دليل مستخدم جهاز النقش والقطع بالليزر SCULPFUN S30 بقوة 5.5 واط

1. معلومات هامة حول السلامة

Please read all safety instructions carefully before operating the SCULPFUN S30 laser engraver. Failure to follow these instructions may result in injury or damage to the device.

• سلامة الليزر: This device uses a Class 2 laser. Never look directly into the laser beam. Always wear the provided laser safety glasses during operation.
• حماية العين: Always wear appropriate laser safety glasses to protect your eyes from direct or reflected laser light.
• تهوية: Operate the laser engraver in a well-ventilated area to avoid inhaling fumes and smoke produced during engraving or cutting.
• سلامة المواد: انقش أو قطع المواد المحددة بأنها آمنة للمعالجة بالليزر فقط. تجنب المواد شديدة الانعكاس أو القابلة للاشتعال أو غير المعروفة.
• خطر الحريق: يمكن أن يتسبب الليزر في اشتعال المواد القابلة للاشتعال. لا تترك الجهاز دون مراقبة أثناء التشغيل. احتفظ بمطفأة حريق في مكان قريب.
• الأطفال والحيوانات الأليفة: Keep children and pets away from the operating area. This device is not a toy.
• التوقف في حالات الطوارئ: تعرف على موقع وطريقة تشغيل زر التوقف في حالات الطوارئ.

2. محتويات العبوة

Verify that all components are present in your package before assembly. If any parts are missing or damaged, please contact customer support.

Image: All components included in the SCULPFUN S30 package, laid out for inspection.

• Laser Engraver Frame Assembly
• S9 Laser Module (5.5W)
• محول الطاقة والكابل
• كابل يو اس بي
• نظارات السلامة من الليزر
• مجموعة أدوات (مفاتيح ربط، مفاتيح سداسية)
• Air Assist Nozzle (if included in your specific model)
• Test Materials (wood, metal sheet)
• دليل المستخدم (هذا المستند)

3. دليل الإعداد

Follow these general steps to assemble your SCULPFUN S30 laser engraver. Refer to the detailed assembly instructions provided in the box for specific diagrams and fastener details.

Image: The fully assembled SCULPFUN S30 laser engraver, ready for operation.

1. فك مكونات الحزمة: قم بإزالة جميع الأجزاء من العبوة بعناية وتحقق منها وفقًا لقائمة محتويات العبوة.
2. تجميع الإطار: قم بتوصيل الألومنيوم بروfiles to form the main frame of the engraver. Ensure all screws are tightened securely.
3. Install X and Y Axis: Mount the X-axis and Y-axis gantry components onto the frame. Ensure smooth movement along both axes.
4. Mount Laser Module: Attach the S9 laser module to the X-axis carriage. Ensure it is firmly secured and the laser focus is correctly set (refer to specific instructions for focusing).
5. توصيل الأسلاك: Connect the motor cables, limit switch cables, and laser module cable to the control board. Double-check all connections.
6. توصيل الطاقة: قم بتوصيل محول الطاقة بجهاز النقش ثم بمأخذ كهربائي مناسب.
7. تثبيت البرنامج: Install the recommended laser control software (e.g., LaserGRBL, LightBurn) on your computer. Drivers may be required.

4. تعليمات التشغيل

يقدم هذا القسم أكثر من عامةview of operating your SCULPFUN S30. Detailed software-specific instructions can be found in the respective software manuals.

صورة: نماذج مختلفةamples of items that can be engraved with the SCULPFUN S30, including wood, metal, and leather.

1. تحضير مساحة العمل: Ensure your workspace is clean, well-ventilated, and free of flammable materials. Place the material to be engraved or cut on the work surface.
2. الاتصال بجهاز الكمبيوتر: Connect the engraver to your computer via the USB cable.
3. تشغيل الطاقة: Turn on the power switch on the engraver.
4. إطلاق البرنامج: Open your chosen laser control software (e.g., LaserGRBL, LightBurn).
5. تصميم الحمل: Import your desired image or design file في البرنامج.
6. ضبط الإعدادات: Set the laser power, speed, and number of passes according to your material and desired effect. Refer to material test guides for optimal settings.
7. تركيز الليزر: Manually adjust the laser module height to achieve the smallest possible laser spot on the material surface. The S9 laser module features advanced beam shaping technology for a finer spot.


Image: Diagram illustrating the S9 laser's beam shaping technology, which creates a thinner, higher energy density beam (0.06mm) compared to ordinary square lasers (0.23mm).

8. مادة الوظيفة: Use the software to jog the laser head and confirm the engraving area on your material.
9. بدء العملية: Ensure you are wearing safety glasses. Initiate the engraving or cutting process from the software. Monitor the process closely.
10. إيقاف التشغيل: Once complete, power off the engraver and disconnect it from the computer.

5. الصيانة

Regular maintenance ensures optimal performance and extends the lifespan of your SCULPFUN S30.

• عدسة نظيفة: قم بتنظيف عدسة الليزر بشكل دوري باستخدام قطعة قماش ناعمة وخالية من الوبر ومحلول تنظيف العدسات للحفاظ على قوة الليزر ودقته.
• تنظيف القضبان والعجلات: Keep the guide rails and wheels free of dust and debris to ensure smooth movement of the laser head. Use a dry cloth or compressed air.
• تشحيم الأجزاء المتحركة: Apply a small amount of lubricant to the guide rails and lead screws as needed to reduce friction.
• فحص الأحزمة: افحص أحزمة التوقيت للتأكد من شدها وتآكلها. اضبطها أو استبدلها إذا لزم الأمر.
• Laser Module Lifespan: The S9 laser module is designed for a long service life of approximately 15,000 hours. Proper maintenance can help achieve this.


Image: Close-up of the SCULPFUN S9 laser module, highlighting its sealed, durable design and 15,000-hour service life.

6. استكشاف الأخطاء وإصلاحها

If you encounter issues with your SCULPFUN S30, refer to the following common problems and solutions:

• لا يوجد خرج ليزر:
  • Check if the laser module is properly connected and powered.
  • Ensure the laser safety key (if present) is in the 'on' position.
  • Verify laser power settings in the software.
• Engraving/Cutting Not Deep Enough:
  • Check laser focus. The laser spot should be as small as possible.
  • Increase laser power or reduce engraving speed in the software.
  • Increase the number of passes.
  • Ensure the material is suitable for laser processing. The S30 can cut up to 15mm wood, 10mm plywood, and 10mm acrylic.


Image: Demonstrates the cutting capabilities of the SCULPFUN S30, showing successful cuts through 15mm wood, 10mm plywood, and 10mm acrylic.

• Machine Not Connecting to Computer:
  • تحقق من توصيل كابل USB.
  • Check if the correct COM port is selected in the software.
  • Reinstall USB drivers if necessary.
• نقش/قص غير دقيق:
  • التحقق من وجود أحزمة أو بكرات فضفاضة.
  • Ensure the frame is rigid and not wobbling.
  • Verify material is securely placed and not shifting.

For further assistance, please contact SCULPFUN customer support.

7. المواصفات

8. الضمان والدعم

SCULPFUN products are designed for reliability and performance. For warranty information, please refer to the documentation included with your purchase or visit the official SCULPFUN webموقع.

If you require technical support, have questions about operation, or need assistance with troubleshooting, please contact SCULPFUN customer service through their official channels. Provide your product model (S30) and purchase details for faster service.

For the latest information and resources, please visit the official SCULPFUN webموقع: www.sculpfun.com