دليل مستخدم الميكروفون الاحترافي Genesis Radium 300 Studio XLR

مقدمة

This manual provides detailed instructions for the setup, operation, and maintenance of your Genesis Radium 300 Studio XLR Professional Microphone. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

محتويات الحزمة

تأكد من تضمين جميع العناصر المدرجة أدناه في الحزمة الخاصة بك:

• Genesis Radium 300 Studio XLR Microphone
• Articulated Arm (Boom Arm)
• مرشح البوب
• Anti-Shock Basket (Shock Mount)
• Sponge Sleeve (Foam Windscreen)
• XLR to 3.5mm Mini Jack Cable (250 cm)

تعليمات الإعداد

Follow these steps to assemble and connect your microphone system.

1. Attach the Articulated Arm: بشكل آمن clamp the articulated arm to a stable surface, such as a desk or table, using the integrated clamp. Ensure it is tightened sufficiently to prevent movement.
2. Mount the Anti-Shock Basket: Screw the anti-shock basket onto the threaded end of the articulated arm.
3. أدخل الميكروفون: Carefully place the Genesis Radium 300 microphone into the anti-shock basket. The basket is designed to isolate the microphone from vibrations.
4. قم بتركيب فلتر الصوت: Mount the pop filter to the articulated arm or desk using its clamp. Position the pop filter approximately 2-3 inches (5-7 cm) in front of the microphone capsule.
5. Apply the Sponge Sleeve: If desired, place the sponge sleeve over the microphone capsule for additional wind noise reduction.
6. قم بتوصيل كابل XLR: Connect the XLR end of the provided cable to the microphone. Connect the 3.5mm mini jack end to your computer's microphone input or compatible audio interface. For professional studio equipment, an XLR-to-XLR cable (not included) may be required.
7. ضبط الموقف: Adjust the articulated arm and microphone position to your preferred height and distance for optimal sound capture.

Image: The Genesis Radium 300 Studio XLR microphone fully assembled with its articulated arm, shock mount, and pop filter, ready for use.

تعليمات التشغيل

Microphone Placement and Usage

The Radium 300 XLR is a cardioid condenser microphone, meaning it primarily picks up sound from the front, while rejecting sounds from the sides and rear. This characteristic is ideal for vocal recordings, streaming, and podcasting to minimize ambient noise.

• المسافة المثالية: Position the microphone 6-12 inches (15-30 cm) from the sound source (e.g., your mouth) for clear audio.
• Pop Filter Function: The pop filter helps to reduce plosive sounds (like 'p' and 'b') and protects the microphone from moisture. Ensure it is correctly positioned between you and the microphone.
• جبل المضادة للصدمة: The anti-shock basket minimizes vibrations transmitted through the desk or arm, ensuring cleaner recordings.
• مقسم الإشارة: The microphone features a signal splitter, allowing simultaneous connection of headphones via a minijack for monitoring audio.

Software Configuration (PC/Laptop)

After connecting the microphone, you may need to select it as the default recording device in your operating system's sound settings and any recording software you use.

1. الويندوز: Right-click the speaker icon in the taskbar, select "Sound settings," then navigate to the "Recording" tab. Select "Microphone (Realtek High Definition Audio)" or similar, set it as default, and adjust levels.
2. ماك: Go to "System Preferences" > "Sound" > "Input." Select the connected microphone and adjust the input volume.
3. برنامج التسجيل: Within your recording application (e.g., OBS Studio, Audacity, Discord), ensure the Genesis Radium 300 is selected as the audio input device.

صيانة

• تنظيف: Use a soft, dry cloth to clean the microphone body and accessories. Do not use liquid cleaners or solvents.
• مرشح فرقعة: The pop filter can be gently cleaned with a damp استخدم قطعة قماش إذا لزم الأمر. تأكد من جفافها تمامًا قبل إعادة تثبيتها.
• تخزين: When not in use for extended periods, store the microphone in a clean, dry environment to protect it from dust and moisture.
• العناية بالكابلات: Avoid sharp bends or kinks in the XLR cable to prevent damage.

استكشاف الأخطاء وإصلاحها

لا يوجد إخراج صوت:

• Ensure the XLR cable is securely connected to both the microphone and the input device.
• Verify that the microphone is selected as the default recording device in your operating system's sound settings.
• Check the input volume levels in your operating system and recording software.
• Test with a different cable or input port if available.

جودة صوت رديئة / ضوضاء خلفية:

• Ensure the pop filter is correctly positioned to reduce plosives.
• Verify the microphone is securely seated in the anti-shock basket to minimize vibrations.
• Check microphone placement relative to the sound source and ambient noise. The cardioid pattern reduces side and rear noise.
• Adjust gain levels to avoid clipping or excessive background hiss.

لم يتم التعرف على الميكروفون:

• Try connecting the microphone to a different USB port or computer.
• تأكد من أن برامج تشغيل نظام التشغيل لديك محدثة.

تحديد

الضمان والدعم

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Genesis webالموقع. احتفظ بإثبات الشراء الخاص بك لتقديم مطالبات الضمان.