1. المقدمة
This manual provides detailed instructions for the installation, operation, and maintenance of your IRONZON Fingerprint Door Lock. Please read this manual thoroughly before installation and use to ensure proper function and to maximize the lifespan of your device. Keep this manual for future reference.
2. انتهى المنتجview
The IRONZON Fingerprint Door Lock offers a secure and convenient keyless entry solution for various applications, including homes, hotels, apartments, and bedrooms. It integrates multiple unlocking methods for enhanced security and ease of use.
المميزات الرئيسية:
- طرق فتح متعددة: Fingerprint, Anti-peep Virtual Password, and Physical Key.
- التعرف السريع على بصمات الأصابع: Up to 98% recognition rate, unlocking in approximately 1 second. Supports up to 50 unique fingerprints.
- التثبيت DIY: Designed for standard US doors, requiring no additional wiring or drilling. Compatible with both left-handed and right-handed doors.
- قوة الطوارئ: Equipped with a Type-C interface for emergency charging and a low battery reminder function.
Image 2.1: The IRONZON Fingerprint Door Lock, showcasinبفضل تصميمه الأنيق ولوحة المفاتيح المدمجة.
محتويات الحزمة:
- Exterior Handle with Fingerprint Sensor and Keypad
- مقبض داخلي
- بولت مزلاج
- لوحة الإضراب
- مسامير التثبيت
- مفاتيح مادية (2)
- قالب التثبيت
- دليل المستخدم
3. دليل التثبيت
The IRONZON Fingerprint Door Lock is designed for straightforward DIY installation, typically requiring only a screwdriver. No additional drilling or wiring is necessary for most standard door setups.
3.1 فحوصات ما قبل التثبيت:
- سمك الباب: Ensure your door thickness is between 1-3/8 inches (35 mm) and 2-1/8 inches (55 mm).
- انتكاسة: Verify your door's backset is either 2-3/8 inches (60 mm) or 2-1/8 inches (70 mm).
- تسليم الباب: The lock is reversible and fits both left-handed and right-handed doors.
3.2 خطوات التثبيت:
- إزالة القفل الحالي: Carefully remove your current door knob and latch mechanism.
- تركيب مزلاج القفل: Insert the new latch bolt into the door edge and secure it with screws. Ensure the latch is oriented correctly for your door's opening direction.
- Install Exterior Handle: Place the exterior handle assembly through the door, aligning it with the latch bolt.
- Install Interior Handle: Connect the interior handle assembly to the exterior handle, ensuring all cables are properly routed and not pinched.
- مقابض آمنة: Use the provided screws to firmly attach both handle assemblies to the door. Do not overtighten.
- تركيب البطاريات: Open the battery cover on the interior handle and insert 4 AAA alkaline batteries (not included), observing correct polarity.
- وظيفة الاختبار: After installation, test all unlocking methods (fingerprint, keypad, key) to ensure smooth operation before closing the door completely.
Image 3.1: Visual representation of the easy installation process using a screwdriver.
4. تعليمات التشغيل
Your IRONZON Fingerprint Door Lock offers multiple convenient ways to access your space.
4.1 طرق إلغاء القفل:
4.1.1 فتح القفل ببصمة الإصبع
The fingerprint sensor allows for quick and secure access. Up to 50 unique fingerprints can be registered.
- التسجيل: Refer to the programming section for instructions on how to add new fingerprints.
- الاستخدام: Place your registered finger flat on the fingerprint sensor. The lock will unlock with a successful scan.
Image 4.1: Demonstrating the fingerprint unlock feature with a glowing sensor.
4.1.2 Keypad Unlock (Anti-peep Virtual Password)
Use a numerical password for entry. The anti-peep function allows you to enter random digits before or after your actual password to prevent others from guessing your code.
- ضبط كلمة المرور: Refer to the programming section for instructions on how to set and change user passwords.
- الاستخدام: Enter any random digits, followed by your actual password, and then more random digits (e.g., 250201 + 123456 + 250201). Press '#' to confirm.
Image 4.2: Illustrating the keypad unlock with the anti-peep virtual password feature.
4.1.3 Physical Key Unlock
In case of electronic malfunction or dead batteries, the physical key provides a reliable backup entry method.
- الاستخدام: Insert the physical key into the keyhole located at the bottom of the exterior handle and turn to unlock.
Image 4.3: Showing the use of a physical key for emergency or alternative access.
4.2 Battery Management:
The lock requires 4 AAA alkaline batteries for operation.
- تنبيه انخفاض البطارية: The lock will provide an audible and/or visual alert when batteries are low, indicating it's time for replacement.
- الشحن في حالات الطوارئ: If batteries completely drain, connect a Type-C cable to the emergency charging port on the exterior handle to temporarily power the lock and gain access.
Image 4.4: Visual indicators for low battery, emergency charging port, and backlit keypad.
5. الصيانة
Regular maintenance ensures optimal performance and longevity of your IRONZON Fingerprint Door Lock.
5.1 استبدال البطارية:
When the low battery alert activates, replace all 4 AAA alkaline batteries promptly. Use high-quality batteries for best performance.
- Open the battery cover on the interior handle.
- قم بإزالة البطاريات القديمة.
- قم بإدخال بطاريات AAA جديدة، مع التأكد من القطبية الصحيحة (+/-).
- أغلق غطاء البطارية بشكل محكم.
5.2 التنظيف:
Keep the fingerprint sensor and keypad clean for accurate operation.
- امسحي الأسطح بقطعة قماش ناعمة وجافة.
- تجنب استخدام المنظفات الكاشطة أو المذيبات أو المواد الكيميائية القاسية، حيث يمكن أن تؤدي إلى إتلاف الطبقة النهائية والمكونات الإلكترونية.
6. استكشاف الأخطاء وإصلاحها
If you encounter issues with your IRONZON Fingerprint Door Lock, refer to the following common problems and solutions:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| لم يتم التعرف على بصمة الإصبع. | Fingerprint sensor is dirty; finger is wet or improperly placed; unregistered fingerprint. | Clean the sensor. Ensure your finger is dry and covers the sensor completely. Re-enroll fingerprint if necessary. Try another registered finger or unlocking method. |
| Keypad not responding or lock beeps continuously. | Low batteries; incorrect password; system error. | Replace batteries immediately. Use the Type-C emergency power. Ensure correct password entry. If continuous beeping persists after battery replacement, contact support. |
| Lock does not unlock with valid password/fingerprint. | Batteries are completely dead; mechanical obstruction; system error. | Use the physical key for immediate access. Use emergency Type-C power. Check for any physical obstructions. If the issue persists, contact customer support. |
| Auto-lock feature cannot be disabled or adjusted. | Incorrect programming sequence; temporary software glitch. | Refer to the programming section of the full manual (if available) for specific instructions on auto-lock settings. If the issue persists, a factory reset might be required (consult support for reset procedures). |
7. المواصفات
| ميزة | مواصفة |
|---|---|
| ماركة | IRONZON |
| رقم الموديل | 84d3f1d3-1269-480d-a3c8-fd7a8667b443 |
| نوع القفل | Keypad, Fingerprint |
| ميزة خاصة | التعرف على بصمات الأصابع |
| مادة | الزنك |
| لون | أسود |
| أبعاد العنصر (الطول × العرض × الارتفاع) | 6.3 × 2.4 × 2.4 بوصة |
| وزن العنصر | 2.05 رطل |
| مصدر الطاقة | 4 بطاريات قلوية AAA (غير متضمنة) |
| الطاقة الطارئة | منفذ USB من النوع C |
| توافق سمك الباب | 1-3/8'' to 2-1/8'' (35 mm - 55 mm) |
| توافق المسافة الخلفية | 2-3/8'' (60 mm) and 2-1/8'' (70 mm) |
8. الضمان والدعم
For warranty information, technical support, or any questions not covered in this manual, please refer to the product packaging or contact IRONZON customer service directly. Contact details are typically available on the manufacturer's official webالموقع أو من خلال منصة الشراء الخاصة بك.
