Antari MB-1

دليل مستخدم جهاز الضباب المحمول Antari MB-1

Model: MB-1

مقدمة

This manual provides comprehensive instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of your Antari MB-1 Mobile Fog Machine. Please read this manual thoroughly before using the device to ensure proper function and to prevent damage or injury.

Antari MB-1 Mobile Fog Machine, front-side view

Image: The Antari MB-1 Mobile Fog Machine, a compact, black unit with a handle on top and the "Mobile MB-1 Fogger" logo on its side.

معلومات هامة حول السلامة

تحذير: قد يؤدي عدم اتباع تعليمات السلامة هذه إلى نشوب حريق أو صدمة كهربائية أو إصابة أو تلف المنتج أو الممتلكات.

محتويات الحزمة

Carefully unpack your Antari MB-1 Mobile Fog Machine and check that all items listed below are present and in good condition. If any items are missing or damaged, contact your retailer immediately.

Antari MB-1 Kit contents including fog machine, case, battery, charger, and fog fluid

Image: The Antari MB-1 Kit showing all included components: (1) MB-1 Fog Machine, (2) Carrying Case, (3) Rechargeable Battery, (4) Charger, and (5) Bottle of 500cc FLM-05S Fog Fluid.

  1. جهاز ضباب محمول انتاري MB-1
  2. حقيبة الحمل
  3. بطارية قابلة لإعادة الشحن
  4. شاحن البطارية
  5. Antari FLM-05S Fog Fluid (500cc bottle)

يثبت

1. شحن البطارية

Before first use, fully charge the rechargeable battery using the provided charger. Connect the charger to the battery and then to a suitable power outlet. The charging indicator on the charger will show the charging status. A full charge typically takes several hours.

2. تركيب البطارية

Locate the battery compartment on the Antari MB-1. Insert the fully charged battery, ensuring proper polarity. Close the compartment securely.

3. Filling the Fluid Tank

  1. Unscrew the cap of the fluid tank located on top of the machine.
  2. Carefully pour Antari FLM-05S Fog Fluid into the tank. Do not overfill.
  3. Securely screw the cap back onto the fluid tank.
جانب view of Antari MB-1 Mobile Fog Machine showing fluid tank cap and control port

صورة: لقطة جانبية مقرّبة view of the Antari MB-1, highlighting the fluid tank cap on the left and a control port on the right side of the unit.

تعليمات التشغيل

1. تشغيل

Press and hold the power button located on the handle of the machine. The indicator light will illuminate, signifying the machine is warming up. This process may take a few minutes.

Close-up of Antari MB-1 handle with power button

الصورة: تفصيلية view of the Antari MB-1's handle, showing the red power button positioned on top.

2. Generating Fog

Once the machine has warmed up (indicator light stable), press the fog button (often integrated with the power button or a separate trigger) to emit fog. The MB-1 is designed for momentary fog bursts. Release the button to stop fog production.

3. Output Control (if applicable)

Some models may feature adjustable output settings (e.g., low/high output). Refer to the markings on your specific unit for details on how to select different fog output levels.

4 إيقاف التشغيل

Press and hold the power button until the indicator light turns off. It is recommended to run the machine until the fluid tank is empty or nearly empty before prolonged storage to prevent fluid residue buildup.

صيانة

1. Cleaning the Fluid Tank

Periodically, or before storing the machine for an extended period, empty any remaining fog fluid from the tank. You may rinse the tank with distilled water, but ensure it is completely dry before refilling or storing.

2. تنظيف الفوهة

If the fog output appears weak or inconsistent, the nozzle may be partially clogged. Consult a qualified technician for cleaning or replacement of the nozzle. Do not attempt to clear clogs with sharp objects.

3. العناية بالبطارية

To prolong battery life, avoid fully discharging the battery frequently. Store the battery in a cool, dry place and recharge it periodically if not in use for a long time.

4. التخزين

Store the Antari MB-1 in its carrying case in a dry, dust-free environment, away from extreme temperatures. Ensure the fluid tank is empty or contains fresh, approved fog fluid.

استكشاف الأخطاء وإصلاحها

مشكلةالسبب المحتملحل
لا يوجد خرج ضباب
  • Machine not warmed up
  • Fluid tank empty
  • البطارية غير مشحونة أو مثبتة
  • فوهة مسدودة
  • انتظر مؤشر التسخين
  • Refill with Antari FLM-05S fluid
  • Charge and install battery correctly
  • Contact service for nozzle cleaning
انبعاث ضباب ضعيف
  • انخفاض مستوى السوائل
  • فوهة مسدودة جزئيًا
  • انخفاض شحن البطارية
  • إعادة تعبئة السوائل
  • Contact service for nozzle cleaning
  • إعادة شحن البطارية
الجهاز لا يعمل
  • البطارية غير مثبتة أو ميتة
  • زر الطاقة الخاطئ
  • Check battery installation and charge
  • Contact Antari support

تحديد

معلومات الضمان

Antari products are manufactured to the highest quality standards. This product is covered by a limited warranty against manufacturing defects. Please refer to the warranty card included with your product or visit the official Antari webللاطلاع على شروط وأحكام الضمان المفصلة، ​​يُرجى الاحتفاظ بإيصال الشراء لتقديم مطالبات الضمان.

دعم العملاء

For technical assistance, service, or replacement parts, please contact your authorized Antari dealer or visit the official Antari webموقع للحصول على موارد الدعم ومعلومات الاتصال.

Webموقع: www.antari.com (مثالampالرابط، قد يختلف الرابط الفعلي)

المستندات ذات الصلة - إم بي-1

قبلview دليل المستخدم ودليل استخدام جهاز الضباب المتنقل Antari MB-1
دليل مستخدم شامل لجهاز الضباب المتنقل Antari MB-1، يغطي الإعداد والتشغيل والسلامة والصيانة والمواصفات الفنية. تعرّف على كيفية استخدام جهاز الضباب MB-1 بكفاءة.
قبلview أنتاري FT-200 دليل مستخدم آلة الضباب للتدريب على الحرائق
دليل مستخدم شامل لجهاز مكافحة الحرائق الضبابي Antari FT-200. يغطي هذا الدليل معلومات السلامة الأساسية، وفك العبوة وفحصها، ومعلومات عن المنتج.viewتعليمات الإعداد، وأوضاع التشغيل التفصيلية (المؤقت، ومستوى الصوت، وDMX، واللاسلكي)، ووظائف لوحة التحكم، وإعدادات القائمة، وتوصيات السوائل، وإجراءات الصيانة، وإعادة ضبط القاطع، والمواصفات الفنية.
قبلview أنتاري FT-100 دليل مستخدم آلة الضباب للتدريب على الحرائق
دليل مستخدم شامل لجهاز الضباب للتدريب على مكافحة الحرائق Antari FT-100، يشرح بالتفصيل الإعداد والتشغيل واحتياطات السلامة والصيانة والمواصفات الفنية. أساسي لمحاكاة التدريب على مكافحة الحرائق.
قبلview ورقة بيانات سلامة سائل ضباب أنتاري (FLM-05S)
ورقة بيانات السلامة الشاملة لمنتج سائل ضباب أنتاري (FLM-05S)، والتي توضح بالتفصيل هوية المنتج، وتصنيف المخاطر، والتركيب، والتداول الآمن، والتخزين، وضوابط التعرض، والمعلومات السمية والبيئية، والتخلص منه، والامتثال التنظيمي.
قبلview دليل مستخدم مولد الدخان Antari FT-55 - التشغيل والسلامة والمواصفات
دليل مستخدم شامل لمولد الدخان Antari FT-55 بدون مضخة، والقادر على العمل دون الحاجة إلى مصدر طاقة رئيسي. يغطي هذا الدليل السلامة والتشغيل والصيانة والمواصفات الفنية وقطع الغيار.
قبلview أنتاري FT-70 دليل مستخدم آلة الضباب للتدريب على الحرائق
دليل مستخدم شامل لجهاز تدريب مكافحة الحرائق الضبابي Antari FT-70، يشمل السلامة والتشغيل والصيانة والمواصفات واستكشاف الأخطاء وإصلاحها. يتضمن تفاصيل حول التحكم عن بُعد اللاسلكي وتعليمات التوصيل الأرضي.