مجموعة مصابيح إيفر برايت اللاسلكية LED ثلاثية الألوان مع 12 لون RGB ودليل استخدام جهاز تحكم عن بعد

1. المقدمة

This manual provides detailed instructions for the EverBrite 3-Pack Wireless LED Puck Lights. These versatile lights offer 12 RGB color options, remote and touch control, and timing functions, making them suitable for various indoor lighting needs.

2. ما هو المشمول

• 3 x EverBrite Wireless LED Puck Lights
• 1 × جهاز التحكم عن بعد
• 9 x AAA Batteries (3 per light)
• 3 x Double-Sided Adhesive Tapes

Image: Contents of the EverBrite 3-Pack Wireless LED Puck Lights package, including three puck lights, a remote control, nine AAA batteries, and three adhesive tapes.

3. الإعداد والتثبيت

3.1. تركيب البطارية

1. Gently twist the back cover of each puck light counter-clockwise to open the battery compartment.
2. Insert 3 AAA batteries into each light, ensuring correct polarity (+/-).
3. Replace the back cover by aligning the notches and twisting clockwise until secure.

Image: Step-by-step illustration of opening the battery cover and inserting AAA batteries into the puck light.

3.2. تركيب الأضواء

1. Clean the surface where you intend to mount the light. Ensure it is dry and free of dust.
2. Peel off one side of the double-sided adhesive tape and apply it firmly to the back of the puck light.
3. Peel off the other side of the adhesive tape and press the light firmly onto the desired surface for at least 30 seconds.

Image: Illustration showing the application of double-sided adhesive tape to the back of the puck light for mounting.

4. تعليمات التشغيل

4.1. التحكم باللمس

Press the center of the light to turn it ON/OFF. Repeated presses will cycle through preset colors (White, Red, Green, Blue) and then OFF.

Image: Demonstrates the touch control feature of the puck light, cycling through white, red, green, and blue colors.

4.2. جهاز التحكم عن بعد

The included remote control allows for comprehensive management of the puck lights from up to 20 feet away. Point the remote directly at the lights for optimal response.

الصورة: تفصيلية view of the remote control, highlighting buttons for ON/OFF, color selection, brightness adjustment, and timing functions.

• تشغيل/إيقاف: Press the "ON" button to turn on all connected lights. Press "OFF" to turn them off.
• اختيار اللون: Choose from 12 RGB colors using the color palette buttons.
• الضوء الأبيض: Press the "W" button for a pure white light.
• ضبط السطوع: استخدم أزرار رفع/خفض السطوع لزيادة أو تقليل شدة الإضاءة.
• فلاش الوضع: Press "FLASH" to activate a mode where 7 colors flash gradually.
• وضع التلاشي: Press "FADE" to activate a mode where 7 colors dimmable gradually.
• وظائف المؤقت: Set the lights to automatically turn off after 30 minutes ("30 min") or 60 minutes ("60 min").

5. الصيانة

5.1. استبدال البطارية

When the lights dim or stop responding, it's time to replace the AAA batteries. Follow the battery installation steps in Section 3.1. For optimal performance, replace all three batteries in a puck light at the same time.

5.2. التنظيف

Wipe the lights with a soft, dry cloth. Do not use abrasive cleaners or immerse the lights in water.

6. استكشاف الأخطاء وإصلاحها

• الأضواء لا تعمل: Ensure batteries are correctly installed and not depleted. Check if the remote control battery is functional.
• جهاز التحكم عن بعد لا يستجيب: Point the remote directly at the lights. Ensure there are no obstructions. Replace the remote's battery if necessary.
• Lights falling off: Ensure the mounting surface is clean and dry before applying adhesive. For heavy-duty applications or rough surfaces, consider additional mounting solutions.
• عمر بطارية قصير: Continuous use of color-changing modes (Flash/Fade) or high brightness settings can deplete batteries faster. Using timer functions can help conserve battery life.

7. المواصفات

8. الضمان والدعم

For warranty information or technical support, please refer to the product packaging or contact EverBrite customer service directly. Contact details are typically available on the manufacturer's webالموقع أو من خلال بائع التجزئة الخاص بك.