مقدمة
This manual provides detailed instructions for the operation and maintenance of your mooas MC-M3 Digital Mirror LED Alarm Clock. This device features a large LED display, dual alarm functionality, adjustable brightness, temperature and humidity display, and a convenient USB charging port.
الصورة: أكثر منview of the mooas MC-M3 Digital Mirror LED Alarm Clock, showcasing its design and available colors (Mint, Dark Gray, White).
محتويات الحزمة
- mooas MC-M3 Digital Mirror LED Alarm Clock
- USB Cable (1.2A)
- دليل المستخدم
يثبت
تشغيل الجهاز
The mooas MC-M3 clock can be powered via a USB cable or AAA batteries. For continuous display of the LED, the clock must be connected to a USB power source.
- طاقة USB: Connect the provided USB cable to the DC 5V power terminal on the back of the clock and plug the other end into a USB power adapter (not included) or a powered USB port.
- طاقة البطارية: Insert 3 AAA batteries (not included) into the battery compartment on the back of the clock. When operating on battery power, the LED display will only light up for 10 seconds after a button press to conserve energy.
Image: Rear panel of the clock, highlighting the battery cover, power input, and USB charging port.
تعليمات التشغيل
أزرار التحكم في الأعلىview
The clock features intuitive touch sensor buttons on the top panel and a rolling button on the side for brightness control.
Image: Top panel of the clock with touch sensor buttons clearly visible.
ضبط الوقت والتاريخ
- اضغط مع الاستمرار على وقت button (clock icon) on the top panel until the time display flashes.
- استخدم + و - أزرار لضبط الساعة.
- اضغط على وقت button again to move to minute setting, then use + و - للتعديل.
- استمر في الضغط على ملف وقت button to cycle through year, month, and day settings, adjusting each with + و -.
- اضغط على وقت button one last time to confirm and exit time/date setting.
ضبط المنبهات (منبهات مزدوجة)
- اضغط مع الاستمرار على إنذار button (bell icon) on the top panel until the alarm time display flashes. The alarm indicator (1 or 2) will also flash.
- استخدم + و - أزرار لضبط ساعة التنبيه.
- اضغط على إنذار button again to move to minute setting, then use + و - للتعديل.
- اضغط على إنذار button again to set the second alarm, repeating steps 2 and 3.
- اضغط على إنذار button one last time to confirm and exit alarm setting.
لتفعيل أو تعطيل جهاز الإنذار، اضغط ضغطة قصيرة على إنذار button. The corresponding alarm indicator (1 or 2) will appear or disappear on the display.
الصورة: مفصلة view of the display, indicating time, alarm status, humidity, and temperature.
وظيفة الغفوة
عندما يصدر صوت التنبيه، اضغط على غفوة button (Zz icon) on the top panel to activate the snooze function. The alarm will temporarily stop and sound again after a set interval. If no buttons are pressed when the alarm rings, it will automatically sound at the same time the next day.
ضبط السطوع
Adjust the LED display brightness using the orange rolling button located on the upper right side of the clock. Roll the button up or down to increase or decrease brightness. This allows for fine-tuned adjustment to suit various lighting conditions, including dimming for nighttime use.
Image: The rolling button for detailed brightness control.
12/24 Hour Mode and Temperature Units
To switch between 12-hour and 24-hour time formats, or between Celsius (°C) and Fahrenheit (°F) for temperature display, short press the وضع button (sun/moon icon with Zz) on the top panel. Cycle through the options until your desired format is displayed.
منفذ شحن USB
The clock is equipped with a USB charging port on its back, allowing you to charge compatible devices such as smartphones. The maximum output for this port is 5V 1A.
Image: The clock displaying time, temperature, and humidity, with a smartphone charging from its USB port.
صيانة
- Clean the clock's surface with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Ensure the USB cable and power adapter are in good condition.
- If using batteries, replace them when the display becomes dim or unresponsive (when not connected to USB power).
- تجنب تعريض الساعة لدرجات حرارة قصوى أو لأشعة الشمس المباشرة أو الرطوبة العالية.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| Display is off or very dim. | Not connected to USB power, or batteries are low/dead. | Connect the clock to a USB power source for continuous display. If using batteries, replace them. Adjust brightness with the rolling button. |
| لا يصدر صوت الإنذار. | لم يتم تفعيل التنبيه أو تم ضبطه بشكل غير صحيح. | Ensure the alarm indicator (1 or 2) is visible on the display. Re-check alarm time settings. |
| الوقت/التاريخ غير صحيح. | Time/Date was not set or reset due to power interruption. | اتبع تعليمات "ضبط الوقت والتاريخ" لإعادة الضبط. |
| منفذ شحن USB لا يعمل. | Device not properly connected or power source insufficient. | Ensure the clock is connected to a stable USB power source. Check the charging cable of the device you are trying to charge. |
تحديد
| ماركة | مواس |
| رقم الموديل | MC-M3 |
| نوع العرض | الصمام الرقمي |
| مصدر الطاقة | Corded Electric (USB DC 5V) / 3 x AAA Batteries (not included) |
| مخرج يو اس بي | 5V 1A (الحد الأقصى) |
| أبعاد المنتج | 8 بوصة عرض × 4 بوصة ارتفاع (20.32 سم عرض × 10.16 سم ارتفاع) |
| وزن العنصر | 6 أونصة (170.1 جرامًا) |
| مادة | أكريلونيتريل بوتادين ستايرين (ABS) |
| المميزات الخاصة | Dual Alarm, Snooze, Brightness Adjustment, 12/24H Mode, Temperature (°C/°F) & Humidity Display, Mirror Display |
Image: The mooas MC-M3 clock in its three available colors, illustrating its compact size.
الضمان والدعم
Specific warranty information is not provided in the product details. For support or warranty inquiries, please contact mooas customer service through their official webالموقع أو بائع التجزئة الذي تم شراء المنتج منه.
