1. المقدمة
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Lumi LPA36-463A Full-Motion TV Wall Mount. Please read this manual thoroughly before installation and retain it for future reference. This wall mount is designed to securely hold most LED and LCD televisions ranging from 37 to 70 inches, with a maximum weight capacity of 45 kg (99 lbs).
The full-motion design allows for maximum extension, tilt, and rotation of your television, providing optimal viewing angles from various positions within a room. The mount can extend up to 475 mm from the wall and retract to a slim profile 95 ملم.
Image 1.1: The Lumi LPA36-463A Full-Motion TV Wall Mount, showing its articulated arm and VESA plate.
2. معلومات السلامة
تحذير: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer.
- لا تتجاوز الحد الأقصى للوزن وهو 45 كجم (99 رطل).
- صُمم هذا الحامل للتركيب على الجدران الخرسانية الصلبة، أو جدران الطوب، أو الجدران الخشبية. لا تقم بتركيبه على الجدران الجصية فقط.
- تأكد من أن هيكل الحائط يمكنه أن يدعم بشكل آمن الوزن الإجمالي للحامل والتلفزيون.
- Use only the mounting hardware provided. Do not use power tools to tighten screws, as this may strip threads.
- أبقِ جميع الأجزاء الصغيرة بعيدًا عن متناول الأطفال.
- Always have at least two people for installation to prevent injury or damage.
- تحقق من جميع الاتصالات بشكل دوري للتأكد من بقائها آمنة.
3. محتويات العبوة
Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact your retailer for assistance.
| جزء | وصف | كمية |
|---|---|---|
| تجميع لوحة الحائط | Main wall mounting bracket with articulated arm. | 1 |
| TV Bracket (VESA Plate) | Bracket that attaches to the back of the TV. | 1 |
| مجموعة أدوات التثبيت | Includes various screws, washers, and anchors for wall and TV attachment. | مجموعة واحدة |
| مستوى | For ensuring horizontal alignment during installation. | 1 |
| دليل التعليمات | هذا المستند. | 1 |
4. الإعداد والتثبيت
Before you begin, ensure you have the necessary tools: pencil, drill, stud finder (for wood studs), measuring tape, and a Phillips head screwdriver. It is highly recommended to have two people for installation.
4.1. تحديد موقع التركيب
- Choose a location on the wall that can support the weight of the TV and mount.
- For wood stud walls, locate the center of the studs using a stud finder.
- For concrete or brick walls, ensure there are no hidden pipes or electrical wires.
- Mark the desired height for the top of your TV.
4.2. قم بتثبيت لوحة الحائط على الحائط
- Position the wall plate assembly against the wall at the desired height. Use the integrated level to ensure it is perfectly horizontal.
- Mark the drill holes through the wall plate onto the wall with a pencil.
- حفر ثقوب تجريبية:
- For wood studs: Use a 5.5mm (7/32") drill bit.
- For concrete/brick: Use a 10mm (3/8") masonry drill bit and insert wall anchors.
- ثبّت لوحة الحائط على الحائط باستخدام مسامير التثبيت والغسالات المرفقة. شدّها جيدًا، ولكن لا تُفرط في إحكامها.
4.3. قم بتثبيت حوامل التلفزيون على التلفزيون
- ضع جهاز التلفزيون الخاص بك بعناية ووجهه لأسفل على سطح ناعم ونظيف.
- Identify the VESA mounting holes on the back of your TV. This mount supports VESA patterns up to 400x400 mm.
- Select the appropriate screws (M4, M6, or M8) and washers from the hardware kit that fit your TV's mounting holes.
- Attach the TV brackets to the back of your TV, ensuring they are centered and securely fastened. Do not overtighten.
4.4. Mount TV to Wall Plate
- With assistance, carefully lift the TV and hook the TV brackets onto the wall plate assembly.
- تأكد من تثبيت التلفزيون بإحكام على لوحة الحائط.
- Engage any safety locking mechanisms (if present) to prevent accidental dislodgement.
5. تعليمات التشغيل
The Lumi LPA36-463A mount offers full-motion capabilities for optimal viewالمرونة.
5.1. Adjusting Extension and Retraction
- Gently pull the TV away from the wall to extend the arm. The mount can extend up to 475 mm.
- Push the TV back towards the wall to retract the arm. The mount can retract to a minimum distance of 95 mm from the wall.
- Always move the TV smoothly and avoid sudden jerks.
5.2. Adjusting Tilt
- The mount allows for vertical tilt adjustment. Loosen the tilt adjustment knobs (if present, refer to diagram in physical manual) on the TV brackets.
- Adjust the TV to the desired upward or downward angle.
- Tighten the tilt adjustment knobs to secure the TV in position.
5.3. Adjusting Swivel (Rotation)
- The articulated arm allows for horizontal swivel of the TV up to 90 degrees left and right.
- Gently push or pull the side of the TV to rotate it to your preferred viewزاوية جي.
- No locking mechanism is typically required for swivel; the friction of the joints holds the position.
6. الصيانة
تضمن الصيانة المنتظمة طول عمر وتشغيل حامل التلفزيون الخاص بك بشكل آمن.
- تنظيف: امسح الحامل بقطعة قماش ناعمة وجافة. لا تستخدم المنظفات الكاشطة أو المذيبات.
- التفتيش الدوري: Every 3-6 months, check all screws and bolts to ensure they are tight and secure. Retighten if necessary.
- تزييت المفصل: If the arm movement becomes stiff, a small amount of silicone-based lubricant can be applied to the pivot points. Avoid oil-based lubricants.
- فحص الأضرار: Inspect the mount for any signs of damage, wear, or corrosion. If any damage is found, discontinue use and contact customer support.
7. استكشاف الأخطاء وإصلاحها
If you encounter issues with your Lumi LPA36-463A TV mount, refer to the following common problems and solutions.
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| التلفزيون ليس مستويًا بعد التثبيت. | Wall plate not perfectly horizontal. | Carefully loosen wall plate bolts, adjust with a level, and retighten. Some mounts have post-installation leveling adjustments; check your specific model. |
| يبدو الحامل مرتخياً أو متذبذباً. | Mounting bolts are not tight enough or incorrect wall anchors were used. | Ensure all wall bolts and TV attachment screws are securely tightened. Verify correct anchors for your wall type. If problem persists, consult a professional. |
| TV cannot tilt or swivel smoothly. | المفاصل ضيقة للغاية أو تحتاج إلى تزييت. | Check if any adjustment knobs are overtightened. Apply a small amount of silicone-based lubricant to the moving joints. |
| التلفزيون لا يتناسب مع الحامل. | نمط VESA أو حجم/وزن التلفزيون غير صحيح. | Verify your TV's VESA pattern and weight against the mount's specifications. This mount supports VESA up to 400x400mm and TVs up to 45kg (99lbs). |
8. المواصفات
| ميزة | التفاصيل |
|---|---|
| رقم الموديل | LPA36-463A |
| ماركة | لومي |
| نوع التركيب | حامل حائط كامل الحركة |
| مادة | معدن |
| توافق حجم الشاشة | 37" - 70" |
| سعة الوزن | 45 كجم (99 رطل) |
| التوافق مع VESA | Up to 400x400 mm |
| امتداد من الجدار | 95 ملم (مُنسحب) إلى 475 ملم (ممتد) |
| مدى الإمالة | Adjustable (vertical) |
| نطاق دوار | Up to 90 degrees left/right |
| أبعاد الشحن | 51.4 × 22.2 × 7 سم؛ 2.52 كجم |
9. الضمان والدعم
Lumi products are manufactured with quality and durability in mind. For specific warranty details, please refer to the warranty card included with your product or visit the official Lumi webالموقع. احتفظ بإيصال الشراء كإثبات للشراء.
For technical support, missing parts, or any questions regarding the installation or operation of your Lumi LPA36-463A TV Wall Mount, please contact your local retailer or Lumi customer service.
معلومات الاتصال: (Please refer to your product packaging or Lumi's official web(للحصول على أحدث معلومات الاتصال، يرجى زيارة الموقع الإلكتروني.)
