Winsome Huxton 2-Piece Bar Stools

معلومات هامة حول السلامة

Please read and understand all instructions before assembly and use. Failure to follow these instructions may result in injury or product damage. Keep this manual for future reference.

• الوزن المحدد: Do not exceed the maximum weight capacity of 220 lbs (100 kg) per stool.
• حَشد: Ensure all parts are correctly assembled and fasteners are securely tightened before use. Improper assembly can lead to instability.
• الموقع: Place stools on a flat, stable, and level surface. Avoid placing on uneven ground or against unstable surfaces to prevent tipping.
• أطفال: Supervise children around the stools to prevent climbing or misuse.
• حركة: Do not stand on the stools or use them as a ladder. Move stools by lifting, not dragging, to prevent damage to the product or flooring.

المنتج انتهىview

The Winsome Huxton Bar Stools are designed for versatile use in various home settings. This 2-piece set features a teak-finished seat and an oyster gray base, crafted from solid wood for durability and a streamlined appearance.

Image: Two Winsome Huxton bar stools, showcasing their design and finish.

قائمة الأجزاء

قبل البدء بالتجميع، تأكد من وجود جميع المكونات وسلامتها. في حال وجود أي أجزاء مفقودة أو تالفة، يُرجى التواصل مع خدمة العملاء.

• Round Seat (2)
• الساقين (8)
• العارضة (12)
• مجموعة أدوات (مسامير، غسالات، مفتاح ألين)

تعليمات التجميع

Assembly is required for these bar stools. Follow these steps carefully:

1. فك مكونات الحزمة: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Verify all parts from the parts list are present.
2. ربط الأرجل بالمقعد: For each stool, attach four legs to the underside of the round seat. Insert the screws through the pre-drilled holes in the seat and into the top of each leg. Hand-tighten screws only at this stage; do not fully tighten.
3. تركيب العوارض العرضية: Connect the crossbars between the legs. There are typically two sets of crossbars per stool (upper and lower). Align the holes and insert the screws. Again, hand-tighten only.
4. محاذاة وتشديد: Once all legs and crossbars are loosely assembled, gently place the stool upright on a flat surface. Apply slight downward pressure to ensure all components are properly seated and aligned. Then, systematically tighten all screws using the provided Allen wrench. Start with the screws connecting the legs to the seat, then the crossbars. Ensure all connections are firm and secure.
5. Repeat for Second Stool: Follow the same steps to assemble the second bar stool.

نصيحة التجميع: It is recommended to only hand-tighten all screws initially. Once all components are in place and the stool is upright, then proceed to fully tighten all screws. This helps ensure proper alignment and stability.

Image: Assembled bar stools in a home environment, demonstrating their appearance after successful assembly.

الاستخدام والتشغيل

These bar stools are designed for seating at counters, bars, or high tables. They can also serve as decorative stands for plants or lamps.

• الجلوس: Sit centrally on the stool. The crossbars serve as convenient footrests.
• استقرار: Always ensure the stool is stable before applying full weight.
• التنوع: The compact footprint allows them to be tucked neatly under most counters or high tables.

Image: Bar stools positioned under a counter in a laundry room, illustrating practical usage.

العناية والصيانة

Proper care will help maintain the appearance and longevity of your bar stools.

• تنظيف: Wipe the stools with a dry cloth to remove dust and spills. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish.
• رُطُوبَة: Protect the stools from excessive moisture and direct sunlight to prevent warping or fading.
• شد المثبتات: Periodically check and re-tighten all screws to ensure the stools remain stable and secure.

استكشاف الأخطاء وإصلاحها

• Stool Wobbles After Assembly:

  Ensure all screws are fully tightened. Loosen all screws slightly, gently press down on the seat on a flat surface to level the stool, then re-tighten all screws firmly.

• صعوبة محاذاة الأجزاء أثناء التجميع:

  Do not fully tighten any screws until all components are loosely assembled. This allows for minor adjustments and alignment before final tightening.

• Slippery Seat Surface:

  The teak-finished seat may have a smooth surface. For added grip, consider using a non-slip cushion or pad (not included).

مواصفات المنتج

Image: Technical diagram illustrating the dimensions and maximum weight capacity of the bar stool.

الضمان ودعم العملاء

Winsome Trading Inc. stands behind its products. If you receive a damaged or defective item, or require replacement parts, please contact the manufacturer directly within 60 days from the date of purchase.

For further assistance or inquiries, please refer to the contact information provided with your purchase or visit the official Winsome webموقع.

يمكنك أيضًا زيارة Winsome Store on Amazon لمزيد من المعلومات وعروض المنتجات.