دليل مستخدم شريط إضاءة LED من نوع Kolink Inspire L1 ARGB بطول 30 سم

1. المقدمة

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Kolink Inspire L1 ARGB LED Strip. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. معلومات السلامة

• تأكد من أن مصدر الطاقة يطابق المجلدtage requirements specified for the LED strip (230 Volts).
• Do not cut or modify the LED strip unless explicitly instructed, as this may damage the product and void the warranty.
• Avoid exposing the LED strip to extreme temperatures or direct moisture. This product is designed for indoor use.
• يحفظ بعيدًا عن متناول الأطفال.
• افصل الطاقة قبل التنظيف أو إجراء أي صيانة.

3. محتويات العبوة

The Kolink Inspire L1 ARGB LED Strip package includes:

• 1 x Kolink Inspire L1 ARGB LED Strip (30cm)

Note: Specific accessories such as a remote control or power adapter may be sold separately or integrated depending on the product variant. Refer to your product packaging for exact contents.

4. الإعداد والتثبيت

4.1. التحضير

• Choose a clean, dry, and smooth surface for installation. Ensure the surface is free from dust, oil, or moisture.
• قم بفك شريط LED بعناية لتجنب الانثناءات أو التلف.

4.2. خطوات التثبيت

1. التمركز: Determine the desired placement for your LED strip. The strip is flexible and can be shaped to fit various contours.
2. التصاق: If your strip includes an adhesive backing, carefully peel off the protective layer from a small section and press the strip firmly onto the prepared surface. Continue peeling and pressing along the length of the strip.
3. اتصال: Connect the LED strip's connector cable to a compatible ARGB controller or motherboard header. Ensure the connection is secure and correctly oriented to prevent damage. Refer to your ARGB controller or motherboard manual for specific connection details.
4. قوة: Connect the ARGB controller or motherboard to a suitable power supply. The LED strip operates at 230 Volts and 18 Watts.

Figure 1: An image showing the Kolink Inspire L1 ARGB LED Strip coiled, illuminated with a gradient of colors from purple to green, highlighting its multi-color capabilities. A connector cable is visible.

5. التشغيل

The Kolink Inspire L1 ARGB LED Strip is controlled via a compatible ARGB controller or motherboard software. The product specifications mention "Control Method: Remote", implying a remote control might be included or compatible. If a remote is provided, follow its specific instructions for operation.

• تشغيل/إيقاف التشغيل: The LED strip will power on when the connected system or controller is powered on. Power off by shutting down the system or controller.
• اختيار اللون والوضع: Use your ARGB controller's software or the provided remote control (if applicable) to select desired colors, lighting effects, and brightness levels. The strip supports various RGB color options and dynamic lighting patterns.

6. الصيانة

6.1. التنظيف

• Ensure the LED strip is disconnected from power before cleaning.
• Gently wipe the surface of the LED strip with a soft, dry, or slightly damp قطعة قماش.
• Do not use harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the LEDs or the strip's coating.

6.2. التخزين

If storing the LED strip for an extended period, ensure it is clean, dry, and coiled loosely to prevent damage to the internal wiring. Store in a cool, dry place away from direct sunlight.

7. استكشاف الأخطاء وإصلاحها

8. المواصفات

9. الضمان والدعم

For warranty information or technical support, please refer to the official KOLINK webالموقع أو تواصل مع بائع التجزئة. احتفظ بإيصال الشراء كإثبات للشراء.