of the vehicle's suspension system, including the shock absorber and spring.

Changing Tires

Your Amewi Sport Car Breaker Pro comes with mounted drift tires and additional road tires. To change them:

1. Use the provided tools to carefully remove the wheel nuts from each wheel.
2. Remove the drift tires and replace them with the road tires.
3. Securely fasten the wheel nuts. Do not overtighten.
4. Changing tires allows you to adapt the car's performance for different surfaces and driving styles (drifting vs. on-road racing).

Image: The Amewi Sport Car Breaker Pro displayed with both its mounted drift tires and the included set of road tires.

استكشاف الأخطاء وإصلاحها

تحديد

الضمان والدعم

للحصول على معلومات الضمان أو الدعم الفني أو قطع الغيار، يرجى الاتصال بشركة Amewi مباشرة أو زيارة موقعهم الرسمي. webموقع.

رسمي Webموقع: https://amewi.com

Manufacturer: Amewi