رابط XUNVC191

دليل تعليمات موزع الصوت الرقمي LiNKFOR SPDIF/Toslink 1x3

الموديل: XUNVC191

مقدمة

This manual provides detailed instructions for the installation, operation, and maintenance of your LiNKFOR Digital Audio Splitter SPDIF/Toslink 1x3. This device allows you to split a single digital optical audio source to three output devices simultaneously, enhancing your audio setup flexibility. Please read this manual thoroughly before use to ensure proper functionality and safety.

محتويات الحزمة

يرجى التأكد من أن جميع العناصر المدرجة أدناه متضمنة في الحزمة الخاصة بك:

Package contents including the splitter, optical cable, USB cable, and manual
Figure 1: Contents of the LiNKFOR Digital Audio Splitter package. Shown are the splitter unit, a 1-meter optical cable, a USB power cable, and the user manual.

مميزات المنتج

المنتج انتهىview

Familiarize yourself with the ports and indicators on your LiNKFOR Digital Audio Splitter.

Diagram of the LiNKFOR Digital Audio Splitter showing Micro USB power input, DC 5V input, Toslink IN port, LED indicator, and three Toslink OUT ports (OUT1, OUT2, OUT3).
Figure 2: Front and rear panel view of the splitter, highlighting the Micro USB power input, DC 5V power input, Toslink input, LED status indicator, and three Toslink output ports.

تعليمات الإعداد

Follow these steps to connect your LiNKFOR Digital Audio Splitter:

  1. توصيل المصدر: Use a Toslink optical cable to connect your digital audio source (e.g., TV, PS3, Xbox, Blu-ray player) to the IN port on the splitter.
  2. توصيل أجهزة الإخراج: Use up to three Toslink optical cables to connect your audio receiving devices (e.g., soundbar, amplifier, headphones with optical input, Bluetooth optical transmitter, DAC audio converter) to the OUT1, OUT2، و OUT3 ports on the splitter.
  3. تشغيل الطاقة: Connect the provided USB power cable to the تيار مستمر 5 فولت or ميكرو يو اس بي port on the splitter and then to a 5V USB power adapter (not included) or a USB port on your source device. The LED indicator will illuminate when power is supplied.
  4. تحقق من الاتصال: Ensure all cables are securely connected. Power on all connected devices.
Setup diagram showing a TV connected to the splitter, which then connects to a soundbar and a Bluetooth optical transmitter for headphones.
الشكل 3: مثالample setup demonstrating how to connect a TV to the splitter, and then distribute the audio signal to a soundbar and a Bluetooth optical transmitter for wireless headphones.
Diagram illustrating the splitter's ability to support three types of output devices: a soundbar/digital amplifier, an optical Bluetooth transmitter, and a DAC audio converter.
Figure 4: The splitter supports simultaneous output to three different types of audio devices, such as a soundbar, a Bluetooth optical transmitter for headphones, and a Digital-to-Analog Converter (DAC).

تعليمات التشغيل

Once the splitter is set up, operation is straightforward:

تشغيلية view of the splitter connected to a TV, soundbar, and a headphone charging dock with optical input.
Figure 5: The splitter in operation, allowing audio from the TV to be simultaneously played through a soundbar and a pair of headphones connected via an optical input dock.

صيانة

To ensure the longevity and optimal performance of your LiNKFOR Digital Audio Splitter, follow these maintenance guidelines:

استكشاف الأخطاء وإصلاحها

If you encounter issues with your splitter, please refer to the following common problems and solutions:

مشكلةالسبب المحتملحل
No audio output from any device.
  • No power to the splitter.
  • توصيل الكابل غير صحيح.
  • Source device not outputting optical audio.
  • Output device not configured correctly.
  • Ensure the USB power cable is connected and the LED is lit.
  • Check all Toslink cables are securely connected to the correct IN/OUT ports.
  • Verify your source device (TV, console) is set to output audio via Toslink/Optical.
  • Ensure your output devices (soundbar, amplifier) are set to receive audio from their optical input.
Audio output from some devices, but not others.
  • Faulty optical cable to specific output.
  • Output device not configured correctly.
  • Test the optical cable with another port or replace it.
  • Check the settings of the non-working output device.
Distorted or intermittent audio.
  • Damaged optical cable.
  • Unsupported audio format.
  • اتصال فضفاض.
  • استبدل الكابل البصري.
  • Ensure the audio format is LPCM2.0, DTS, or Dolby-AC3. 7.1CH Dolby Digital Plus / Dolby TrueHD are not supported.
  • تأكد من أن جميع التوصيلات محكمة.
مؤشر LED مطفأ.
  • لا يوجد مصدر للطاقة.
  • Faulty power cable or adapter.
  • Ensure the USB power cable is connected to a working 5V power source.
  • Try a different USB power cable or adapter.

تحديد

ميزةالتفاصيل
رقم الموديلXUNVC191
مدخل1x Toslink Optical
الناتج3x Toslink Optical
تنسيقات الصوت المدعومةLPCM2.0، DTS، Dolby-AC3
أقصى مسافة نقل25 meters / 82 feet (with optical cable loss <0.2dB/m)
مزود الطاقةDC 5V (via Micro USB)
الأبعاد (الطول × العرض × الارتفاع)61 × 57 × 16 ملم
وزن140 جرام
مواد الإسكانسبائك الألومنيوم
بلد المنشأالصين
Image of the LiNKFOR Digital Audio Splitter held in a hand, illustrating its compact size and dimensions of 61x57x16mm.
Figure 6: The compact dimensions of the LiNKFOR Digital Audio Splitter, measuring 61 x 57 x 16 mm, made from aluminum alloy.

الضمان والدعم

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official LiNKFOR webموقع. احتفظ بإيصال الشراء الخاص بك لمطالبات الضمان.

المستندات ذات الصلة - XUNVC191

قبلview محول LINKFOR من PS2 إلى HDMI: إعدادات تنسيق الفيديو ودليل استكشاف الأخطاء وإصلاحها
يوفر هذا الدليل معلومات أساسية حول إعداد محول LINKFOR PS2 إلى HDMI، ومعالجة مشكلات "عدم وجود صورة" الشائعة، وتفصيل تكوينات تنسيق الفيديو الضرورية للحصول على الأداء الأمثل.
قبلview LINKFOR SM-2112 2.0CH Soundbar Speaker - Operation Manual
Official operation manual for the LINKFOR SM-2112 2.0CH Soundbar Speaker. Learn about connections (HDMI ARC, Optical, USB, AUX, Bluetooth), playback controls, remote functions, warranty, and compliance information.
قبلview دليل مستخدم محول الصوت ثنائي الاتجاه LINKFOR ULK029 مقاس 3.5 مم
دليل مستخدم مفصل لمحوّل الصوت ثنائي الاتجاه LINKFOR ULK029 مقاس 3.5 مم. تعرّف على كيفية توصيل وتشغيل الجهاز لتبديل مصادر ومخرجات الصوت، وأوصاف اللوحة، ومحتويات العبوة، واستكشاف الأخطاء وإصلاحها.
قبلview دليل مستخدم محول الصوت الاستريو LINKFOR ULK034 رباعي المنافذ مقاس 3.5 مم
دليل مستخدم محول الصوت الاستريو LINKFOR ULK034 رباعي المنافذ 3.5 مم. يغطي محتويات العبوة، وأوصاف اللوحة، والمواصفات، وطريقة التوصيل والتشغيل، والأسئلة الشائعة. يدعم تحويل الصوت من مدخل إلى أربعة مخارج أو من أربعة مخارج إلى واحد.