1. انتهى المنتجview
The SplatRball SRB400-SUB is an electric gel ball water bead blaster designed for recreational use. It features semi-automatic and full-automatic firing modes, capable of shooting up to 8 rounds per second at velocities up to 200 feet per second. This kit provides everything needed to begin operation.
محتويات المجموعة:
- SplatRball SRB400-SUB Electric Water Blaster
- 400-round Magazine
- 10,000 rounds of SplatRBall Gel Ball Ammunition (dehydrated)
- نظارات السلامة
- بطارية قابلة للشحن 7.4 فولت 1800 مللي أمبير
- كابل شحن USB
- Sling and Sling Clip
2. معلومات السلامة
WARNING: WEAR EYE PROTECTION AT ALL TIMES WHEN USING THIS PRODUCT. NOT SUITABLE FOR YOUNG CHILDREN. ADULT SUPERVISION IS REQUIRED.
- Always wear the provided safety glasses or other ANSI Z87.1 rated eye protection when operating or near the SplatRball blaster.
- لا تهدف إلى العينين أو الوجه.
- Do not modify the blaster or gel balls.
- Use only SplatRball certified ammunition. Other ammunition may cause damage to the blaster or injury.
- Keep fingers and other objects clear of the firing mechanism and magazine well.
- Store the blaster and gel balls out of reach of small children.
3. الإعداد والتحضير
3.1. Hydrating Gel Balls
The SplatRball gel balls are supplied in a dehydrated state and must be soaked in water before use. This process allows them to expand to their full size (7.5mm diameter) and become soft and ready for firing.
- Empty the desired amount of dehydrated gel balls into a large container.
- Add a generous amount of clean water to fully submerge the gel balls.
- Allow the gel balls to soak for a minimum of 4 hours. For best results, soak overnight (up to 8 hours).
- Once fully hydrated, the gel balls will be soft and squishy. Drain any excess water before loading.
3.2. شحن البطارية
The blaster is powered by a rechargeable 7.4V 1800mAh battery. Ensure the battery is fully charged before first use and whenever power is low.
- قم بتوصيل البطارية بكابل الشحن USB المقدم.
- قم بتوصيل كابل شحن USB بمصدر طاقة USB متوافق (مثل منفذ USB في الكمبيوتر، أو محول USB الجداري).
- The charging indicator light on the cable will show the charging status (refer to cable instructions for specific light indications).
- بمجرد شحنها بالكامل، افصل البطارية عن الشاحن.
3.3. Assembling the Blaster
Attach the magazine and sling to the blaster as follows:
- Insert the charged battery into the designated battery compartment on the blaster (refer to the blaster's markings for location).
- Align the magazine with the magazine well and push firmly until it clicks into place.
- Attach the sling clip to the sling attachment point on the blaster, then attach the sling to the clip. Adjust the sling length for comfortable carrying.
4. تعليمات التشغيل
Before operating, ensure you have read and understood all safety information.
4.1. Loading the Magazine
- Ensure the blaster's safety switch is in the "SAFE" position (marked 'X').
- Open the magazine's loading port.
- Carefully pour the hydrated gel balls into the magazine until it is full (approximately 400 rounds).
- Close the loading port securely.
Video 4.1: An official demonstration of the SplatRBall Water Bead Blaster, showing its operation and features.
4.2. Firing the Blaster
- With the magazine loaded and attached, hold the blaster firmly.
- Move the safety switch to the desired firing mode:
- 'O' for Semi-Automatic (single shot per trigger pull)
- 'OOO' for Full-Automatic (continuous firing while trigger is held)
- Aim at your target, ensuring no people or animals are in the line of fire.
- Pull the trigger to fire.
5. الصيانة
Proper maintenance ensures the longevity and optimal performance of your SplatRball blaster.
- تنظيف: After each use, especially if the blaster has been exposed to dirt or debris, wipe down the exterior with a damp cloth. Do not submerge the blaster in water.
- Gel Ball Storage: Store hydrated gel balls in a sealed container, submerged in water, to prevent them from dehydrating. They can be rehydrated if they shrink.
- العناية بالبطارية: When not in use for extended periods, store the battery in a cool, dry place. Avoid overcharging or completely draining the battery.
- إزالة انحشار الورق: If the blaster jams, ensure the safety switch is on 'X' (Safe), remove the magazine, and gently clear any obstructions from the feeding mechanism. Do not force anything into the barrel.
6. استكشاف الأخطاء وإصلاحها
If you encounter issues with your SplatRball blaster, refer to the following common problems and solutions:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| Blaster not firing or weak firing. | Low battery, unhydrated gel balls, jammed mechanism. | Charge battery fully. Ensure gel balls are fully hydrated. Clear any jams (see Maintenance section). |
| Gel balls not feeding properly. | Improperly hydrated gel balls (too small or too large), magazine not seated correctly. | Re-hydrate gel balls for longer. Ensure magazine is firmly clicked into place. |
| Blaster makes noise but no gel balls fire. | Magazine empty, gel balls stuck, motor issue. | Refill magazine. Check for and clear any obstructions. If problem persists, contact customer support. |
7. المواصفات
| ميزة | التفاصيل |
|---|---|
| اسم الموديل | SRB400-SUB water ball gel blaster |
| ماركة | كرة سبلات |
| وزن العنصر | 3 رطل |
| أبعاد العنصر (LxWxH) | 20 × 3 × 12 بوصة |
| مادة | بلاستيك |
| لون | أزرق |
| معدل الحريق | Up to 8 rounds per second (Full-Auto) |
| سرعة الفوهة | تصل سرعتها إلى 200 قدمًا في الثانية |
| سعة المجلة | 400 جولة |
| بطارية | Rechargeable 7.4V 1800mAh |
| المستخدمون المقترحون | للجنسين الكبار |
| سنة الموديل | 2021 |
8. الضمان والدعم
Your SplatRball SRB400-SUB blaster comes with a manufacturer's warranty and support resources.
- ضمان: A 30-day warranty covers manufacturer defects. Please retain your proof of purchase.
- دليل المستخدم (PDF): For a downloadable PDF version of the user manual, please refer to the official product page or انقر هنا.
- متجر العلامة التجارية: For additional products, accessories, and support, visit the official SPLATRBALL Store.
- الشركة المصنعة: كرة سبلات
