1. المقدمة
The Sharkoon RGB SLIDER WT is a versatile mid-tower PC case designed for optimal functionality and aesthetic appeal. It features an integrated RGB LED strip on the front panel, offering customizable lighting effects. The case supports various component configurations, including multiple cooling fan options and extensive storage capabilities. A tempered glass side panel provides a clear view من المكونات الداخلية.

الصورة 1.1: الجانب الأمامي view of the Sharkoon RGB SLIDER WT PC Case, showcasing the RGB LED strip and tempered glass side panel.
2. محتويات العبوة
يرجى التأكد من وجود جميع العناصر في الحزمة:
- Sharkoon RGB SLIDER WT PC Case
- 1x 120mm Rear Fan (pre-installed)
- Accessory Box (containing screws, cable ties, and this manual)
3. المواصفات
| ميزة | التفاصيل |
|---|---|
| الأبعاد (الطول × العرض × الارتفاع) | 40 × 19 × 45.6 سم |
| وزن | 6 كجم |
| نوع الحالة | برج ميدي |
| مادة اللوحة الجانبية | زجاج مقسّى |
| طريقة التبريد | تبريد الهواء |
| منافذ الإدخال / الإخراج الأمامية | 2x USB 3.0، 1x USB 2.0، مدخل/مخرج صوت |
| حجرات القيادة | 2x 3.5" HDD, 5x 2.5" SSD (2 shared with 3.5") |
| أقصى طول GPU | 335mm (without front fans) |
| أقصى ارتفاع لمبرد وحدة المعالجة المركزية | 157 ملم |
| أقصى طول PSU | 175 ملم |
| مراوح مثبتة مسبقًا | مروحة خلفية واحدة مقاس 120 مم |
| دعم المروحة (الأمامي) | 3 × 120 مم |
| دعم الجماهير (أعلى الصفحة) | 2x 120 مم أو 2x 140 مم |
| دعم المروحة (الخلفي) | 1 × 120 مم |

Image 3.1: Diagram illustrating the dimensions of the Sharkoon RGB SLIDER WT PC Case.
4. الإعداد والتثبيت
4.1. التحضير
Before beginning installation, ensure the PC case is placed on a stable, flat surface. Unpack all components and verify against the package contents list. It is recommended to wear an anti-static wrist strap to prevent damage to sensitive electronic components.
4.2. تركيب اللوحة الأم
- Install the I/O shield into the designated slot at the rear of the case.
- Align the motherboard with the standoffs inside the case. Ensure the I/O ports align with the I/O shield.
- قم بتأمين اللوحة الأم باستخدام البراغي المتوفرة.

الصورة 4.1: الداخلية view of the PC case, showing the motherboard mounting area and pre-installed rear fan.
4.3. تركيب وحدة إمداد الطاقة (PSU)
- Locate the PSU tunnel at the bottom rear of the case.
- Slide the PSU into the tunnel from the rear of the case, ensuring the fan faces downwards (if applicable, for bottom intake).
- قم بتأمين وحدة إمداد الطاقة باستخدام البراغي من الجزء الخلفي للعلبة.
4.4. تركيب جهاز التخزين
The case supports 3.5" HDDs and 2.5" SSDs.
- محركات الأقراص الصلبة مقاس 3.5 بوصة: Install into the drive cage located within the PSU tunnel.
- أقراص SSD مقاس 2.5 بوصة: Mount onto the dedicated SSD trays behind the motherboard tray or on top of the PSU tunnel.

Image 4.2: Rear interior view, highlighting cable management options and locations for 2.5" SSDs and 3.5" HDD cage.
4.5. Expansion Card Installation (e.g., GPU)
- قم بإزالة أغطية فتحة PCIe الضرورية من الجزء الخلفي للعلبة.
- Insert the expansion card into the corresponding PCIe slot on the motherboard.
- Secure the card with screws.
4.6. Fan Installation (Optional)
Additional fans can be installed at the front and top of the case.
- مراوح أمامية: Remove the front panel to access the mounting points for up to three 120mm fans.
- كبار المشجعين: Mount up to two 120mm or 140mm fans to the top panel.
4.7. إدارة الكابلات
Utilize the cutouts and tie-down points behind the motherboard tray to route and secure cables. This improves airflow and maintains a clean interior aesthetic.
5. تعليمات التشغيل
5.1. تشغيل
After all components are installed and cables connected, close the side panels. Connect the power cable to the PSU and a wall outlet. Press the power button on the top panel of the case to start your system.

الصورة 5.1: الأعلى view of the case, detailing the front I/O panel with USB ports and audio jacks.
5.2. التحكم في إضاءة RGB
The front RGB LED strip can be controlled in two ways:
- Built-in Controller: Use the dedicated RGB control button on the top panel to cycle through 14 preset lighting modes.
- Motherboard ARGB Sync: Connect the RGB cable from the case to a compatible 3-pin 5V ARGB header on your motherboard. The lighting can then be controlled via motherboard software (e.g., Asus Aura Sync, MSI Mystic Light Sync, Gigabyte Fusion, ASRock Polychrome SYNC).
5.3. Front Panel Ports
توفر لوحة الإدخال/الإخراج الأمامية وصولاً سهلاً إلى:
- 2x USB 3.0 ports for high-speed data transfer.
- 1x USB 2.0 port for general peripherals.
- Audio In (microphone) and Audio Out (headphone) jacks.
6. الصيانة
6.1. التنظيف
- الخارج: امسحي الأسطح الخارجية بقطعة ناعمة ، دamp قماش. تجنب المنظفات الكاشطة.
- فلاتر الغبار: Regularly remove and clean the dust filters (e.g., top magnetic filter, bottom PSU filter) to maintain optimal airflow and prevent dust buildup inside the case.
- الداخلية: Use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning the interior.
6.2. تدفق الهواء
Ensure that the case has adequate clearance around it for proper airflow. Avoid blocking intake or exhaust vents. Regularly check fan operation to ensure they are spinning correctly.
7. استكشاف الأخطاء وإصلاحها
7.1. النظام لا يعمل
- Verify that the power cable is securely connected to both the PSU and the wall outlet.
- تأكد من أن مفتاح الطاقة الخاص بوحدة إمداد الطاقة (PSU) في وضع التشغيل.
- تأكد من أن كابل زر الطاقة الموجود باللوحة الأمامية متصل بشكل صحيح بموصل اللوحة الأمامية للوحة الأم.
- Confirm all internal power connections (24-pin ATX, CPU power, GPU power) are secure.
7.2. Fans Not Spinning
- تحقق من توصيلات الطاقة الخاصة بالمروحة باللوحة الأم أو وحدة التحكم بالمروحة.
- Ensure fan headers are enabled in the motherboard BIOS/UEFI settings.
7.3. إضاءة RGB لا تعمل
- If using the built-in controller, press the RGB button to cycle modes.
- If using motherboard sync, ensure the ARGB cable is correctly connected to a 3-pin 5V ARGB header (not 4-pin 12V RGB).
- Verify that the motherboard's RGB software is installed and configured correctly.
7.4. منافذ USB/الصوت في اللوحة الأمامية لا تعمل
- Check that the USB 3.0, USB 2.0, and HD Audio cables from the front panel are securely connected to the corresponding headers on the motherboard.
- Ensure motherboard drivers are installed.
8. الضمان والدعم
Sharkoon products are manufactured to high-quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official Sharkoon website. For technical support, product inquiries, or service requests, please contact Sharkoon customer support through their official channels.
For further assistance, please visit the official Sharkoon webموقع: www.sharkoon.com





