REBEL RB-0003 3-in-1 Detector User Manual

1. المقدمة

Thank you for choosing the REBEL RB-0003 3-in-1 Detector. This device is designed to assist you in safely locating metal, wood, and live AC cables hidden within walls, ceilings, and floors. Please read this manual thoroughly before operating the device to ensure safe and effective use.

The RB-0003 is an essential tool for DIY enthusiasts and professionals, providing accurate detection to prevent damage during drilling, cutting, or renovation projects.

2. معلومات السلامة

• Always exercise caution when working near detected objects.
• Do not rely solely on the detector for safety. Always verify findings with other methods if possible, especially when dealing with electrical wires.
• حافظ على الجهاز جافًا ونظيفًا. لا تعرضه للرطوبة أو درجات الحرارة القصوى.
• لا تحاول فتح الجهاز أو تعديله. يجب أن يُجري الإصلاحات فنيون مؤهلون فقط.
• قم بإزالة البطاريات إذا كنت لن تستخدم الجهاز لفترة طويلة.

3. انتهى المنتجview

Familiarize yourself with the components of your REBEL RB-0003 detector:

الشكل 1: الجبهة view of the REBEL RB-0003 Detector in packaging. The device features a large display and a 'SELECT' button for mode switching.

الشكل 2: خلفي view of the REBEL RB-0003 Detector. This view shows the battery compartment and the product information label.

• شاشة العرض: Shows detection mode, signal strength, and low battery indicator. (Display size: 51 x 25 mm)
• حدد زر: Used to switch between detection modes (Metal, Wood, AC Cable).
• منطقة الاستشعار: Located on the back of the device, this area must be flush against the surface for accurate readings.
• حجرة البطارية: يوجد في الخلف، لتركيب البطارية.

4. الإعداد

4.1. تركيب البطارية

1. Open the battery compartment cover on the back of the device (refer to Figure 2).
2. أدخل البطاريات المطلوبة، مع التأكد من صحة القطبية (+/-). يحتاج الجهاز إلى بطاريات للتشغيل.
3. أغلق غطاء حجرة البطارية جيدًا.

The device features a low battery indicator on the display. Replace batteries promptly when this indicator appears to ensure accurate readings.

5. تعليمات التشغيل

5.1. التشغيل العام

1. Press the power button (if available, otherwise the SELECT button usually powers it on) to turn on the device.
2. اضغط على يختار button to cycle through the detection modes: Metal, Wood, and AC Cable. The selected mode will be indicated on the display.
3. Place the detector flat against the surface you wish to scan. Ensure the sensor area is in full contact.
4. Slowly slide the detector across the surface. The display will show signal strength and indicate when an object is detected.

5.2. الكشف عن المعادن

In Metal detection mode, the RB-0003 can detect metal parts in walls up to a depth of 30 mm.

• Select the Metal detection mode.
• Move the device slowly across the surface. The display will show increasing bars as it approaches a metal object.
• A distinct audio alert or visual indicator will confirm the presence of metal.

5.3. Wood Detection

The device can detect wooden profiles with a maximum dimension of 30 x 30 mm at a depth of 18 mm.

• Switch to Wood detection mode.
• Scan the wall slowly. The detector will indicate the edges and center of wooden studs or beams.
• Mark the detected areas for reference.

5.4. AC Cable Detection

The RB-0003 is capable of detecting live AC 90-250V cables.

• Select the AC Cable detection mode.
• Move the detector slowly over the area. The device will emit a warning and display an icon when live AC voltagتم الكشف عن ذلك.
• حذر: Always assume wires are live until confirmed otherwise by a qualified electrician.

6. الصيانة

• تنظيف: امسح الجهاز بقطعة قماش ناعمة وجافة. لا تستخدم منظفات أو مذيبات كاشطة.
• تخزين: Store the detector in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
• استبدال البطارية: Replace batteries when the low battery indicator appears on the display. Use only the specified battery type.

7. استكشاف الأخطاء وإصلاحها

8. المواصفات

9. الضمان والدعم

REBEL products are manufactured to high-quality standards and are guaranteed against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official REBEL webموقع.

For technical support, troubleshooting assistance, or spare parts, please contact your local REBEL dealer or customer service department. Contact information can typically be found on the product packaging or the official REBEL webموقع.